Switches used in power system of a satellite

#1 5th November 2009, 12:57 AM

I wish to know the kind of switches that are used in the power system of a satellite which can be controlled by microcontroller or microprocessors.

#2 22nd November 2009, 07:38 PM

@bala_niranjan

DiSEqC Switch and Satellite Multi-switch with 12 to 20V DC Voltage and 500mA Current are used in the power system of a satellite.

#3 24th December 2009, 02:46 AM

http://www.starkelectronic.com/askpds.htm

visit this site here you will get information about switeches and hoe it works.

#4 13th January 2010, 12:53 AM

AMS 5822 AND AMS4822 ARE specially designed to be used with satellite systems using 22Khz pulse tone

#5 13th January 2010, 10:09 AM

what is the power source of an satellite in outer space?
i mean they keep on rotating for these many days,from were do they get all the power

#6 24th January 2010, 08:30 PM

AMS 5822 AND AMS4822 ARE are the specially designed to be used with satellite systems using 22khz pulse tone they keep on rotating for these many days

#7 28th January 2010, 12:06 AM

The switch design is used for regulated 5 and 15 V. for satellite system Power Adaptor 24VDC 600mA(PS-6M

#8 4th February 2010, 04:42 PM

The MMIC switch covers the range of 3.2∼3.6GHz. According to the on-wafer measurement, the fabricated MMIC switch with miniature size of 1.6mm×1.3mm demonstrates insertion loss below 2dB, isolation above 56.8dB,

#9 22nd February 2010, 03:47 PM

Switches used in power system of a satellite are Multiswitch for 2 or 3 Satellite System with built in 22 KHz Generator for use with Directv integrated multiswitch or Phase III Satellite System.( with power supply) Power Adaptor 24VDC 600mA(PS-6M).

#10 19th July 2010, 12:16 AM

AMS 4822
AMS 5822
are the specially designed to be used with satellite systems using 22 Khz pulse tone they keep on rotating for many days

#11 25th July 2010, 12:50 AM

here very high quality of the switches is uses which is also fabricated on the microprocessor based.these swith names is as followings.
MMIC
AMS 5822

#12 15th April 2011, 07:11 PM

Dear,
Switches used in power system of a satellite are Multiswitch for 2 or 3 Satellite System with built in 22 KHz Generator for use with Directv integrated multiswitch or Phase III Satellite System.( with power supply) Power Adaptor 24VDC 600mA(PS-6M).

For more details you can visit the following link-

http://www.starkelectronic.com/askpds.htm

Thanks.

#13 16th June 2011, 04:13 PM

Can i use micro controller in satellite power system.. i mean any application that can be controlled by it

#14 15th January 2012, 11:24 PM

Dear,
Switches used in power system of a satellite are Multiswitch for 2 or 3 Satellite System with built in 22 KHz Generator for use with Directv integrated multiswitch or Phase III Satellite System.( with power supply) Power Adaptor 24VDC 600mA(PS-6M).

For more details you can visit the following link-

http://www.starkelectronic.com/askpds.htm

Switches used in power system of a satellite

Please also check: