Education and Career Forum

The next date of BSNL TTA exam?what is the syllabus of TTA?

these are the syllabus for this.

just visit this attachment
and
all the best ,

hello,

NEXT DATE OF EXAM:

This year exam were done so you have wait for next year..Bharat Sanchar Nigam Limited (BSNL), Telecom Technical Assistants (TTAs) exam will held next year.


SYLLABUS:
Syllabus of BSNL TTA exams:
BSNL TTA exam syllabus is as follows:

Paper I: General ability test - 100 marks
The candidate’s comprehension and understanding of General Engineer shall be tested through simple exercises such as provision of antonyms and synonyms, fill in the blanks and multiple choice exercises etc. This shall also include questions on current events, general knowledge and such matters of everyday observation and experience as may be expected of an educated person.

Paper II: Basic Engineering - 500 marks
1. Applied Mathematics : Co-ordinate Geometry, Vector Algebra, Matric and Determinant: Differential Calculus; Differential equation of second order’ Fourier series; Laplace Transform; Complex Number; Partial Differentiation.

2. Applied Physics : Measurement – Units and Dimensions; Waves, Acoustics, Ultrasonics; Light; Laser and its Applications; Atomic Structure and Energy levels.

3. Basic Electricity : Electrostatics, Coulomb’s law, Electric field, Gauss’s Theorem, concept of potential difference, concept of capacitance and capacitors; Ohm’s law, power and energy, Kirchoff’s voltage, current laws and their applications in simple DE circuits; Basic Magnetism; Electro Magnetism; Electromagnetic induction; Concept of alternating voltage & current; Cells and Batteries; Voltage land Current Sources; Thevenin’s theorm, Norton’s theorm and their applications.

4. Eletronics Devices and Circuits : Classification of materials into conductor, semi conductor, insulator etc., electrical properties, magnetic materials, various type of relays, switches and connectors, Conventional representation of electric and electronic circuit elements. Active and assive components; semi conductor Physics; Semiconductor Diode; Bipolar Transistor & their circuits; Transistor Biasing & Stabilisation of operating point; single stage transistor amplifier; field effect transistor, Mosfet circuit applications.

Multistage Transistor Amplifier; Transistor Audio Power Amplifier; Feedback in Amplifier, Sinusoidal Oscillator;s; Tuned Voltage Amplifiers; Opto Electronics Devices and their applications; Operational Amplifier; Wave shaping and switching circuits.
Block diagram of I.C timer (Such as 555) and its works; Multi vibrator Circuits; Tiem base Circuits; Thyristors and UJJ; Regulated Power Supply.

5. Digital Techniques : Applications and advantages of digital systems; number system (binary and hexadecimal); Logic Gates; Logic Simplication; codes and parity; Arithmetic Circuits; Decoders, Display Devices and Associated Circuits; Multiplexers and De-multiplexers; Latches and Flip Flops; Counters; Shift Register; Memories; A/D and D/A converters.

Paper III: Specialization – 500 marks
Candidate shall be allowed to choose any two out of the following sections. Each section shall consist of 250 marks. In the event of a candidate attempting more than 2 sections, the first two sections attempted in alphabetical order shall only count. Candidates are in their own interest advised not to attempt more than 2 sections.

Section A : Electrical
Section B : Communication
Section C : Networks, Filters and Transmission Lines
Section D : Instruments and Measurements
Section E : Control Systems
Section F : Microprocessors
Section G : Computers
Detailed syllabus for each section is as under :-

Section A : Electrical :
3 phase vs single phase supply, Star Delta connections, relation between phase & line voltage, power factor and their measurements; construction and principles of works of various types of electrical measuring instruments, all types of motor and generator AC & DC, transformers, starters, rectifiers, inverters, battery charges, batteries, servo and stepper motors, contractor control circuits, switchgear, relays, protection devices & circuits, phase controlled rectifiers, inverters, choppers, dual converters, cycloconverters; power electronics application in control of drivers, refrigeration & airconditioning.

Section B : Communication :
Modulation and demodulation – principles and operation of various types of AM, FM and PM modulators / demodulators; pulse modulation – TDM, PAM, PPM, PWM; Multiplexing, Principles and applications of PCM.
Introduction of Basic block diagram of digital and data communication systems; Coding error detection and correction techniques; digital Modulation Techniques – ASK, ICW, FSK, PSK; Characteristics / working of data transmission circuits; UART, USART; Modems; Protocols and their functions, brief idea of ISDN interfaces, local area Network; Carrier Telephony – Features of carrier telephone system.
Microwave Engineering : Microwave Devices; Waveguides; Microwave Components; Microwave antennas; Microwave Communication Systems-Block diagram & working principles of microwave communication link.

Section C : Network, Filters and Transmission Lines :
Two port network; Attenuators; Filters; Transmission Lines and their applications; characteristic impedance of Line; concept of reflection and standing waves on and transmission line; Transmission Line equation; Principle of impedance matching; Bandwidth consideration of a transmission line.

Section D : Instruments and Measurements :
Specifications of instruments – accuracy, precision, sensitivity, resolution range, Errors in measurement and loading effect, Principles of voltage, current and resistance measurements, Transducers, measurement of displacement & strain, force & torque measuring devices, pressure measuring devices, flow measuring devices, power control devices & circuits. Types of AC milli-voltmeters – Amplifier rectifier and rectifier amplifier; Block diagram explation of basic CRO and a triggered sweep oscilloscope, front panel controls; Impedance Bridges and Q-Meters; Principles of working and specifications of logic probes, signature analyzer and logic analyzer, signal generator, distortion factor meter, spectrum analyzer.

Section E : Control Systems :
Basic elements of control system, open and closed loop system, concepts of feedback, Block diagram of control system. Time lag, hysterisis, linearity concepts; Self regulating and non self regulating control systems. Transfer function of simple control components, single feedback configuration.

Time response of systems.
Stability Analysis – Characteristic equation, Routh’s table, Nyquist criterion, relative stability, phase margin and gain margin.

Routh Hurwitz criterion, root locus technique, Bode plot, Polar-plot, Gain margin and phase margin.

Sectopm F : Microprocessors :
Typical organization of a microcomputer system & functions of its various blocks; architecture of a Microprocessor; Memories and I/O Interfacing; Brief idea of M/C & assembly languages, Machines & Mnemonic codes; Instruction format and Addressing mode; concept of Instruction set; programming exercise in assembly language; concept of interrupt; Date transfer techniques – sync data transfer, async data transfer, interrupt driven data transfer, DMA, serial output data, serial input data.

Section G : Computers :
Computer and its working, types of computes, familarisation with DOS and Windows – concept of file, directory, folder, Number Systems, data representation; Programming – Elements of a high level programming language, PASCAL, C; | Use of basic data structures; Fundamentals of computer architecture, Processor design, Control unit design; Memory organization. I/o system Organization. Microprocessors – micro processor architecture, instruction set and simple assembly level programming. Microprocessor based system design : typical examples. Personal computers and their typical uses, data communiation principles, types and working principles of modems, Network principles, OSI model, functions of data link layer and network layer, networking components; communication protocols – X.25.TCP/IP.
Database Management System – basic concepts, entity relationship model, relational model, DBMS based on relational model.


MICROPROCESSOR PAPER:
iam sending the microprocessor paper tta paper...

1. A 32-bit processor has
(a) 32 registers
(b) 32 I/O devices
(c) 32 Mb of RAM
(d) a 32-bit bus or 32-bit registers
2. Clock speed is measured in
(a) bits per second
(b) Hertz
(c) bytes
(d) baud
3. A 20-bit address bus allows access to a memory of
capacity
(a) 1 MB
(b) 2 MB
(c) 4 MB
(d) 8 MB
4. A microprocessor contains
(a) most of RAM
(b) most of ROM
(c) peripheral drivers
(d) most of the control and arithmetic logic functions of
computer
5. Which of the following is NOT a type of processor?
(a) PowerPC
(b) Motorola 8086
(c) Motorola 68000
(d) Intel Pentium
6. If interrupt arrives on the three lines INTR, RTS 6.5
and RTS 7.5, which of them will the 8085 processor
acknowledge?
(a) INTR
(b) RTS 6.5
(c) RTS 7.5
7. The Intel 8086 processor is
(a) 8-bit
(b) 16-bit
(c) 32-bit
(d) 64-bit
8. An assembly language instruction
(a) always has a label
(b) always takes at least one operand
(c) always has an operation field
(d) always modifies the status register
9. An interrupt instruction
(a) causes an unconditional transfer of control
(b) causes a conditional transfer of control
(c) modifies the status register
(d) is an I/O instruction
10. Programs are written in assembly language because they
(a) run faster than High-level language
(b) are portable
(c) easier to write than machine code programs
(d) they allow the programmer access to registers or
instructions that are not usually provided by a High-level
language
11. Given that the subprogram putc displays the character
in al, the effect of the following instruction is -
mov al, ‘c’
sub al, 2
call putc
(a) display 2
(b) display ‘c’
(c) display ‘a’
(d) display a blank
12. The result of mov al, 65 is to store
(a) store 0100 0010 in al
(b) store 42H in al
(c) store 40H in al
(d) store 0100 0001 in al
13. Microprocessor is also often called a
(a) Chip
(b) Resistor
(c) Capacitor
(d) Transistor
14. A microprocessor’s program counter has
(a) the digital value of the data
(b) the address of an instruction
(c) the address of data
15. Which of the following is a math co-processor?
(a) 8085
(b) 8086
(c) 8087
(d) 8088
16. Interrupts are classified as
(a) Hardware interrupts
(b) Software interrupts
(c) Hardware interrupts and Software interrupts
(d) none of the above
17. The system bus is made up of
(a) data bus
(b) data bus and address bus
(c) data bus and control bus
(d) data bus, control bus and address bus
18. The memory address register is used to store -
(a) data to be transferred to memory
(b) data that has been transferred from memory
(c) the address of a memory location
(d) an instruction that has been transferred from memory
19. When an interrupt occurs, the processor completes the
current ___________ before jumping to the interrupt service
subroutine
(a) microinstruction it is executing
(b) instruction it is executing
(c) macro it is executing
(d) subroutine it is executing
20. A microprocessor is a processor with a reduced
(a) instruction set
(b) power requirement
(c) MIPS performance
(d) none of the above
21. A scheme in which the address specifies which memory
word contains the address of the operand, is called
(a) Immediate addressing
(b) Based addressing
(c) Direct addressing
(d) Indirect addressing
22. Processor gets the address of the next instruction to
be processed from
(a) Instruction register
(b) Instruction counter
(c) Program counter
(d) Program register
23. Fetch operations are not required in
(a) Immediate addressing
(b) Register addressing
(c) Direct addressing
(d) Indirect addressing
24. What is meant by Maskable interrupts?
(a) An interrupt that can be turned off by the programmer.
(b) An interrupt that cannot be turned off by the
programmer.
(c) An interrupt that can be turned off by the system.
(d) An interrupt that cannot be turned off by the system.
25. Which interrupts are generally used for critical events
such as Power failure, Emergency, Shut off etc.?
(a) Maskable interrupts
(b) Non-Maskable interrupts
(c) none of the above
26. Which microprocessor accepts the program written for
8086 without any changes?
(a) 8085
(b) 8087
(c) 8088
27. How many memory locations are required to store the
instruction LXI H, 0800H in an 8085 assembly language
program?
(a) 1
(b) 2
(c) 3
(d) 4
28. How many memory fetches (including instruction fetch)
are required to execute the instruction LXI H, 0800H in an
8085 assembly language program?
(a) 1
(b) 2
(c) 3
(d) 4
29. MPU stands for
(a) Multi-Processing Unit
(b) Micro-Processing Unit
(c) Mega-Processing Unit
(d) Major-Processing Unit
30. Which of the following is not possible by a
microprocessor?
(a) Reading from Memory
(b) Writing into Memory
(c) Reading from Input port
(d) Writing into Input port
31. In which microprocessor does the concept of pipeline
first introduced?
(a) 8086
(b) 80286
(c) 80386
(d) 80486
32. LSI stands for -
(a) Large Size Instruction
(b) Large Scale Instruction
(c) Large Size Integration
(d) Large Scale Integration
33. Which of the following is true about pseudo code?
(a) A machine language
(b) An assembly language
(c) A high level language
(d) none of the above
34. The macro processor must perform
(a) recognize macro definitions and macro calls
(b) save the macro definitions
(c) expand macro calls and substitutes arguments
(d) all of the above
35. A 32 bit microprocessor has the word length equal to
(a) 1 byte
(b) 2 byte
(c) 4 byte
(d) 8 byte
36. The TRAP interrupts mechanism of the 8085 microprocessor
(a) execute an instruction supplied by an external device
through the INTA signal
(b) execute an instruction from memory location 20H
(c) executes a NOP
(d) none of the above
37. What are the states of the Auxiliary carry (AC) and
Carry flag (CY) after executing the following 8085 program?
MVI H, 5DH
MVI L, 6BH
MOV A, H
ADD L
(a) AC=0 and CY=0
(b) AC=1 and CY=1
(c) AC=1 and CY=0
(d) AC=0 and CY=1
38. Contents of register A after the execution of the
following 8085 microprocessor program is
MVI A, 55H
MVI C, 25H
ADD C
DAA
(a) 7AH
(b) 80H
(c) 50H
(d) 22H
39. Which of the following is a 16-bit micro processor?
(a) Motorola 6800
(b) Intel 8085
(c) Intel 8086
(d) Zilo 80
40. The Intel Pentium Pro microprocessor uses 36 address
lines to access memory. What is the maximum memory that it
can support, in gigabytes?
(a) 16
(b) 32
(c) 64
(d) 128
41. Out of the following which is not the flag in 8085
microprocessor
(a) Counter flag
(b) Carry flag
(c) Zero flag
(d) Parity flag
42. What is a basic element of Memory?
(a) Transistor
(b) Flip-flop
(c) Gate
(d) none of the above
43. Which group of instructions do not affect the flags?
(a) Arithmetic operations
(b) Logic operations
(c) Data transfer operations
(d) Branch operations
44. DMA stands for
(a) Direct Memory Allocation
(b) Distinct Memory Allocation
(c) Direct Memory Access
(d) Distinct Memory Access
45. In RST interrupts, RST stands for
(a) Repeat Start Test
(b) Restart
(c) Start
46. Which interrupt has the highest priority?
(a) TRAP
(b) RST 6
(c) RST 6.5
(d) INTR
47. In 8085 microprocessor with memory mapped I/O
(a) I/O device have 8-bit addresses.
(b) I/O devices are accessed using IN and OUT instructions.
(c) arithmetic and logic operations can be directly
performed with the I/O data.
(d) there can be a max of 256 input devices and 256 output
devices.
48. A microprocessor -
(a) reads instructions from memory
(b) communicates with I/O devices
(c) controls the timing of information flow
(d) all of the above
49. An instruction consists of
(a) Data and Address
(b) Register and Memory
(c) Opcode and Operand
(d) Input and Output
50. If the 8085 adds 87H and 79 H, which of the following
flags will become 1
(a) Zero flag and Auxiliary Carry flag
(b) Zero flag and Carry flag
(c) Carry flag and Auxiliary Carry flag
(d) none of the above


So kindly find your answer within the text. for more information you can mail me on [email protected] theko shreya.

Dear friend,
As you want to know about the Next date of BSNL TTA exam,
Then there is no any need of worry.
You can get it from the following websites,
www.winentranceexam.com
So just go and find the details on the given websites.

Hi

This year the exam for TTA has been done so you have to wait for the next year. You can prepare yourself for the next session as you have got an opportunity to clear this exam and you have a time of one year so prepare your self for the exam.

The syllabus for this exam have been attached so you can check it from there.

GOOD LUCK

HI!

Sorry BSNL TTA exam, 2010 has already been conducted so you have to wait till the next recruitment notification comes out.

For all recruitment related notifications for TTA including adveritsement for vacancies and selection result, visit the website of respective telecom cirle.

BSNL Rajasthan Telecom Circle
http://www.rajasthan.bsnl.co.in/

Maharashtra Telecom Circle
http://www.maharashtra.bsnl.co.in/

Tamil Nadu Telecom Circle
http://tamilnadu.bsnl.co.in/

BSNL Chennai
http://www.chennai.bsnl.co.in/

BSNL Haryana
http://www.haryana.bsnl.co.in/

BSNL UP East
http://www.upw.bsnl.co.in/

BSNL UP West
http://www.upe.bsnl.co.in/

final year student also eligeble for jto exam sir,where i got the appligation sir

dear friend,
the next date of BSNL TTA exam will be published state wise
so for details u may take help from following sites:

1>http://www.rajasthan.bsnl.co.in/
2>http://www.chennai.bsnl.co.in/
3>http://www.upe.bsnl.co.in/
the syllabus of the exam is in .pdf file
Best of luck

dear friend
ohhhh sorry friend, the exam has been already finished.
so,you have to wait for next year.
so,keep hardworking and get success.
best wishess for you

the exam for the year 2010 is already over.

so you can not apply for this year.

you have to wait till the next recruitment notification comes out.

hi.....frnd........
anything u want about bsnl just goto the site www.bsnlindia.com
bst of luck.....

hello friend


Bharat Sanchar Nigam Limited is the 7th biggest telecom company in the world with its variety of services like mobile service, broadband, internet etc. Today, Bharat Sanchar Nigam Limited has 47.3 million line basic telephone capacity, 4 million WLL capacity, 20.1 Million GSM Capacity, 7330 cities/towns and 5.5 lakh villages. The company has invited the application for TTA 2010 Entrance Examination.
Eligibility Criteria
The candidate is age limit between 18 and 27 years on the closing date of receipt of applications.
Other Qualification
The condidate should have passed following degree form any reconized university
Electrical Engineering
Radio Engineering
Computer Engineering
Information Technology
Instruments Technology
Telecommunication Engineering
MSc (electronics)
Electronics Engineering

Selection Process
The Entrance Examination is divided into 3 parts.
The Entrance Examination will be for 200 Marks.
Basic Engineering (90 questions)
Specialization (90 questions)
General Ability Test (20 questions)
Exam Pattern
Visit the official Website for more detail about the Exam Pattern of Bharat Sanchar Nigam Limited Entrance Examination (BSNL) TTAs Entrance Examination.
Results
Result of Bharat Sanchar Nigam Limited Entrance Examination (BSNL) TTAs Entrance Examination for academic year 2010 will be update here on the Time when The Result will be declared on official website.
Important dates
Important dates for Bharat Sanchar Nigam Limited Entrance Examination (BSNL) TTAs Entrance Examination will be update on official website soon .

FOR YEAR 2011 IT IS NOT ANNOUNCED



How to Apply
The Condidate Entrance Examination application format given in the advertisement must be printed on an A4 sheet and the complete application with an attested photograph pasted on it must be sent along with the draft to AGM (Estt) O/o the Chief General Manager Telecom, Bihar Telecom Circle, Sanchar Sadan, Budhh Marg, Patna- 800001.
Application forms
The Condidate Entrance Examination demand draft of Rs 500 to be made in the favour of A.O. (B & A), BSNL C.G.M.T Patna There is no fee for SC/ST/PH.
Address
Bharat Sanchar Nigam Limited
C.G.M.T Patna, India

SIR When will be next bsnl tta exam date

kindly inform me, the tta Exam 2010 for west bengal have conducted or not.
can I apply for the exam outside WB circle

pease sir tell me next paper of tta exam 2010 in haryana

examination date of tta exam date

dear friend


the next date of BSNL TTA yet not published ,this publish according to state

so for details u may take help from following sites:

1>http://www.rajasthan.bsnl.co.in/
2>http://www.chennai.bsnl.co.in/


i give you the syllabus by attachment file.........

have a good day

what is the qualification requred for tta exam

please tell me about tta exam 2010

when will be the tta exam in andhra pradesh for the year 2010, please reply

please tell me about tta exam 2010 in andhra pradesh

hello sir please send me details for tta exam syllabus jan 2011 karnataka region and reference book and related source our id [email protected]

hello sir please send me details for tta exam syllabus Feb-2011 Andhra Pradesh.

T.VASUNDER
Sr.TOA,
Hyderabad
[email protected]

when will be exam of tta jharkhand zone

kindly infom me, date of bsnl tta exam 2010 west bengal circle

when will be exam of tta jharkhand zone

what is the exam date of tta 2010 bsnl west bengal circle

The next date (2011) of BSNL TTA exam?what is the syllabus of TTA?

next date of TTA exam 2011.

kindly infom me, date of bsnl tta /jto exam 2011 tamilnadu circle

jto notification 2010

Important tentative dates
Last Date: Second Week of July 2011
Number of Vacancies: 171 (General: 96, OBC: 46, SC: 27, ST: 2)
Qualification: 3 years Diploma in Telecom Engineering/ Electronics Engineering/ Electrical Engineering/ Radio Engineering / Computer Engineering / Instruments Technology/ Information Technology / M.Sc. (Electronics).
Age Limit (as on July 2011): 18 to 27 years. [Age Relaxation as per rules]
Application Fee: Prescribed application fees to be paid in the form of a DD favoring “The A.O. (B&A), BSNL, Office of the CGMT Patna”

Originally Posted by shreya sengupta

The next date of BSNL TTA exam?what is the syllabus of TTA?

well shreya,

BSNL EXAM that you are opting is very good i must say..

BSNL TTA EXAM is conducted by every states so these are the some sites which gonna help you...

www.upe.bsnl.co.in/

www.rajasthan.bsnl.co.in/

www.chennai.bsnl.co.in/

good luck...

tentative exam date of tta 2010 of jharkhand circle

date of bsnl tta exam is second week of july 2011 and more you can visit on
www.winentranceexam.com

u can get all the information from this link….. www.jobsnresults.com › Government Jobs

Originally Posted by shreya sengupta

The next date of BSNL TTA exam?what is the syllabus of TTA?

The TTA exam for this year has already done. Applicants have to wait for next year recruitment notification. BSNL will publish TTA recruitment notice for the next year in employment newspapers and also it its official website. In the mean time aspirants can prepare themselves for the exam.

tell me the date of written exam. of srd tta of jharkhand region

Next date of BSNL TTA exam in kerala 2011

in how many question attempting in part III question and how many question for computer and others ple info me

Next date of BSNL TTA Exam-2011 for gujarat

hii

Next date of BSNL TTA exam
Sorry BSNL TTA exam, 2010 has already been conducted so you have to wait till the next recruitment notification comes out.
For all recruitment related notifications for TTA including adveritsement for vcancies and selection result, visit the website of respective telecom cirle.
BSNL Rajasthan Telecom Circle
http://www.rajasthan.bsnl.co.in/
Maharashtra Telecom Circle
http://www.maharashtra.bsnl.co.in/
Tamil Nadu Telecom Circle
http://tamilnadu.bsnl.co.in/
BSNL Chennai
http://www.chennai.bsnl.co.in/
BSNL Haryana
http://www.haryana.bsnl.co.in/
BSNL UP East
http://www.upw.bsnl.co.in/
BSNL UP West
http://www.upe.bsnl.co.in/

good luck

Dear Sir,

Please tell me the next date for TTA exam conduct in Karnataka. Pls send me the syllabus details to my mail id. Plese sirrrrrrrrrrrr.

Regards,
Santhi,
[email protected]

dear sir
please inform me the next date for the bsnl tta exam for jharkhand circle.
please inform me at my mail address as given below
:[email protected]
thanks
raj

when is the date of bsnl jto exam notification-2011 will be given? please inform me .

hello sir, I was appeared in tta exam at 19 dec 2010 when the result will be declared ? please inform me on [email protected] iam so confused to choose new jobs due to the latency of this result.

Respected sir, myself Manjunath S R ........I wrote exam of BSNL TTA under sed 2010 which is held on 9th January for karnataka circle .....May I know when is the Result please? or please mail the date to my email id-> [email protected]

when the result will come-out TTA (SRD)-2010 MP?

i want to know theexam date of jharkhand bsnl in tta

Can any one provide me the details of TTA exam in j&k circle for 2011 session
kindly mail me at [email protected]

thanks