#1  
16th March 2012, 11:33 AM
Unregistered
Guest
 
Posts: n/a

How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?


sir im Sofia Banu and im 17 years old. im studying Diplom in Metallurgical Engg in Govt. Polytechnic Visakhapatnam. im very interested in C.I.D. say me whether im eligible for this... please suggest me.





Related Questions:
  1. How can I join CD while studying diploma 1st year
  2. Eligibility to join Indian Air Force for Diploma in Metallurgical Engineering final year student?
  3. How to do correspondence course in engineering after completion of Diploma in metallurgical engineering?
  4. Am I eligible for Kerala PSC SI after completing Polytechnic diploma in mechanical engineering from government polytechnic?
  5. Am I eligible to get diploma course in government polytechnic college with 55% marks in SSLC?
  6. Can I do diploma in Civil engineering after 10th?
  7. Is it possible for me to do diploma in IT after completion of 10th standard? -- [New]
  8. Eligibility to study B.Tech(Mechanical Engineering) after completing Diploma in Metallurgical Engineering?
  9. How to join civil engineering in Polytechnic?
  10. How can I get information about polytechnic entrance exam application?
  11. Can I study engineering, diploma or polytechnic while studying engineering
  12. What should be done after Diploma engineering from Singapore Polytechnic?
  13. Procedure to join engineering after diploma in metallurgy from government polytechnic college, Karnataka?
  14. What are the jobs available in government and private sector after completing diploma in metallurgical engineering?
  15. Am I eligible to write IIT JEE? I am pursuing diploma(final year student) in electronics engineering from government polytechnic college under UPTU
  16. What is the career in Metallurgy?
  17. How can I join RAW or NIA after passing diploma in Automobile Engineering from Government Polytechnic?
  18. After completing ITI Mechanical Electronics which are the courses offered? -- [Most Discussed]
  #2  
5th July 2012, 12:23 PM
sherleytwain
Senior Member+++++
 
Join Date: Feb 2010
Posts: 3,215
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

Crime Investigation Department (CID) which is sometimes referred as Crime Brach is a wing of several state police forces in India. CID is given cases that requires technical expertise, or complicated murder cases. This department is often given cases that are related to several districts or even sometimes several states in India.

Everyone who is interested in becoming CID officer need to appear in UPSC Indian Civil Services Examination in three level:

IPS cadre

State Public Service Commissions

District Police Headquarters

There are other eligibility to appear in the qualification exam

You should be Indian National

Graduate degree in any course from recognized university in India for a officer level post.

You should secure at least 60 per cent marks in the graduate degree.

Candidates who have only completed 12th class are also eligible for post of constable in CID.

The age limit for General category students is between 21 to 25

21 to 30 is the age limit for SC/ST and OBC candidates.

The selection process is

Written Test

Interview

Physical Fitness test
  #3  
5th July 2012, 12:59 PM
sandeepsaini.saini522
Senior Member+++++
 
Join Date: May 2012
Location: Hisar
Posts: 4,167
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

hi,

ELIGIBILITY CRITERIA FOR CID EXAM

To join CID you need to appear for CGPE exam i.e. Combined Graduate preliminary Exam which is conducted by SSC board every year.

Those candidate are graduate from any recognized university with any discipline are eligible for CID exam.(Criminology)

But your age should be in between 20 to 27 years old.Age relaxation is provide for SC/ST/OBC category as per govt rule.

The maximum attempts for SC/ST candidate is Unlimited. For OBC candidate it is 7 years and for general candidate it will be 5 years.

Also you must be in citizen in India.

The selection process is contain in two stage

In first stage written test:-

1)General question ---------- 200marks
2)English -------------------200 marks

In second stage you can faced an interview which is contain 100 marks.

a. Part I - Written Examination carrying: 400 marks
i. General Test
ii. General Intelligence and Reasoning
iii. General Awareness
iv. Numerical Ability

b. Part II - Personality Test (Interview): 100 marks.
i. English Language
ii. Language Comprehension
iii. Communication / Writing
iv. Ability Test

You can also visit at the below web site for more information on CID
www.ssc.nic.in
  #4  
5th July 2012, 01:04 PM
Shaenma
Senior Member+++++
 
Join Date: Mar 2011
Location: Howrah
Posts: 4,355
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

CID Officer Eligibility Criteria:-

=>You need to be a graduate in any discipline from a recognized university.

=>Your age should be between 20-27 years.

Several Posts you can get based on your experience:-

>>Detective Inspector

>>Detective Constable

>>Detective Chief Inspector

>>Detective Sergeant

>>Detective Superintendent

>>Detective Chief Superintendent


Selection procedure includes:- I. Written exam II. Personal Interview

Then you have to work as a trainee and then you will be known as the Trainee Detective Constable. With time if you are able to impress with your performance then there will be a promotion in any one of the posts mentioned above.

Syllabus for the exam:-

Part I:
>>General Test
>>General Reasoning and Intelligence
>>General Awareness
>>Numerical Ability


Part II:
>>English Language
>>Comprehension
>>Writing Ability Test


Visit:- http://www.upsc.gov.in
Reply With Quote
  #5  
2nd August 2012, 05:31 PM
mitesh1995
Junior Member
 
Join Date: Jun 2012
Location: bhavanagar
Posts: 111
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

hi friend.....



CID Officer Eligibility Criteria:-

=>You need to be a graduate in any
discipline from a recognized university.

=>Your age should be between 20-27 years.
Several Posts you can get based on your
experience:-

>>Detective Inspector

>>Detective Constable

>>Detective Chief Inspector

>>Detective Sergeant

>>Detective Superintendent

>>Detective Chief Superintendent
Selection procedure includes:- I. Written
exam II. Personal Interview
Then you have to work as a trainee and
then you will be known as the Trainee
Detective Constable. With time if you are able
to impress with your performance then
there will be a promotion in any one of the
posts mentioned above.
Syllabus for the exam:-

Part I:

>>General Test

>>General Reasoning and Intelligence

>>General Awareness

>>Numerical Ability

Part II:

>>English Language

>>Comprehension

>>Writing Ability Test

Visit:- http://www.upsc.gov.in

good luck.....
Reply With Quote
  #6  
2nd August 2012, 05:34 PM
mitesh1995
Junior Member
 
Join Date: Jun 2012
Location: bhavanagar
Posts: 111
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

Hi friend....


CID Officer Eligibility Criteria:-

=>You need to be a graduate in any
discipline from a recognized university.

=>Your age should be between 20-27 years.
Several Posts you can get based on your
experience:-

>>Detective Inspector

>>Detective Constable

>>Detective Chief Inspector

>>Detective Sergeant

>>Detective Superintendent

>>Detective Chief Superintendent
Selection procedure includes:- I. Written
exam II. Personal Interview
Then you have to work as a trainee and
then you will be known as the Trainee
Detective Constable. With time if you are able
to impress with your performance then
there will be a promotion in any one of the
posts mentioned above.
Syllabus for the exam:-

Part I:

>>General Test

>>General Reasoning and Intelligence

>>General Awareness

>>Numerical Ability
Part II:

>>English Language

>>Comprehension

>>Writing Ability Test


Visit:- http://www.upsc.gov.in


good luck
Reply With Quote
  #7  
14th August 2012, 04:52 PM
Dharm27
Senior Member+++++
 
Join Date: Apr 2012
Location: Bhavnagar
Posts: 2,682
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

hi friend,



CID stands for Criminal Investigation Department
for Applying CID you have Crack the Entrance exam of Civil Service Exam.

Qualification for CID:


=> A candidate Should have completed their Graduation in Any Stream with at least 55% from Recognize Universities.

=> Age Limit should Not exist 25 years for General Category. there is a relaxation is available for SC/ST category up to upper Age + 5 years.

Selection Process:

=> Written Test
=> Interview
=> Physical Fitness test

All the best
Reply With Quote
  #8  
12th September 2012, 06:06 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

Sir my Name is Venkatesh From Warangal (Dist)
sir I have completed my I.T.I.(fitter) & also completed my apprentice .sir i am intersted in doing metallurgical engineering.
Sir can u suggest me How?
How many polytecnic colleges are offering this Diploma in Andhra Pradesh Please give me the suggestion
Reply With Quote
  #9  
23rd September 2013, 02:35 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

how become cid officer after engineering??
Reply With Quote
  #10  
30th November 2013, 04:32 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

i m 26 year old can i become a cid officer
Reply With Quote
  #11  
23rd February 2014, 09:52 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

sir i am amresh from chhattisgarh..sir i am passout diploma in metallurgy ....what study doing me.
Reply With Quote
  #12  
5th August 2014, 05:29 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to join CID after studying diploma in Metallurgical Engineering in government polytechnic Visakhapatnam? Am i eligible for this?

iam completed my diploma,nw iam persuing b.tech?what are chances to future?
Reply With Quote
Do you have any question? or have anything to say?





Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0
vBulletin Optimisation by vB Optimise.
Please also check: