Education and Career Forum

Sir,Would you please inform me the syllabus of Bharat Electronics Limited Probationary Enggineers test.I was in CSE branch.If possible would you please mail me the syllabus and previous question papers .

Originally Posted by arun9

Sir,Would you please inform me the syllabus of Bharat Electronics Limited Probationary Enggineers test.I was in CSE branch.If possible would you please mail me the syllabus and previous question papers .

Hi
There are 153 posta for Probationary Engineer.
Salary of Rs.16400-40500 will be given to you if you are selected.

~I have attached one documen.
Please check that.
~And you can get more placement question from below given site.
http://way2freshers.com/placement-papers/bel-paper/bel-placement-papers-bangalore-21st-august-2004.html
http://way2freshers.com/placement-papers/bel-paper/bel-technical-electronics.html
Good luck

Dear friend

If you dont find syllabus for BHEL PE test, then please contact to the concerned department, they will provide you syllabus. So please contact him imediately Or
for more detail, then please visit this given site. All the necessary detail are
availiable in this site-


http://specialtest.in/bel2010

the syllabus is as follows:
Networks: Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks.
Electronic Devices: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twintub CMOS process.
Analog Circuits: Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and waveshaping circuits, 555 Timers. Power supplies.
Digital circuits: Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing.
Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems.
Control Systems: Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral- Derivative (PID) control. State variable representation and solution of state equation of LTI control systems.
Communications: Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.
Electromagnetics: Elements of vector calculus: divergence and curl; Gauss’ and Stokes’ theorems, Maxwell’s equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.


pattern is same and sought like this.

sir am studying BE in computer science last year.. i have a big dream of becoming a bel employee.. wil u plz tel me wat are all the preparations should i make.. wil u suggest me the books shud i refer.. my email id is: [email protected]

i am giving you the gate syllabus,in pattern with bel pe test:
Networks: Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks.
Electronic Devices: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twintub CMOS process.
Analog Circuits: Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and waveshaping circuits, 555 Timers. Power supplies.
Digital circuits: Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing.
Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems.
Control Systems: Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral- Derivative (PID) control. State variable representation and solution of state equation of LTI control systems.
Communications: Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.
Electromagnetics: Elements of vector calculus: divergence and curl; Gauss’ and Stokes’ theorems, Maxwell’s equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.

cut off for pe in bel in 2009?

i have been selected in written test of bel for pe, i'l hav to appear for interview in 10 days, what sort of interview it will be? Tech or gen?
what would be the approx gross salary per month?

In bel when exam conducted for recruitment for ece engineer. pre final year student participate in that exam or not?

I need the syllabus for Graduates in Engineering for the Apprenticeship Training

HI DEAR FRIEND,

There are many posts for Probationary Engineer:-

Electronics-80
Mechanical-30
Computer science-38
Civil-4
Chemical-1

The syllabus is as follows:-

-Networks
-Analog Circuits
-Control Systems
-Communications
-Electromagnetics


best wishes for your future.............

hi guys when will be the BEL all india entrance exam of 2011 pass out people or 2011 year recruitment of software engineers?if you know please inform to [email protected]

If you have not find syllabus for BHEL PE test, then please contact to the concerned department, they will provide you syllabus. contact him Or
for more detail, then please visit this given site. All the necessary detail are
availiable in this site-


http://specialtest.in/bel2010

Hello Sir,

Am 2008 B.E passed out, I have 1 year experience in HAL as apprentice trainee and now am working in Cognizant as Sr.System Executive.My DOB : 13.01.1987.I wish to switch to a government job badly Sir.Could you please help me providing below details.It would be a great favou to r to me Sir:

1) Do I have eligibility to appy for BEL PE post 2011.
2) Do I need to update my Cognizant experience in my CV.As they might not consider software professionals?
3) Will they neglect our CV as am already working?

Thanks a lot in advance.

sir would you plz send me the syllabus of bharat electronics limited pe test .I am the student of b.tech final year ,i am also in need of perevious year question paper sir plz send me all the detail at [email protected] thanks sir.

what is the cutoff marks for bel

many posts for Probationary Engineer:-

Electronics-80
Mechanical-30
Computer science-38
Civil-4
Chemical-1

The syllabus is as follows:-

-Networks
-Analog Circuits
-Control Systems

Syllabus for BEL PE for electronics and communication branch:


Networks: Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks.

Electronic Devices: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twintub CMOS process.

Analog Circuits: Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and waveshaping circuits, 555 Timers. Power supplies.

Digital circuits: Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing.

Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems.

Control Systems: Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral- Derivative (PID) control. State variable representation and solution of state equation of LTI control systems.

Communications: Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.

Electromagnetics: Elements of vector calculus: divergence and curl; Gauss’ and Stokes’ theorems, Maxwell’s equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.

PLZ PROVIDE ME EXAM PATTERN AND SYLLABUS FOR MECHANICAL ENGG. OF BEL RECRUIT.....................

plz send me the syllabus for bel probationary engineer exam to be held on 26 june..i hv got it bt nt been able to copy or download it..,send it on my e-mail [email protected] you

plz send me the sample question paper for PE(Electronics & telecommunication).....on my mail-id- [email protected] as early possible.......

Thank you

plz plz tell me the sample question paper foe PE (Computer science) and syllabus.............on my mail id [email protected].
thank you

plz send me the sample question paper for PE( Mechanical).....on my mail-id- [email protected] as early possible.......

Thank you

hi.... Pls send me the syllabus and sample placement papers of BEL PE ( Electronics and communication).... My id is [email protected]

thanks in advance....

Sir,Would you please inform me the syllabus of Bharat Electronics Limited Probationary Enggineers test.I was in electronics& communication branch.If possible would you please mail me the syllabus and previous question papers

[email protected]

Sir,Would you please inform me the syllabus of Bharat Electronics Limited Probationary Enggineers test.I was in elecrtronics & communication branch.If possible would you please mail me the syllabus and previous question papers

sir i am sankalp pls send me sample paper & syllabus for BEL PE (Electronics and communicaton)
my id [email protected]
thanks....

plz send me the syllabus for bel pe (in mechanical engg.) at
[email protected]
thnx

hello, kindly post mechanical syllabus for BEL Mechanical ASAP
thanks :)

pls send me syllabus and question papers for bel pe for computer sci stream..........my id is [email protected]

IS THERE ANY NEGETIVE MARKING IN TEST

Sir plz post the previous year question papers of BEL electronics and communication on id [email protected] alot.....

Please send syllabus for MECHANICAL branch asap. at [email protected]

Hello Sir,

Are there aptitude question in BEL written test???Plz inform me,my id is [email protected]

kindly send me the syllabus for the mechanical engg

pls send me the sylabus for Bel exam for Computer science branch at [email protected]

pls send me the syllabus for Bel exam for Computer science branch at [email protected]

sir,Would you please inform me the syllabus of Bharat Electronics Limited Probationary Enggineers test.I was in elecrtronics & communication branch.If possible would you please mail me the syllabus and previous question papers.and also plz post the previous year question papers of BEL electronics and communication.my mail id is [email protected]

SIR PLZ
IAM COMPUTER SCIENCE ENGG IAM WRITTEN BEL EXAM PLZ CAN U SEND ME MAIL ABOUT BEL EXAM SYLLABUS PLZZZZ
MY MAIL ID [email protected]

Bel syllabus for computr science engg plz send me

kindly send me the syllabus for the mechanical engg
to Email [email protected]

Please send me the syllabus of BEL for Electronics & Communication branch at [email protected]

Dear All,
There is a request to please provide the detail syllabus and if possible some sample previous year Question paper (or its not confusing and easy link) for BEL (Computer Science branch).Several aspirants are unable to get it properly.You can either post it here or can mail me at :[email protected].

Thanks a lot.

Sir,Would you please inform me the syllabus of Bharat Electronics Limited Probationary Enggineers test.I was in CSE branch.If possible would you please mail me the syllabus and previous question papers .
[email protected]

pls send me the syllabus and some previous question papers for BEL PE exam ( electronics and communication branch) 2 my mail id:[email protected]
thanks in advance.....

@ all mtrfkr's send me the syllabus of mechanical engineering

pls send me the syllabus and some previous question papers for BEL PE exam ( electronics and communication branch) 2 my mail id:[email protected]

pls someone tell me the reference book for BEL PE 2011( electronics and communcation) to my id [email protected]
Thanks in advance . . .

pls confirm me that
G.K &G.S alos a part of question paper

Pls send me the syllabus and sample placement papers of BEL PE ( mech engg) my mail is [email protected]