Education and Career Forum

HI, i am student of final year engineering, my branch is Electronics and telecommunication, my aim is to go in the railways,so to give IES exam of upsc is d right choice? and what should i do for d praparation for the same.
kindly help me

Dear friend,

If you want to go to the railway jobs, you can appear in the IES exam.

IES exam is conducted by the UPSC, every year for the recruitment of graduate engineers in the civil service engineering job profiles.

After you give the IES exam,the chances for going to railways become brighter.

You can start the preparation of IES from right now..There are books and study materials you can find in the nearby book stores and even from online you can have those.

Just keep your eyes on the official site of the UPSC: www.upsc.gov.in

All the best!

dear friend

after completion of your b.tech u can apply for UPSC (IES).

after that there is a huge chance of joining Indian railway.

all d best.

dear friend, as you a student of ECE so IES can be very good career option for you.
But you can appear in IES after completion of your engineering degree, & your age must be 21 to 30 years.
for preparation you can go through basics of your subjects, one point always remember friend that for success in any exam you should be very much clear about your subjects, it is very much helpful..

good luck.

dear friend

UPSC is very difficult to crack.

for this u have to work hard and study properly.

u can join various coaching centers offering coaching for IES.

u can also prepare yourself in home.

u have to practice objective books like

r.k rajput

g.k publishers

and many more.

u have study your text books thoroughly as well.

all d best.

hi,
there is many ebook available in the websites.here it is not possible to submit the ebook.so i will advice you to download this book from the websites
www.freebookdownloads.com.
also g.k.publications has good books.

hi,

Ability Level IES Score Range

Outstanding 800 to 1000
Excellent 675 to 800
Very good 550 to 675
Good 425 to 550
Above average 300 to 425
Average 100 to 300
Below average Below 100

you need above 400 to get a seat.

Yes, you are on the right path. For the preparation you can avail different books available in market. You can join coaching classes and test series

Hello,

For preparation of INDIAN ENGINEERING SERVICES, you must work hard because this is the one of toughest exam in india.
you can join some coaching institutes for prepare, there are many institution offers this coaching.
so you need to search out for the best result.
anyway prepare well for it....
best wishes!!!!

HI!

Yes, IES is the right choice for joining indian railways.

If you are confident of yourself then you can crack IES exam by self study otherwise you can take help of coaching institutes.

Tips for cracking IES exam:

For cracking IES exam it is necessary that you are thorough with the basics.

Selection of right books & study materials is key to success in IES exam.

Try to sole previous year question paper & model paper. Analyze your weakness & work on it.

Read a good newspaper,journals,yojana,mainstream, competition magazines for GS portion.

Originally Posted by mihir.joglekar2009

HI, i am student of final year engineering, my branch is Electronics and telecommunication, my aim is to go in the railways,so to give IES exam of upsc is d right choice? and what should i do for d praparation for the same.
kindly help me

yes, ofcourse IES will be best for you. if you pass this exam then you will surely get a job in indian railways. the exam is very tough and many students aplly for the same. so you must prepare well for it. the details of the exam will be available on
www.upsc.gov.in

Originally Posted by mihir.joglekar2009

HI, i am student of final year engineering, my branch is Electronics and telecommunication, my aim is to go in the railways,so to give IES exam of upsc is d right choice? and what should i do for d praparation for the same.
kindly help me

yes, ies exam is better option , or right choice , to be an engineer ,

for this exam the syllbus are the same as or equivalent to gate exam.


1. Materials and Components :
Structure and properties of Electrical Engineering materials; Conductors, Semiconductors and Insulators, magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Super-conducting materials.

(more content follows the advertisement below)
A D V E R T I S E M E N T



Passive components and characteristics Resistors, Capacitors and Inductors; Ferrites, Quartz crystal Ceramic resonators, Electromagnetic and Electromechanical components.
2. Physical Electronics, Electron Devices and ICs:
Electrons and holes in semiconductors, Carrier Statistics, Mechanism of current flow in a semiconductor, Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction transistor; Field effect transistors; Power switching devices like SCRs, GTOs, power MOSFETS; Basics of ICs - bipolar, MOS and CMOS types; basic of Opto Electronics.

3. Signals and Systems
Classification of signals and systems: System modelling in terms of differential and difference equations; State variable representation; Fourier series; Fourier transforms and their application to system analysis; Laplace transforms and their application to system analysis; Convolution and superposition integrals and their applications; Z-transforms and their applications to the analysis and characterisation of discrete time systems; Random signals and probability, Correlation functions; Spectral density; Response of linear system to random inputs.

4. Network theory
Network analysis techniques; Network theorems, transient response, steady state sinusoidal response; Network graphs and their applications in network analysis; Tellegen’s theorem. Two port networks; Z, Y, h and transmission parameters. Combination of two ports, analysis of common two ports. Network functions : parts of network functions, obtaining a network function from a given part. Transmission criteria : delay and rise time, Elmore’s and other definitions effect of cascading. Elements of network synthesis.

5. Electromagnetic Theory
Analysis of electrostatic and magnetostatic fields; Laplace’s and Poisson’s equations; Boundary value problems and their solutions; Maxwell’s equations; application to wave propagation in bounded and unbounded media; Transmission lines : basic theory, standing waves, matching applications, microstrip lines; Basics of wave guides and resonators; Elements of antenna theory.

6. Electronic Measurements and instrumentation
Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working : analog and digital, comparison, characteristics, application. Transducers; Electronic measurements of non electrical quantities like temperature, pressure, humidity etc; basics of telemetry for industrial use.




ELECTRONICS & TELECOMMUNICATION ENGINEERING PAPER – II

>
(For both objective and conventional type papers)

1. Analog Electronic Circuits :
Transistor biasing and stabilization. Small signal analysis. Power amplifiers. Frequency response. Wide banding techniques. Feedback amplifiers. Tuned amplifiers. Oscillators. Rectifiers and power supplies. Op Amp, PLL, other linear integrated circuits and applications. Pulse shaping circuits and waveform generators.

2. Digital Electronic Circuits :
Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaguh map and applications; IC Logic gates and their characteristics; IC logic families : DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic Circuits; Half adder, Full adder; Digital comparator; Multiplexer Demulti-plexer; ROM an their applications. Flip flops. R-S, J-K, D and T flip-flops; Different types of counters and registers Waveform generators. A/D and D/A converters. Semiconductor memories.


(more content follows the advertisement below)
A D V E R T I S E M E N T


3. Control Systems :
Transient and steady state response of control systems; Effect of feedback on stability and sensitivity; Root locus techniques; Frequency response analysis. Concepts of gain and phase margins: Constant-M and Constant-N Nichol’s Chart; Approximation of transient response from Constant-N Nichol’s Chart; Approximation of transient response from closed loop frequency response; Design of Control Systems, Compensators; Industrial controllers.

4. Communication Systems :
Basic information theory; Modulation and detection in analogue and digital systems; Sampling and data reconstructions; Quantization & coding; Time division and frequency division multiplexing; Equalization; Optical Communication : in free space & fiber optic; Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite Communication.

5. Microwave Engineering :
Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circuits, Microstrip circuits, Microwave Antennas, Microwave Measurements, Masers, lasers; Microwave propagation.
Microwave Communication Systems terrestrial and Satellite based.

6. Computer Engineering :
Number Systems. Data representation; Programming; Elements of a high level programming language PASCAL/C; Use of basic data structures; Fundamentals of computer architecture; Processor design; Control unit design; Memory organisation, I/o System Organisation. Microprocessors : Architecture and instruction set of Microprocessors 8085 and 8086, Assembly language Programming. Microprocessor Based system design : typical examples. Personal computers and their typical uses.

if you want to preparation for IeS exam then you can download tips,questions,solutions form internet regarding last year papers.
for the preparation of ias exam a very hard labor , dedication , devotion and concentration is required as it is toughest exam in india
this exam is conducted in three phase i.e.
prelim, mains, and interview
for latest updates please visit the link given below:
www.upsc.gov.in
all the best

the exam is very tough and many students apply for the same. so you must

prepare well for it.you can join various coaching centers offering coaching for

IES.youu can also prepare yourself in as a self study in home.this is the west

way for the preparation of the IES exams,also you can get online practice for

this exams.

dear friend,
you are going for IES examination.
so,study your books thoroughly.
otherwise you can admit in a coaching center or private teacher.
solve previous year question
or off course Internet .
best of luck

Do railway engineers get the best exposure in terms of enhancement and application of knowledge.




Megha

can i prepare for ies & psu's without joining coaching institute because it is not possible 4 me to leave the job. So can these exams
be cracked by means of self study.

Originally Posted by mihir.joglekar2009

HI, i am student of final year engineering, my branch is Electronics and telecommunication, my aim is to go in the railways,so to give IES exam of upsc is d right choice? and what should i do for d praparation for the same.
kindly help me

well nice to hear that you opting for IES and want to join railways..

what you do write upsc exam for IES and by the way this is not very easy to crack dude,

take any coaching first then write after having..ies then you will be having..lot of chances of joining...railways.

for more details visit
www.upsc.gov.in

SIR...

I am paras Sahni and i have just completed by B.E in Computer Science this year itself and i want to prepare for the UPSC IES exam in 2011..Kindly help me that what subjects i can choose as i am a CSE student..

Hello,

Well its nice that you are appearing for this exam.If you think you can prepare on your own than its well and good otherwise i advice you to go for coaching.Better go for coaching so that you can make through at one go other.I have attached syllabus for this.You can refer it.

Yes off course but it depends upon the individuals on how they take it.Well if you are serious than definitely the answer is yes if not no.

Hi,

Well i have attached the syllabus for this exam.Its good that you are attempting for this exam but i would like to say that its quite tuft therefore its always better if you can take coaching.If you feel that you can do it on your own than its well and good other wise its better you take coaching and crack it at one go.

hello sir,
due to some reason i missed general ability test.........m i elligible for next 4 exam?????

hello sir,
due to some reason i missed ies general ability test..........m i elligible for remaining exams of ies??????

hello sir,
i am pursin b.tech in information tecnology.....is there is any good chances for me to appear in ies,,,,what should i do???

How many seats alloted for IES exam

hello...sir..I'll complete my B.TECH in 2011-12. But I get the degree certificate on the day of convocation(will be held for this batch in jan 2013)...but i want to write for IES in june 2012 it self. But i can have my grade sheets for entire four years by june 2012...will there be any problem in future during posting..? when will the results come? when will the actual posting for ies?

i am a student pursuing my m.tech in control systems.can know i the exam details and interview pattern.wat would be the salary during training and growth in the carrer