Education and Career Forum

what is the eligibity for admisson in engineenring in india...

Pass in XII class is the basic qualification required for engineering degree. Science students are only eligible to have admission. More over such students should have studied mathematics as an optional subject. Admission criteria are based on entrance test conducted on all India basis or at state level. Details on such exams can be collected from the web portal of the authority that carry out the exam.

There are basically two ways to get admission for Engineering in India. The first way is through entrance exams. Till this year there were several entrance exams including:

AIEEE

IIT-JEE


However from next year both these exams would be scrapped and replaced by a single exam called ISEET. The ISEET is expected to replace all the existing entrance exams for Engineering in the country. Although there is some opposition by states to use ISEET. While some are against the exam others want at least couple of years to use it.


Therefore you can either appear for ISEET entrance exam or some state level entrance exams. Now to appear for ISEET you will need to meet this criteria:


1. A minimum of 12th pass with Physics, Chemistry and Maths as the subjects.

2. At least 40 percent marks in 12th board.


The first criteria is same for all the other state level exams as well. While the percentage criteria could change from state to state. Some state exams would like 50 percent marks for General while 40 for SC/ST candidates.


The other way of getting admission for Engineering is through lateral entry. For admission via this scheme you will have to complete either B.Sc or diploma in Engineering after 10th standard.


After which you can get admission via lateral entry. Most of the colleges would grant admission except IITs. The admission process varies from college to college. Some would give admission on merit while others would want you to appear for LEET entrance exam or some other entrance exam.


In both case you need at least 60 percent marks either in diploma in Engineering or B.Sc course. There are some colleges which will also give admission if candidate has scored 50 percent marks.

Originally Posted by a.awez

what is the eligibity for admisson in engineenring in india...

>> First of all you have to complete your 12th science with the subjects of Physics, Chemistry and Maths as a mains subjects......

>> Then you can get Direct admission as according to your merit of marks in your city's colleges in Bachelor of Engineering (BE)...

>> But, If you are aspiring to take admission in B.Tech then you should have to apply for some engineering entrance exam.....

>> There are mainly two entrance exam for taking admission in B.Tech are:

1. AIEEE (All Indian Engineering Entrance Exam).
2. IIT-JEE (Indian Institute of Technology).

You have to apply for this entrance exam and have to crack it with good score......

All the Best

With Regards....
Dharm

Originally Posted by a.awez

what is the eligibity for admisson in engineenring in india...

Bachelor of Technology, abbreviated as B Tech is an undergraduate degree conferred on a student on a completion of four year course of engineering studies. But to get admission in an engineering college in India, you need to fulfill the eligibility criteria and clear the engineering entrance examinations. There are several engineering entrance examinations in India 2012 viz; IIT JEE, AIEEE, DCE, BITSAT, UPSEE, SCRA etc. It's mandatory for a candidate to appear in an entrance examination, either concerning to the institute or at national or state level. Subsequently, the shortlisted candidates get the call to attend the personal counseling session on the basis of their scores in the engineering entrance examination, and thereafter they are allotted the engineering college and the branch. The admission process in B Tech 2012 is almost similar in most of the colleges. Though, some details vary from one institute to another and from one entrance exam to another.
Eligibilty criteria

The general eligibility criteria for B Tech admission in India 2012 is specified below:
The candidate should have passed 10+2 or an equivalent from a recognized board/ University.
Those candidates who are appearing in 10+2 or an equivalent can also apply in AIEEE provisionally, if it will be completed by the time of counselling.
The upper age limit for the candidate is 25 but in case of SC/ST/PH candidates , the upper age is relaxed by 5 years.

Hi dear............
AS you are interested to join engineering field for this you have to be 10+2 pass from a recognize board & then you have to appear entrance exam , There are some engineering entrance exam which are as follows....



From this following entrance exam you have to be crack the exam & if you are having good rank then you can get good engineering college for admission .

The list of best engineering college:--

Jawaharlal Nehru Technological University (JNTU), Hyderabad


Manipal Institute of Technology (MIT), Manipal


National Institute of Technology (NIT), Hamirpur


Punjab Engineering College, Chandigarh


Govt. College of Engineering, Pune


Birla Institute of Technology (BIT), Sindri


Harcourt Butler Technological Institute (HBTI), Kanpur


Thapar Inst. Of Engineering & Technology, Patiala


Mumbai University Inst of Chemical Tech, Mumbai


Indian Institute of Information Technology (IIIT), Gwalior


Nirma Institute of Technology (NIT), Ahmedabad


University Inst of Engg and Tech, Chandigarh


P.E.S Institute of Technology, Bangalore


National Institute of Engineering (NIE), Mysore


Veermata Jijabai Technological Institute (VJTI), Mumbai


Madras Institute of Technology, Chennai


R.V. College of Engineering, Bangalore


Osmania University College of Engineering, Hyderabad


SSN College of Engineering, Chennai


S.G.S. Institute of Technology & Science, Indore


Mepco Schlek Engineering College, Sivakasi .


Good luck..................

10+2 with non-medical other way diploma with 3 years. with diploma you can go directly in 2nd year btech engg.

There is different eligibility criteria for taking admission in different engineering entrance exam. The must eligibility for every entrance exam is to pass class 12th.
There is additional eligibility criteria for different exam.
For IITJEE
The candidate must have studied Maths,Physics,Chemistry in 12th level examination.
The candidate must secure at least 60% marks in their examination for General and OBC candidates and 55% marks for SC/ST/PH candidates.
The candidate can attempt JEE only twice in a year, one with 12th class.

Eligibility criteria for AIEEE
The number of attempts which a candidate can avail at All India Engineering/Architecture Entrance Examination shall be limited to 03 (three) uniformly for all the candidates in consecutive years.
Candidate should get 50% in PCM in class 12th.

Good Luck

If I take maths as an optional I.e.5th subject in class 11&12th
.. Am I then also eligible for AIEEE & IIT's .....and other engeneering exams ..

Reply fast ..

I hav got 36 in maths,physics 66 and chemistry 80.will i be eligible to do b.e?

How much marks will be needed for engineering sheets in english

76 mark cut off........can i get engineering seat?

What is rule for students doing schools from abroad - like china. There the education system is different in international schools. how a candidate can do studies in india after doing 10th or 12th from china

The basic eligibility for admission to B.Tech. Engineering in India is 12th standard with Physics, Chemistry and Mathematics.

The admission to under Graduate Engineering conducted by almost all Institutes on the basis of scoring through entrance exams.

Here are mentioned two important and Nationally conducted Entrance exams with eligibility criteria:-

IIT - JEE - Indian Institute of Technology Joint Entrance Examination conducted by IIT for admossion to under Graduate Engineering courses in IITs all over India.

The eligible candidate must be an Indian national having either appear for the final 12th exam or pass in Science stream with 60% marks in aggregate from a recognised Board within the age of 17 to 25 years, can apply for IIT JEE.

AIEEE - All India Engineering Entrance Examination conducted every year by CBSE for under Graduate B.Techh. courses in the reputed Institutions all over India.

The eligible candidate being an Indian National having either appear for the final 12th exam or pass in Science stream with 50% marks from a recognised Board, can apply for AIEEE.

Hi...............
Friends,



*** You first complete your 12th stand. Your 12th stand main subjects,

Physics

Chemistry

Mathematics.

*** You are aspiring to take admission in B.Tech then you should have to apply for some Engineering Entrance exams.

AIEEE

IIT-JEE


You will got the good score.






All the best...............

Originally Posted by a.awez

what is the eligibity for admisson in engineenring in india...

you must have appeared 12th exam with science background

For getting admission into Engineering courses you have to pass 10+2 with Physics, Chemistry and Maths.

Those who have done Diploma in Engineering can get admission into 2nd year of Engineering Graduation through lateral entry scheme.

You have to appear for JEE to get admission into top Engineering colleges. Those who get a top rank will be eligible to get admission into the best engineering colleges.

The JEE will have objective type questions related to Physics, Chemistry and Maths. There will be negative marks for wrong answer so you have to be careful in attempting the answers.

Some of the top Engineering colleges in India are listed below:

-Indian Institute of Technology IIT - Kharagpur

-Indian Institute of Technology IIT - Kanpur

-Indian Institute of Technology IIT - Mumbai

-Indian Institute of Technology IIT - Delhi

-Indian Institute of Technology IIT - Chennai

-BITS - Pilani

-Indian Institute of Technology IIT - Roorkee

-Indian Institute of Technology IIT - Guwahati

-IT-BHU

-College of Engg, Anna University

-Indian School of Mines University

-BIT, Mesra

-Jadavpur University , Faculty of Engg & Tech - Calcutta

-PSG College of Technology - Coimbatore

-Delhi College of Engineering

Hai aspirant
To get admission in engineering course you must have completed 12th with Non Medical(Mathematics, Physics, Chemistry) in Science Stream.
After qualifying in the 12th,you need to write the engineering entrance exams like:
-->IIT-JEE
-->AIEEE
-->VITEEE
-->BITSAT
-->SRMEEE
-->EAMCET
These entrance exams will be conducted by the corresponding universities/institutions for admission into the engineering.

If you have qualified in the entrance exam,then you will be eligible to get admission into the engineering course.There are no extra eligiblity conditions required to get a admission into the engineering.Depending upon your entrance exam you will get a admission into the engineering colleges.
Thank You

Dear student,

Candidate should be an Indian National and should have passed the HSC (Std.XII) examination of Maharashtra State Board of Secondary and Higher Secondary Education or its equivalent examination with subjects English, Physics, Chemistry and Mathematics AND secured minimum 45% marks (minimum 40% marks in case of candidates of Backward class categories and Persons with Disability be longing only to Maharashtra State) in the subjects Physics, Chemistry and Mathematics added together AND Candidate should have a valid JEE Main 2013 Score (i.e. total score should be positive) for the year 2013-2014. Note: Maharashtra Candidates having valid JEE Main 2013 score and appearing for MT-CET 2013 will be required to submit single Application and Option form for the CAP. Such candidates will be given single allotment through CAP as per inter-se-merit.

There are basically two ways to get admission for Engineering in India. The first way is through entrance exams. Till this year there were several entrance exams including:

AIEEE

IIT-JEE

Be perfect in maths

Dear friend,you want to know the elligibilty for the admissions in Indian. Dear,for the admissions in India the basic requirement is that he must cleared his 12th from the non-medical stream with the physics,chemistry,and maths are main subjects. If you want to get degree from any good college then you have to appear enggeering entrance exam like jee-main OR state conducted various entrance exam. Best of Luck.

hi,
The following are Entrance exam for Engineering;-

Eligibility Criteria:

Aspiring candidates who have passed the 10+2 (Class XII) or on equivalent exam from a recognized board in India with 50% marks for general category and 40% marks for SC/ST/OBC/PH category students.

All the candidates who are appearing in the final year examination in the same year are also eligible to apply for the AIEEE 2013 entrance exam.

The upper age limit for the candidates to be eligible for the exam is 25 years. However, there is relaxation of 5 years for SC/ST/PH candidates.

A student can attempt the entrance examination consecutively for a maximum of three years.

All the best..............

u will be eligible after doing 12th with science streem with physics , chemistry maths....
and if u want to be a good engg, than it only possible after doing b.tech from a good college... so to get addmission in agood college of india u have to crack IIT JEE and AIEEE ... there is some information about these exams....
syllabus for iitjee and aieee
physics
chemistry
maths
after giving these tests a counsling will be done
these exam can given after 12th and also after 1 year ... you have 2 chances to give these tests only or first is just after 12th.
if u will score good in these tests so you will get addmission in good college of engg.

Is there any NRI quota for engineering and what is the fee payable for the course? Thereon, do nri student have to appear the entrance test or are they eligible to get admission after completing 1st year of A levels under IGCSE COURSE? Pls advise

The eligibility criteria to get admission to engineering field is given below-

For private sectors you need only 12th passed qualification

For government colleges you need to appear for entrance exams conducted by state governments of different states.

To get admission to IIT AND NIT colleges you need to give IIT-JEE entrance exam.

On the basis of this exam, the merit list are prepared and admission is given on the basis of your merit rank.

All the best

Dear Aspirant,

Here I will tell you the major Point for get admission in engineering in India are as uder below:

First of all you have to pass out 12th class with Science-Maths with recognized board and then you have to give IIT-JEE paper for Admission in IIT. Otherwise if you want to admission in state Engineering College, then you have to give that exam like rajasthan conducted the RPET (Rajasthan Pre Engineering Test) after that merit wise you can get the admission in engineering..

Hope that Information valuable for you.

i am indian national and will be passing my 12th class from USA school. Am I be eligible to admission to engineering college in INDIA? I had also passed my 10 th class from USA.

I am Indian national and will be passing 12th class from USA, am I eligible to admission in engineering in India? I had also passed my 10th class from school in USA.

Eligibility to gain engineering college in south India.68 percent in (comp.sci)science scheme.I eligible for study engineering (comp.sci)?

If the student passes 12 with commerce so is there any chance

If the student passes 12 from commerce side so is there any opportunity to attend engineering

To get admission in engineering first you need to complete the 12th with PCM subjects from recognised university. No percentage of marks required just pass in intermediate.