#1
4th May 2010, 10:01 PM




GATE Exam Pattern for Mechanical Engineering?
I wanted to know about gate examination pattern (mechanical)..and which is the best material for preparation of gate?

#2
5th May 2010, 09:08 PM




Re: GATE Exam Pattern for Mechanical Engineering?
Dear friend
The previous year question paper of all the major branches are available on the various websites. You can go through them and get an idea regarding the pattern. Visit:http://www.onestopgate.com/downloads/ Thank You All the best 
#3
5th May 2010, 11:21 PM




Re: GATE Exam Pattern for Mechanical Engineering?
dear friend
The GATE examination consists of a single paper of 3 hours duration, which contains 60 questions carrying a maximum of 100 marks. The question paper will consist of only multiple choice objective questions. There will be negative marking for wrong answers, as given in question paper pattern. best study material for mechanical engineering IES Made Easy Books ,Oswal Publication. ok all the best. 
#4
5th May 2010, 11:28 PM




Re: GATE Exam Pattern for Mechanical Engineering?
gate exam is toughest exam for MTECH so it's question have
some level.... so for gate hard labour is essential... for mechanical go with whole syllabus thermodynamics,theory of machine,fluid mechanics,strength of materials,electrical machine ,auto cad,mechatronics.. and mathematics as well as english(verbal)... gate forum's materials are too good.... question contains 1 or 2 marks for each right answer .... duration 3 hour ... conceptual knowledge is essential for that exam.. good luck... 
#5
29th June 2010, 09:23 PM




Re: GATE Exam Pattern for Mechanical Engineering?
Quote:
Below are the details single paper of 3 hours duration 60 questions carrying a maximum of 100 marks Objective type questions Optical Response Sheet (ORS) Negative marking 
#6
31st July 2010, 03:10 AM




Re: GATE Exam Pattern for Mechanical Engineering?
Hello friend
The Graduate Aptitude Test in Engineering( GATE ) is conducted for admission in various PG programs in Engineering / Technology / Architecture / Science / Pharmacy streams. GATE Exam Pattern : The GATE exam consists of 60 questions of 100 marks. The total time allotted is 3hrs. All the questions are are multiple choice questions i.e objective types. 
#7
13th August 2010, 01:38 AM




Re: GATE Exam Pattern for Mechanical Engineering?
hello friend
you can get previous years gate question papers in the given below sites, through which you will understand GATE Exam Pattern for Mechanical Engineering. 1.www.gateforum.com. 2.www.onestopgate.com all the best......... 
#8
13th August 2010, 09:41 PM




Re: GATE Exam Pattern for Mechanical Engineering?
The exam pattern under maths part as folllows:
Mathematical Logic: Propositional Logic; First Order Logic. Probability: Conditional Probability; Mean, Median, Mode and Standard Deviation; Random Variables; Distributions; uniform, normal, exponential, Poisson, Binomial. Set Theory & Algebra: Sets; Relations; Functions; Groups; Partial Orders; Lattice; Boolean Algebra. Combinatorics: Permutations; Combinations; Counting; Summation; generating functions; recurrence relations; asymptotics. Graph Theory: Connectivity; spanning trees; Cut vertices & edges; covering; matching; independent sets; Colouring; Planarity; Isomorphism. Linear Algebra: Algebra of matrices, determinants, systems of linear equations, Eigen values and Eigen vectors. Numerical Methods: LU decomposition for systems of linear equations; numerical solutions of nonlinear algebraic equations by Secant, Bisection and NewtonRaphson Methods; Numerical integration by trapezoidal and Simpson’s rules. rest is b.tech syllabus. 
#9
15th August 2010, 05:51 PM




Re: GATE Exam Pattern for Mechanical Engineering?
Dear friend,
As you want to know about the GATE Exam Pattern for Mechanical Engineering, Then there is no any need of worry. You can get it from the following websites, www.gateforum.com So just go and find the details on the given websites. 
#15
10th December 2010, 10:41 PM




Re: GATE Exam Pattern for Mechanical Engineering?
dear,
here is the whole pattern of the paper below: Question numbers 1 to 25 are 1 mark questions. They have a negative marking of 1/3 mark. Question numbers 26 to 55 are 2 marks questions They have a negative marking of 2/3 mark. Four questions, number 52, 53 and 54, 55 are the linked questions the answer of the second question of the paper depends on the answer of the first question. The second answer of the pair will be evaluated only when the first one is answered correct. The negative marking is for the first question only as the next question is not going to be evaluated only. Question numbers 56 to 60 are all 1 mark questions and a negative marking of 1/3 mark. The last questions are also from general aptitude ,they are of 2 marks They have a negative marking of 2/3 mark. best of luck 
#16
13th December 2010, 05:07 PM




Re: GATE Exam Pattern for Mechanical Engineering?
The GATE examination is a single paper examination which has duration of three hours. There are multiple choice questions. The total marks are 100 and will carry a negative score for all wrong answer. You can refer to different books and practice as many question paper as to master in the GATE exam.

#18
7th June 2011, 12:25 PM




Re: GATE Exam Pattern for Mechanical Engineering?
Hi everybody.. This is Priya doing M.Tech in Advanced Manufacturing [Integrated5yrs]. One of my frnds told that a student a can write GATE exam in third year itself and the govt. ll provide scholarship if we pass. Is it true?? If true, is it applicable to me, as i am doing integrated course??

#23
6th October 2011, 02:44 AM




Re: GATE Exam Pattern for Mechanical Engineering?
hy,
As you want to know about the GATE Exam Pattern for Mechanical Engineering, for mechanical go with whole syllabus thermodynamics,theory of machine,fluid mechanics,strength of materials,electrical machine ,auto cad,mechatronics.. and mathematics as well as english(verbal)... single paper of 3 hours duration 60 questions carrying a maximum of 100 marks Objective type questions The previous year question paper of all the major branches are available on the various websites. You can go through them and get an idea regarding the pattern. Visit:http://www.onestopgate.com/downloads/ 
#24
6th October 2011, 02:53 AM




Re: GATE Exam Pattern for Mechanical Engineering?
Following is the syllabus for GATE of mechanical Engineering
Mechanical Engineering Engineering Mechanics Introduction to Mechanisms Mechanisms and Simple Machines More on Machines and Mechanisms Basic Kinematics of Constrained Rigid Bodies Planar Linkages Cams Gears Other Mechanisms Engineering Thermodynamics Fluid Mechanics Heat Transfer Pro_Engineer Robotics Machines Kinematics Strength of Materials Machine Elements Machine Design Finite Elements Engineering Mathematics Linear Algebra Calculus Complex Analysis Vector Calculus Differential Equations Probability Numerical Methods Transform Theory Fourier Transform Laplace Transform ZTransform APPLIED MECHANICS AND DESIGN Engineering Mechanics: Equivalent force systems Equations of equilibrium Strength of Materials: Cold and Hot Working Creep Ductility Engineering and Applications Factor of Safety Review Hardness Heat Treatment Hookes Law Material Strength Malleability Strain Strength of Materials Summary and Overview Stress Cylinder Stress and Deflection with Applied Torsion Toughness Von Mises Criterion ( Maximum Distortion Energy Criterion ) Work ( Strain ) Hardening Youngs Modulus Vibrations The marking scheme is as under: Question numbers 1 to 25 are 1 mark questions. They have a negative marking of 1/3 mark. Question numbers 26 to 55 are 2 marks questions They have a negative marking of 2/3 mark. Four questions, number 52, 53 and 54, 55 are the linked questions the answer of the second question of the paper depends on the answer of the first question. The second answer of the pair will be evaluated only when the first one is answered correct. The negative marking is for the first question only as the next question is not going to be evaluated only. Question numbers 56 to 60 are all 1 mark questions and a negative marking of 1/3 mark. The last questions are also from general aptitude ,they are of 2 marks They have a negative marking of 2/3 mark. 
#25
6th October 2011, 12:15 PM




Re: GATE Exam Pattern for Mechanical Engineering?
hi friend,
The GATE examination consists of a single paper of 3 hours duration which contains 65 questions carrying a maximum of 100 marks. The question paper will consist of only objective questions. it consists of 35 2 marks question an30 1mark questions negative marking will be there 
#29
15th September 2012, 10:19 AM




Re: GATE Exam Pattern for Mechanical Engineering?
hey dude...
dis z Birendra doin mech in goa university. in uo coment u had advised 2 refer some IES and Oswald publication books for mach GATE. it wud b nice f u 2 specify the names of d respective conceptual and problm books. i am still a baby for this kinda exam.....i.e FE sem. so plzz guide me.... 
Related Topics: 

Thread  Replies  Last Post 
Gate exam mechanical engineering previous year papers for last 10 years?  38  25th August 2013 11:55 AM 
GATE cutoff score for Mechanical Engineering in Indian Oil Corporation?  50  25th June 2013 01:24 PM 
