Education and Career Forum

I want to know what can i do after B.Tech (electrical) other than m-tech and MBA?

For example SAP and PLC courses, please give me information about my branch related courses, and their scope.....

There are many course in the programming side. If you are interested in this you could join institutes like NIIT and pursue a course. Also there are automation courses available. This will include PLC, Drives etc.

hi dear,
i sending you some info about your post go to below link

best luck

http://entrance-exam.net/forum/general-discussion/what-do-after-completing-b-tech-electrical-other-than-m-tech-mba-information-about-electrical-branch-related-courses-their-scope-62383.html

after B.tech in electrical engineering you may join in any company for job. because work experience will be considered as best when you will join in any other company.

but if you are unable to get job and you want to some courses before joining into job then you may go for it. SAP and PLC both are very good course you may do it from any good institution. also you may do some course on transformer. there are course available for transformer.

you may go for industrial training. this will be also very much helpful to get job in good company. also you will face advantage when you will do your work if you have training from that particular industry.

you may do some courses on power plant also. some power system design courses are also available in good institution. choose the best suitable one for you in which field later you want to do job.

best wishes.

1)After B.Tech in Electrical best course you can go for in

#Software side

*CCNA
*Dot Net
*SAP
*IBM Main Frame
*NIIT
*C,C++ and Java
*Hacking is new course

#Automation Side

*PLC

*SCADA

*DCS

*CADD

*Six Sigma

Best of luck

i am B. Com graduation in 2005. now i want to do MBA. but i have 5 yrs gap so wht i do?
& tell me its good for my careear

Hiii
After your BE you can do CDAC that is centre for development of advance computing a six month course. For this you have to appear for CDAC exam. CDAC is conducted twice in a year. there are only four centres in India which provide CDAC course. This is one of the best course you can do after your BE. As the course is so good that you get the placement just after you complete your course in reputed companies undoubtedly. I am saying all this with confidence because this is my personal experience. so go for CDAC.

good afternoon dear

you can join many MNC's as well as government sector like INFOSYS,WIPRO,DRDO would be best choices for you ,

there are 7 nuclear power plants as well as approx..181 thermal power plant they are only for electrical engg...

so it would be a good choices for you as your work experience will also increases your salary .......... so always choose the best suitable one for you in which field later you want to do job.

best wishes.

Dear, for your electrical guys there are several oppertunities.....

best civil services..

IOCL,PGDCL like Navaratna companies are giving good oppertunities....

but sure good score at gate to get job there...

Genco ,Transco also giving good oppertunities for your guys....

Dear friend,
After b.tech you can go for research,by doing a p.hd...
Apply for NET exem immidiately...

For having an expertise in Electrical engineering , one must need a real time exposer of the system, it's operation and control as everything happening in electrical engg is hypothetical in nature. so the best way is to join a gud company of the choice.

Secondly, exposer with a good control strategy is nacessory, and one can suceed only after having a good system exposer. so develop your own control strategy of the system for this you may need knowledge of some software toos for modeling and simulation.

Finaly, whenever you need to have and find suitable, an higher education just go for it provided it should be real time classroom basis.

you should join some traning or courses if you are interested in further studies...

or you may join in any company for job.. by this wortking experience in future you will be considered best

Originally Posted by pacific051288

I want to know what can i do after B.Tech (electrical) other than m-tech and MBA?

For example SAP and PLC courses, please give me information about my branch related courses, and their scope.....

well friend,

apart from MBA, MCA and M-TECH.

you can have access with career opportunity.
1.career in AIR FORCE, INDIAN ARMY or INDIAN NAVY

2.career in computers administration(MCA)

3.can go for small business

4.can opt for animations industry

5.modelling and fashion designing

good luck.

Originally Posted by amahajan

Hiii
After your BE you can do CDAC that is centre for development of advance computing a six month course. For this you have to appear for CDAC exam. CDAC is conducted twice in a year. there are only four centres in India which provide CDAC course. This is one of the best course you can do after your BE. As the course is so good that you get the placement just after you complete your course in reputed companies undoubtedly. I am saying all this with confidence because this is my personal experience. so go for CDAC.

thanks sir 4 ur advice.....

can send me some more detail of CDAC ....
i didnt get it completely, can u also send me a link related to CDAC.

thankssss

Originally Posted by dreksha chaudhary

good afternoon dear

you can join many MNC's as well as government sector like INFOSYS,WIPRO,DRDO would be best choices for you ,

there are 7 nuclear power plants as well as approx..181 thermal power plant they are only for electrical engg...

so it would be a good choices for you as your work experience will also increases your salary .......... so always choose the best suitable one for you in which field later you want to do job.

best wishes.

thanks 4 ur suggestion , but sorry to say INFOSIS is not a govt. sector enterprise....

Hi!
I think you are little bit confused about your career. You are not justify your goals for which you have studied electrical engineering.
Anyway as you have finished the engineering M.Tech or MBA is the good option for you but as you have said that you are not interested to these courses.
So it is better to apply for some jobs either in private sectors as well as government sectors.
There are many recuitments are released now a day so you can track it out from the Employment news or any educational sites.
Otherwise you can get some special training from any reputed institutions.
You can take training in power system, machine designing, raddar system etc..

So select from these options as i have given above as per your interest.
Best wishes...bye

can you please give me details of these courses------

*DCS

*CADD

*Six Sigma



[SIZE=1]---------- Post added at 11:16 PM ---------- Previous post was at 10:45 PM ----------[/SIZE]


can you please give me details of these courses------

*DCS

*CADD

*Six Sigma

Hi,
Friend
If you do not want to go for higher studies, then you can go for job. There are so many MNC's which provide handsome salary. For this, i would advice you to prepare a powerful resume. You can write PH test which is conducted by group of companies. through this PH test, you can get so many good companies.

Or as you belong to electrical engineering, I would advice you to go for SCADA which is one of the most and very advance technology in this today's world.

All the best.

hi ,
you can have many course


apart from MBA, MCA and M-TECH.

you can have access with career opportunity.
1.career in AIR FORCE, INDIAN ARMY or INDIAN NAVY

2.career in computers administration(MCA)

3.can go for small business

4.can opt for animations industry

5.modelling and fashion designing

good luck. rses

Hai,

There are number of paths you can take after completing you engineering in electrical, there are number of entrance exams going on to recruit the electrical engineers in government sector like BSNL JTO, DRDO, BHEL, electrical boards like APTRANCO and APGENCO, if you are from other state try check out with your state electrical boards.

or else as you said you can also try out some of your stuff in software industry, SAP as you said is also having tremendous demand now a days, if you want you can do the SAP course in ABAP or ABAP-HR... i.e technical modules for engineers .......

like this they are number of options a head of you.
All you have to do is don't loose hope and try your own best thats all ....

Best of luck...

Regards,
Suresh Vyas.

Originally Posted by saminafm

i am B. Com graduation in 2005. now i want to do MBA. but i have 5 yrs gap so wht i do?
& tell me its good for my careear

obviously higher study is always good for career. if you have not cross the age eligibility then it is good to do MBA now. 5years gap is not any problem.


i think in this five years you have done some job also. so you have some work experience. it will help you a lot to get job after completion of MBA. if you have not done anything in this five years then you will face some difficulties. but i think you don't have this problem.

don't worry go for MBA. after MBA scope and job opportunity both will be increased.

best wishes.

hello friend

you see, if you are interested to work with your electrical engg field then you must do mtech.

specially if you want to do research oriented jobs, then MTech is compulsory.

you can do mtech in given below field

1.power electronics.

2.VLSI.

3.Nano technology.

etc.

but if you are not interested to work in your engineering field, then it is essential to do MBA.

but one things you should remember, for getting promotion in company, MBA is essentially required.

best of luck........

Hi,I am persuing B.Tech in electronics and communication.I am in 8th sem now.I would like to know about the courses that i can choose after my B.Tech completion.And is there any other course except M.Tech n MBA?

i am intrested in it feild and i was thinking to do c dac.. I am working for crompton greaves right now but i want to change my feild in wanna join it feild..is it ok if i do c dac. I mean will it make any difference because i have mechanical company experince. m a 2010 passout

i have completed my electrical engg,'m workng in an it company as a tech support,,,,,,,,want to do some course related to my field so that i can have a good career in electrical field.,,,,...waiting for suggestions.......

hi..i completed my electrical engg,currently working in an IT company,,,,want to do some course related to my field,,so that i can hav a gud career in electrical field....so wating for suggestions.....

Which is better MCA or MTECH after B.TECH electrical engineering

After completing B.Tech you can complete different courses like SAP and PLC.Also you may join any company as the experience of the job will help you a lot in the future.But if you insist to carry on studying then you should go for MBA as it is the highly demanding subject in the present day.

What are the chances of placement after doing CDAC and which course is better for an electrical engg..... there are mainly two courses as i found .... embeded system and VLSI? When the new batch will start?

What are the chances of Placement after doing CDAC and which course is better.... embeded system or VLSI as i found it ...... for an electrical engg........

Originally Posted by Unregistered

i am intrested in it feild and i was thinking to do c dac.. I am working for crompton greaves right now but i want to change my feild in wanna join it feild..is it ok if i do c dac. I mean will it make any difference because i have mechanical company experince. m a 2010 passout

hi frend i worked for cummins dealer. is there any chance of getting into cromptongreaves electrical side?

1)After B.Tech in Electrical best course you can go for in

#Software side

*CCNA
*Dot Net
*SAP
*IBM Main Frame
*NIIT
*C,C++ and Java
*Hacking is new course

#Automation Side

*PLC

*SCADA

)After B.Tech in Electrical best course you can go for in

#Software side

*CCNA
*Dot Net
*SAP
*IBM Main Frame
*NIIT
*C,C++ and Java
*Hacking is new course

#Automation Side

*PLC
*SCADA
*DCS
*CADD
*Six Sigma

Hi dear,

after B.tech in electrical engineering you may join in any company for job. because work experience will be considered as best when you will join in any other company.

but if you are unable to get job and you want to some courses before joining into job then you may go for it. SAP and PLC both are very good course you may do it from any good institution. also you may do some course on transformer. there are course available for transformer.

you may go for industrial training. this will be also very much helpful to get job in good company. also you will face advantage when you will do your work if you have training from that particular industry.

you may do some courses on power plant also. some power system design courses are also available in good institution. choose the best suitable one for you in which field later you want to do job.

Thanks

After your BE you can do CDAC that is centre for development of advance computing a six month course. For this you have to appear for CDAC exam. CDAC is conducted twice in a year. there are only four centres in India which provide CDAC course. This is one of the best course you can do after your BE. As the course is so good that you get the placement just after you complete your course in reputed companies undoubtedly. I am saying all this with confidence because this is my personal experience. so go for CDAC.