#1  
14th September 2010, 01:47 AM
anil750
Junior Member
 
Join Date: Sep 2010
Posts: 1

How to prepare for BHEL supervisor trainee exam (mechanical)?


How to prepare for bhel supervisor trainee exam. (mechanical).
What are important topics in mechanical engg.

Anil srivastava




  #2  
14th September 2010, 11:50 AM
chaitu667
Senior Member
 
Join Date: Sep 2010
Location: Sattupally
Posts: 176
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

Hello friend!


BHEL announced 550 vacancies for supervisor trainee for 2010-11 and they will pay a scale of 12.5k to 26k. Minimum of 65% marks are required in B.Tech graduation.

You need to cover up the 1st and 2nd year mech subjects and BHEL never prescribed any syllabus but you can follow the syllabus of GATE. There are two sections in BHEL, one is aptitude and the other one is technical test. Total of 240 marks from 240 objective type questions, that means each question carries 1 mark and 1 wrong answer earns you 0.2 negative mark.

Cover the syllabus that has to cover up for the GATE. This weblink will help you and this book is most prominent for Mech students in BHEL exam:
"http://www.flipkart.com/guide-bhel-m...ook-8183552463"

Good luck!
  #3  
14th September 2010, 08:55 PM
asahu47
Senior Member+++
 
Join Date: Aug 2010
Location: bhubaneswar
Posts: 1,860
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

hii
u can get the previous year question from ur book stoire and also on net..

u have to consentrate on ur fundamentalss.
like mechanice .thermoidynamics,
flude mechanice and hydrolic machines.


try hard to get ur fundamentals right

goiod luck,..
  #4  
17th September 2010, 12:52 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

how to prepare supervisor traniee in ece?
Reply With Quote
  #5  
18th September 2010, 12:51 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

syllabus for trainee mech department
Reply With Quote
  #6  
21st September 2010, 02:18 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

DEAR SIR /MADAM ,
I AM DIPLOMA MECHANICAL ENGG. I WANT TO APPEAR IN THE EXAM CONDUCTED BY BHEL FOR THE RECRUITMENT OF SUPERVISIOR
TRAINEE. KINDLY INFORM ME THE SYLLABUS FOR THIS EXAM ND IF POSSIBLE KINDLY SENT ME SOME SAMPLE PAPERS OF PREVIOUS YEAR.
I WILL BE ALWAYS GREATFUL TO YOU .
WITH THANKS,NRIPENDRA NARAYAN BORUAH
DERGAON TOWN-8. (e [email protected])
Reply With Quote
  #7  
21st September 2010, 04:55 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

i am a tool & die maker all question will be asked from my stream or mechanical
Reply With Quote
  #8  
5th October 2010, 02:14 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

sir i want syllabus of mechanical supervisor trainee and sample paper
([email protected])
Reply With Quote
  #9  
11th October 2010, 10:49 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

DEAR SIR /MADAM ,
I AM DIPLOMA MECHANICAL ENGG. I WANT TO APPEAR IN THE EXAM CONDUCTED BY BHEL FOR THE RECRUITMENT OF SUPERVISIOR
TRAINEE. KINDLY INFORM ME THE SYLLABUS FOR THIS EXAM ND IF POSSIBLE KINDLY SENT ME SOME SAMPLE PAPERS OF PREVIOUS YEAR.
[email protected]
Reply With Quote
  #10  
12th October 2010, 01:02 AM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

Dear sir/madam
i want syllabus of mechanical supervisor trainee and sample paper or previous question paper,
my e-mail id is ([email protected])
thank you
Reply With Quote
  #11  
12th October 2010, 03:05 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

Dear sir
i want syllabus of mechanical supervisor trainee and sample paper or previous question paper,
my e-mail id is ([email protected])
thank you
Reply With Quote
  #12  
17th October 2010, 12:33 AM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

sir,
i have to appear in bhel examination 2010,but i have not any idea for exam give me some idea.
[email protected]
Reply With Quote
  #13  
2nd November 2010, 11:22 AM
JAMESS
Senior Member+++++
 
Join Date: Sep 2010
Location: india
Posts: 2,554
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

first to know all the details about BHEL supervisor trainee first visit their website www.careers.bhel.in

in the written examination of BHEL question come from the basic part of your mechnical engineering stream. to clear this examination you should have a good knowledge on your subject. you can not crack this examination if you study only few portion of your syllabus.

to crack this examination be strong in aptitude part. because aptitude question comes in the examination and this part is more easy than the technical part. so if you can secure a good marks in aptitude then it will be more easy to clear the examination. after written examination you have to give interview.

i giving the general information which is given in the website for all branch.
About the Written Test
1. Written test will consists of 150 multiple choice objective type questions.Test is designed to assess the candidate's Professional ( Technical) Knowledge of the chosen Engineering Discipline and Higher Aptitude covering arear like Quantitative Aptitude, Reasoning Ability, Logical thinking, English usage, General Awareness etc.
1. Your performance in this written test will determine possibility of further considerations of your candidature.
3. There is a specific time limit for answering each part. Candidate will have to answer 150 questions in 2 hours .
4. For each question, a choice of few alternative answers will be given, out of which only one alternative is correct. You have to choose the alternative, you think to be correct and indicate your choice on the answer sheet.
5. Your admission to this Test is, however, provisional. The candidates are advised to ensure while applying that they fulfill the eligibility criteria and other requirements and that the particulars furnished by them are correct in all respects for the post applied for. Mere appearance at the Test does not entail you to make any claim for the post. You will be treated as debarred ab-initio in case you do not fulfill the essential eligibility criteria.
6. The Answer Sheet is a special OMR (Optical Mark Reader) sheet.
7. Every question will carry 1 mark. Negative marking to the extent of 0.2 marks per wrong answer will be there.
8. a) For answering the Test questions, there will be CIRCLES in the Answer Sheet. The chosen answer is to be indicated by darkening (encoding) one of the CIRCLE fully. Any other method of answering will be taken as incorrect answer.
For Example, If 10x+6=106, then 15X -10 will be
. (1) 100 (2)140 (3)110 (4)80 (5) None of the above

Since correct answer is option (2), the CIRCLE 2 will have to be darkened (encoded) to fill the space completely like this:

The following are not correct methods of marking:

d) Change / Cutting / Overwriting / Erasing of CIRCLES is NOT permitted.
c) Make marks only in the CIRCLES provided. Please do not make any stray marks on the answer sheet. This will be penalised.
d) Rough work must not be done on the Answer sheet. This will be penalised. You can use the Test Booklet for this purpose.

SAMPLE TEST QUESTION
1. APTITUDE TEST
Directions: In the following question, pick the choice whose meaning is opposite to the word shown in capitals.
1. HOI POLLOI:
(1) Cannibalism (2) Tyranny (3) The past (4) Aristocracy (5) Capitalist
2. Which of the following numbers is least?
(1) (1/4)2 (2) 49 (3) 4-9 (4) 42
3. It costs Rs.4.25 for two adults and their child to attend the Circus. If the child's ticket is half the price of adult's ticket, what is the price of an adult's ticket?
(1) Rs.0.75 (2)Rs. 1.70 (3) Rs.1.75 (4) Rs.1.44
4. If `a' is less than 50 and 'b' is less than 25, it follows that:
(1) a=2b (2) `a` is greater than b (3) a+b is less than 75 (4) a-b =25 (5) None of these

2. TECHNICAL TEST (for Supervisor Trainees)
CIVIL ENGINEERING
1. When a rectangular beam is loaded transversely, the maximum tensile stress is developed on the
(1) top layer
(2) bottom layer
(3) neutral axis
(4) every cross section
(5) none of these
2. The velocity at which the laminar flow stops, is known as
(1) velocity of approach
(2) lower critical velocity
(3) higher critical velocity
(4) medium critical velocity
(5) none of these
ELECTRICAL ENGINEERING
1. ) If a hot resistance of an indicator lamp is 50 Ohm and rated current is 0.2A, its rated voltage is
(1) 2V (2) 5V (3) 10V (4) 20V (5) 25V
2. What resistance must be connected in parallel with one of 8.5 ohm to give an equivalent resistance of 5.1 ohm?
(1) 15.72 ohm (2) 12.75 ohm (3) 17.52 ohm (4) 15.27 ohm (5) None of these
ELECTRONICS ENGINEERING
1. A reflex Klystron function as:
(1) Microwave amplifier (2) Microwave oscillator (3) A high gain cavity (4) both as amplifier and as oscillator (5) None of these
2. Thermocouple instruments are also known as
(1) R F instruments (2) PMMC instruments (3) Rectifier instruments (4) Digital instruments (5) None of these
MECHANICAL ENGINEERING
1. Kelvin-Planck’s law deals with
(1) conservation of work (2) conservation of heat (3) conversion of heat into work (4) conversion of work into heat (5) none of these
2. ) In involute gears, the pressure angle
(1) dependent on the size of teeth (2) dependent on the size of gears (3) always constant (4) always variable (5) none of these

ANSWER KEY
1. APTITUDE TEST
1(4) 2.(3) 3.(2) 4.(3)
2. TECHNICAL TEST
1. CIVIL ENGG. 1. (1) 2. (2)
2. ELECTRICAL ENGG. 1. (3) 2. (2)
3. ELECTRONICS ENGG. 1. (2) 2. (3)
4. MECHANICAL ENGG. 1. (3) 2. (3)
The tests have been designed to determine whether you have a sound knowledge of your subject. You are, therefore, advised to revise all the sections of your course syllabus in order to prepare adequately for the test.
Reply With Quote
  #14  
2nd November 2010, 08:44 PM
coolare
Junior Member
 
Join Date: Nov 2010
Location: NEW DELHI
Posts: 5
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

just cover the syllabus as in for the GATE exam and put special stress on topics such as turbines, boilers etc.. do learn the direct apply and solve formulae as many numericals are directly fomulae based so u can save on tym...
Reply With Quote
  #15  
24th February 2011, 12:48 AM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

sir now i am doing diploma in tool and die making course can i give the examination for bhel .
Reply With Quote
  #16  
18th May 2011, 08:25 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

hi i had completed iti tool and die maker and apprenticeship in MYSORE ELECTRICAL INDUSTRIES and present working in BOSCH

FOR ITI TOOL AND DIE MAKER THERE IS ANY VACANCIES IN BHEL
PLEASE TELL ME
[email protected]
Reply With Quote
  #17  
10th August 2011, 11:02 AM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

i want the syallbus of bhel for supervisor trainnee 2011
Reply With Quote
  #18  
11th August 2011, 09:05 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

which preparation books for supervisor mechanical?
Reply With Quote
  #19  
12th August 2011, 02:54 PM
solution
Senior Member++++
 
Join Date: Jul 2010
Posts: 3,164
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

Hello dear

syllabus for BHEL supervisor trainee exam (mechanical) is given below

Mechanical Engineering Subject
Automation, CNC Machines and Robotics
Combustion Engineering
Computer Aided Design
Computer Graphics & Solid Modelling
Computer Integrated Manufacturing
Dynamic of Machines - Force Analysis Turning Moment & Fly Wheel, Balancing of Machines, Friction, Brakes and Dynamometers, Governors, Gyroscopic Motion, Mechanical Vibration
Engineering Materials
Engineering Mechanics
Engineering Thermodynamics
Fluid Mechanics
Heat Transfer
Hydraulic Machines - Impact of Jet, Hydraulic Turbine, Centrifugal Pump, Reciprocating Pump, Hydraulic Systems
I.C.Engines
Kinematics of Machines - Velocity and Acceleration in Mechanism, Mechanism with Lower Pairs, Kinematic Synthesis of Plane Linkages, Cams, Gears,
Machine Design
Materials Science and Technology
Mechatronics and Modern Control
Metrology and Inspection
Production Engineering
Reciprocating Air Compressors
Refrigeration and Air Conditioning
Steam Power Engineering - Vapour power cycle, Flow through nozzles and diffusers, Steam turbines, Condensers and Cooling Towers, Steam generator
Strength of Materials
Stress Analysis and Design
Structural Analysis and Design
Theory of Machines

General Engineering
Electrical Engineering - AC Basics, DC Basics, Basic Magnetism, Digital Circuits, Semi Conductors
Civil Engineering - Concrete and Construction Technology, Building Materials, Soil Mechanics.

so.you must follow the syllabus.

all the best................
Reply With Quote
  #20  
15th August 2011, 11:37 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

i just want to know the possible questions will be appeard in bhel entry test
Reply With Quote
  #21  
16th August 2011, 04:59 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

Dear Sir/Madam,
I passed Diploma in mechanical Engineering from Board of technical education With 69%.I have two year experience in Projects in Gannon Dunkerley & Co.LTD.so sir any other option for BHEL join.any interview and other exam.Please suggested me because i don't want to spoil my experance.
please suggest my id. [email protected] .
thanking you
Reply With Quote
  #22  
20th August 2011, 09:07 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

Dear Sir/Madam,
can you give paper pattern for bhel superviser trainee mechanical.Also some of the sample question paper for the same.

Regards,
Atul ([email protected])
Reply With Quote
  #23  
4th September 2011, 11:02 AM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

HOW TO PREPARE FOR BHEL SUPERVISOR TRAINEE NON TECHNICAL SECTION. IS IT MANDATORY TO PASS EACH SECTION SEPARATELY?
KM NEHA SHARMA
Reply With Quote
  #24  
9th September 2011, 06:13 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

can any one tell me how to prepare for BHEL supervisor trainee exam in short time
Reply With Quote
  #25  
9th January 2012, 01:16 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

What's maximum mark for interview of bhel superviser trainee?
Reply With Quote
  #26  
25th February 2012, 12:22 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

sir am sathish how to prepare bhel supervisior trainee for mechanical engineering my maid is [email protected]
Reply With Quote
  #27  
21st August 2014, 10:56 PM
Unregistered
Guest
 
Posts: n/a
Default Re: How to prepare for BHEL supervisor trainee exam (mechanical)?

sir I m be mech 3red year student I m eligible for this [email protected]
Reply With Quote
Do you have any question? or have anything to say?



Related Topics:

Thread Replies Last Post
BHEL Supervisor trainee, in mechanical major writtern exam previous question papers 64 22nd February 2020 12:59 PM
BHEL Supervisor Trainee mechanical major, old Question papers 140 17th July 2012 06:32 PM



Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0
Please also check: