Education and Career Forum

Pls send me last five years question & answer papers of RRB exam junior engineer-II track machine?

Please help

Railway Engineering Exam Solved Questions:




1. The limiting value of super elevation of board gauge in Indian Railways is:
(a) 16.50 cm (b) 30 cm (c) 15 cm (d) 10 cm
Ans : A

2. Which of the following is not a part of rail engine?
(a) Tender (b) Stream turbine (c) Boiler (d) Fire box
Ans : B

3. The staggered rails joints are usually provided on:
(a) Bridge (b) Curves (c) Branching (d) Tangents
Ans : B

4. In broad gauge, the clear horizontal distance between the inner faces of two parallel rails forming the track is:
(a) 1 m (b) 1.676 m (c) 0.6096 m (d) 0.792 m
Ans : B

5. Generally the shape of fish plate is:
(a) elliptical (b) bone shaped (c) circular (d) rectangular
Ans : B

6. The track capacity can be increased by:
(a) Faster movement of trains on the track
(b) By using more powerful engines
(c) All the above
(d) None of the above
Ans : C

7. Detonating signals are used:
(a) for noisy engines
(b) during foggy and cloudy weather
(c) for deaf drivers
(d) not now, were in use in nineteenth century only
Ans : B

8. Wider gauge permits:
(a) sleeper gradients (b) low axle load
(c) higher operating speeds (d) sharp curves
Ans : C

9. The railway station at which a track line meets a main line is called:
(a) terminal station (b) flag station
(c) way side station (d) junction station
Ans : D

10. Points and crossings are provided for change of ….on permanent ways.
(a) gauge (b) direction and gradient
(c) direction (d) gradient
Ans : C

11. The chart used for recording the condition of track is known as:
(a) Rolling chart (b) Track chart
(c) Hallade chart (d) Vibro chart
Ans: C

12. The most common system of signaling in India is the …… system.
(a) automatic block (b) section clear system
(c) absolute block (d) pilot guard system
Ans : C

13. The feeder gauge …. is commonly used for feeding raw materials to big Government manufacturing concerns as well as to private factories such as steel plants, oil refineries, sugar factories etc.
(a) 0.6096 m (b) 0.792 m (c) 1m (d) 1.676 m
Ans : A

14. A parabolic curve introduced between straight and a circular curve or between two branches of a compound curve for ease, comfort and safety of movement of trains on curve is called:
(a) Spur curve (b) Transition curve
(c) Summit curve (d) Valley curve
Ans : B

15. The railway track from which a train is to be diverted is called:
(a) branch track (b) points and crossing
(c) main or through track (d) all above
Ans : C

16. An expansion gap of …. is usually kept between the adjoining rail ends to allow for expansion of rail, due to variation in temperature.
(a) 1 to 3 mm (b) 10 to 15 mm
(c) 6 to 8 mm (d) 3 to 5 mm
Ans : C

17. Which one of the following bolts is not used in rail track:
(a) Fang bolt (b) Eye bolt (c) Rag bolt (d) Fish bolt
Ans : B

18. The gradient which requires one or more additional locomotive for hauling the load over the gradient is called:
(a) Up-gradient (b) Pusher gradient
(c) Steep gradient (d) Momentum gradient
Ans : B

19. In locomotive ‘hunting’ is:
(a) Movement of locomotive in vertical plane perpendicular to its movement along the track
(b) Sinuous path taken by engine as against the alignment of the track
(c) Motion after brakes have been applied
(d) Combination of A and B above
Ans : D

20. The rails which get battered due to action of wheels over the end of the rails are called:
(a) Hogged rails (b) Roaring rails
(c) Creep rails (d) Bucking rails
Ans : A

21. As per Indian standard, the recommended width of ballast section at foot level of rails for broad gauge tracks should be:
(a) 4.38 m (b) 3.35 m (c) 1.83 m (d) 2.25 m
Ans : B

22. The minimum length of a passenger platform for broad gauge railway should not be less than:
(a) 305 m (b) 183 m (c) 495 m (d) 250 m
Ans : A

23. For wooden sleepers, size of the ballast should be:
(a) 2.54 cm (b) 10.16 cm (c) 3.8 cm (d) 5.1 cm
Ans : C

24. The length of track under the control of a Ganger is:
(a) 10 to 15 Km (b) 5 to 6 KM
(c) 3 to 5 KM (d) 1 to 2 KM
Ans : B




25. The maximum rising gradient which is provided keeping the power of locomotive in view, is called
(a) Momentum gradient (b) Pusher gradient
(c) Down gradient (d) Ruling gradient
Ans : D

26. The latest system of signaling introduced is:
(a) C.T.C. system (b) pilot guard system
(c) section clear system (d) automatic block system
Ans : A

27. The maximum gradient for broad gauge in station yards in Indian Railways is:
(a) 1 in 100 (b) 1 in 1000 (c) 1in 200 (d) 1 in 400
Ans : D

28. The force which resists the forward movement and speed of train is called:
(a) Track modulus (b) Hauling resistance
(c) friction (d) Tractive resistance
Ans : D

29. The number of fish bolts used for joining the rails with the help of fish plates, is generally:
(a) 4 (b) 8 (c) 2 (d) 6
Ans : A

30. The Railways provided underground at a depth of about 18 m or more are called:
(a) Mono railway (b) Underground railway
(c) Railway (d) Tube railway
Ans : D

31. The creep in rails is measured in:
(a) cm/kg (b) cm (c) Kg/cm (d) kg cm
Ans : B

32. The art of providing an outward slope of …. to the treads of wheels of rolling stock is known as coning of wheels.
(a) 1 in 30 (b) 1 in 10 (c) 1 in 4 (d) 1 in 20
Ans : D

33. The process of connecting a track length by an electric circuit is known as track circuiting and the sleepers which are suitable for it are:
(a) cast iron sleepers (b) steel sleepers
(c) wooden sleepers (d) all above are suitable
Ans : C

34. The yard where trains and other loads are received, sorted out, trains formed and dispatched onwards are known as:
(a) locomotive yard (b) goods yard
(c) marshalling yard (d) station yard
Ans : C

35. Which one of the following is expected to have shorter life?
(a) Steam engine (b) Diesel engine
(c) Electric engine (d) Shunting engine
And : B

36. The movable end of the tapered rail, by means of which the flanged wheels of the train are diverted from one track to another is known as:
(a) Toe (b) Stud (c) Heel (d) Flare
Ans : A

37. When a rail loses its weight by 5%, it should be renewed and the old one can be used on unimportant tracks, but the rails which have lost their weight by more than …., should not be used on any track under any circumstances.
(a) 8% (b) 33.3% (c) 10% (d) 20%
Ans : C

38. A dynamometer car is used for:
(a) Tourists (b) Dinning facilities
(c) Inspection of administrative officers
(d) Recording the condition of track
Ans : D

39. When a railway line crosses a valley, a ridge like structure consisting of a series of piers, piles or trestles on which steel girders are placed and which is constructed usually for small spans is known as:
(a) Bridge (b) Tunnel (c) Viaduct (d) Aqueduct
Ans : C

40. The movable tapered end of the tongue rail is known as:
(a) heel of switch (b) toe of switch
(c) stretcher bar (d) throw of switch
Ans : B

41. In railways, super elevation is provided to:
(a) facilitate drainage
(b) counteract the centrifugal push
(c) counteract the centripetal pull
(d) have all the effects mentioned above
Ans : B

42. The rails which help in channelising the wheels in their proper routes are known as:
(a) Guard rails (b) Wing rails? (c) Check rails (d) Lead rails
Ans : B

43. The shape of wheels of rolling stock is:
(a) Tapered with flange on outside
(b) Parallel with flange on inside
(c) Tapered with flange on inside
(d) Parallel with flange on outside
Ans : C

44. The tractive resistance of the route in railways as compared to roadways will be:
(a) same (b) more (c) low (d) not comparable
Ans : C

45. Sand is used as ballast incase of:
(a) steel sleepers
(b) wooden sleepers
(c) reinforced concrete sleepers
(d) cast iron sleepers
Ans : D

46. Arm type fixed signals, fitted on a vertical post fixed at the side of a track, are called:
(a) Warner signals (b) Starter signals
(c) Semaphore signals (d) Cab signals
Ans : C

47. The Railway provided just below the ground level are called:
(a) Tube railway (b) Underground railway
(c) Mono railway (d) Railway
Ans : B

48. Creeping of rails will be reduced by using:
(a) Bearing plates (b) Spikes (c) Chairs (d) Anchors
Ans : D

49. Generally the weight/metre of the rails used in broad gauge is:
(a) 55 kg (b) 45 kg (c) 35 kg (d) 65 kg
Ans : A

50. The additional track connected to main line at both of its ends is called:
(a) running line (b) loop line
(c) main line (d) none are correct
Ans : B

refer these links
http://education.latestt.com/questio...uestion-Papers
www.rrbbhopal.gov.in

hai , i am doing my civil engg i want to write railway recruitment board examnation for civil engg,,, plese send me a prwvious question papers

Syllabus and books for junior engineer (track machine) in railway.

sir i want model question paper for junior engineer civil

RRB Juniour Engineer Syllabus for Electronics & Communication Engineering?

send me last 5 years question & answer papers of RRB exam junior engineer-II track machine?

please sent me last five years question paper for rrb junior electrical engineer

[email protected]

sir please send me previous year qus paper for section engg, civil engg.
mail id: [email protected]

plz send me last five year que. paper for j e (track machine) , bhopal

mail id; [email protected]

plz send me the syllabus of junior engg (mechanical) exams andsolved question papers for last five years

Re: Last 5 year question papers of RRB exam Junior Engineer II Track Machine?

PLZ send me the syllabus of junior engg (Instrumentation) exams and solved question papers for last five years Junior Engineer Track Machine
mail id; [email protected]

plz send me last 5 year question papers of RRB exam Junior Engineer electronics and communication

mail id : [email protected]

please,
Send me the syllabus for track machine in RRB and also 5 years solved sample paper for its preparation.
Mail I.D.
[email protected]

please send me the syllabus of track machine in rrb and also 5 years solved question paper for my best preparation.
mail I.D.
[email protected]

]Pls send me last five years question & answer papers of RRB exam junior engineer-II track machine?

pls,send me the last year question paper,syllabus and notes for JE track

plz send me the syllabus of junior engg (mechanical) exams andsolved question papers for last five years, my e-maol [email protected]

Sir,
I am preparing for rrb je mechanical exam.
please send me previous years papers at [email protected]
thanking you,
anuj kumar

sir, i am preapear for exam of rrb junior engineer civil, so please send me previous 5year's question paper at my id. my id is ([email protected])

sir pls give me the solved paper of JE TRACK MACHINE of last five year.

my eMAIL ID IS [email protected]

rrb last 5 years jr.section engineer civil question papers?

Sir, please send last five years question of railway je of civil branch & syllabus 2012.
email [email protected]

sir
sent me a sample question of Rural Electric Board Bangladesh for sub-assistant engineering job exam

hai,
please sent last 5 years sample question in junior engineer (electrical).
[email protected]

sir , i need the type skill test details of clerk cum typist post in rrb

Sir, please send last five years question of railway je of civil branch & syllabus 2012.

Source: http://entrance-exam.net/forum/general-discussion/last-5-year-question-papers-rrb-exam-junior-engineer-ii-track-machine-59104.html#ixzz1xOTspurc

rrb last 5 years jr.section engineer civil question papers?

hi dear friend,
Railway Engineering Exam Solved Questions:




1. The limiting value of super elevation of board gauge in Indian Railways is:
(a) 16.50 cm (b) 30 cm (c) 15 cm (d) 10 cm
Ans : A

2. Which of the following is not a part of rail engine?
(a) Tender (b) Stream turbine (c) Boiler (d) Fire box
Ans : B

3. The staggered rails joints are usually provided on:
(a) Bridge (b) Curves (c) Branching (d) Tangents
Ans : B

4. In broad gauge, the clear horizontal distance between the inner faces of two parallel rails forming the track is:
(a) 1 m (b) 1.676 m (c) 0.6096 m (d) 0.792 m
Ans : B

5. Generally the shape of fish plate is:
(a) elliptical (b) bone shaped (c) circular (d) rectangular
Ans : B

6. The track capacity can be increased by:
(a) Faster movement of trains on the track
(b) By using more powerful engines
(c) All the above
(d) None of the above
Ans : C

7. Detonating signals are used:
(a) for noisy engines
(b) during foggy and cloudy weather
(c) for deaf drivers
(d) not now, were in use in nineteenth century only
Ans : B

8. Wider gauge permits:
(a) sleeper gradients (b) low axle load
(c) higher operating speeds (d) sharp curves
Ans : C

9. The railway station at which a track line meets a main line is called:
(a) terminal station (b) flag station
(c) way side station (d) junction station
Ans : D

10. Points and crossings are provided for change of ….on permanent ways.
(a) gauge (b) direction and gradient
(c) direction (d) gradient
Ans : C

11. The chart used for recording the condition of track is known as:
(a) Rolling chart (b) Track chart
(c) Hallade chart (d) Vibro chart
Ans: C

12. The most common system of signaling in India is the …… system.
(a) automatic block (b) section clear system
(c) absolute block (d) pilot guard system
Ans : C

13. The feeder gauge …. is commonly used for feeding raw materials to big Government manufacturing concerns as well as to private factories such as steel plants, oil refineries, sugar factories etc.
(a) 0.6096 m (b) 0.792 m (c) 1m (d) 1.676 m
Ans : A

14. A parabolic curve introduced between straight and a circular curve or between two branches of a compound curve for ease, comfort and safety of movement of trains on curve is called:
(a) Spur curve (b) Transition curve
(c) Summit curve (d) Valley curve
Ans : B

15. The railway track from which a train is to be diverted is called:
(a) branch track (b) points and crossing
(c) main or through track (d) all above
Ans : C

16. An expansion gap of …. is usually kept between the adjoining rail ends to allow for expansion of rail, due to variation in temperature.
(a) 1 to 3 mm (b) 10 to 15 mm
(c) 6 to 8 mm (d) 3 to 5 mm
Ans : C

17. Which one of the following bolts is not used in rail track:
(a) Fang bolt (b) Eye bolt (c) Rag bolt (d) Fish bolt
Ans : B

18. The gradient which requires one or more additional locomotive for hauling the load over the gradient is called:
(a) Up-gradient (b) Pusher gradient
(c) Steep gradient (d) Momentum gradient
Ans : B

19. In locomotive ‘hunting’ is:
(a) Movement of locomotive in vertical plane perpendicular to its movement along the track
(b) Sinuous path taken by engine as against the alignment of the track
(c) Motion after brakes have been applied
(d) Combination of A and B above
Ans : D

20. The rails which get battered due to action of wheels over the end of the rails are called:
(a) Hogged rails (b) Roaring rails
(c) Creep rails (d) Bucking rails
Ans : A

21. As per Indian standard, the recommended width of ballast section at foot level of rails for broad gauge tracks should be:
(a) 4.38 m (b) 3.35 m (c) 1.83 m (d) 2.25 m
Ans : B

22. The minimum length of a passenger platform for broad gauge railway should not be less than:
(a) 305 m (b) 183 m (c) 495 m (d) 250 m
Ans : A

23. For wooden sleepers, size of the ballast should be:
(a) 2.54 cm (b) 10.16 cm (c) 3.8 cm (d) 5.1 cm
Ans : C

24. The length of track under the control of a Ganger is:
(a) 10 to 15 Km (b) 5 to 6 KM
(c) 3 to 5 KM (d) 1 to 2 KM
Ans : B




25. The maximum rising gradient which is provided keeping the power of locomotive in view, is called
(a) Momentum gradient (b) Pusher gradient
(c) Down gradient (d) Ruling gradient
Ans : D

26. The latest system of signaling introduced is:
(a) C.T.C. system (b) pilot guard system
(c) section clear system (d) automatic block system
Ans : A

27. The maximum gradient for broad gauge in station yards in Indian Railways is:
(a) 1 in 100 (b) 1 in 1000 (c) 1in 200 (d) 1 in 400
Ans : D

28. The force which resists the forward movement and speed of train is called:
(a) Track modulus (b) Hauling resistance
(c) friction (d) Tractive resistance
Ans : D

29. The number of fish bolts used for joining the rails with the help of fish plates, is generally:
(a) 4 (b) 8 (c) 2 (d) 6
Ans : A

30. The Railways provided underground at a depth of about 18 m or more are called:
(a) Mono railway (b) Underground railway
(c) Railway (d) Tube railway
Ans : D

31. The creep in rails is measured in:
(a) cm/kg (b) cm (c) Kg/cm (d) kg cm
Ans : B

32. The art of providing an outward slope of …. to the treads of wheels of rolling stock is known as coning of wheels.
(a) 1 in 30 (b) 1 in 10 (c) 1 in 4 (d) 1 in 20
Ans : D

33. The process of connecting a track length by an electric circuit is known as track circuiting and the sleepers which are suitable for it are:
(a) cast iron sleepers (b) steel sleepers
(c) wooden sleepers (d) all above are suitable
Ans : C

34. The yard where trains and other loads are received, sorted out, trains formed and dispatched onwards are known as:
(a) locomotive yard (b) goods yard
(c) marshalling yard (d) station yard
Ans : C

35. Which one of the following is expected to have shorter life?
(a) Steam engine (b) Diesel engine
(c) Electric engine (d) Shunting engine
And : B

36. The movable end of the tapered rail, by means of which the flanged wheels of the train are diverted from one track to another is known as:
(a) Toe (b) Stud (c) Heel (d) Flare
Ans : A

37. When a rail loses its weight by 5%, it should be renewed and the old one can be used on unimportant tracks, but the rails which have lost their weight by more than …., should not be used on any track under any circumstances.
(a) 8% (b) 33.3% (c) 10% (d) 20%
Ans : C

38. A dynamometer car is used for:
(a) Tourists (b) Dinning facilities
(c) Inspection of administrative officers
(d) Recording the condition of track
Ans : D

39. When a railway line crosses a valley, a ridge like structure consisting of a series of piers, piles or trestles on which steel girders are placed and which is constructed usually for small spans is known as:
(a) Bridge (b) Tunnel (c) Viaduct (d) Aqueduct
Ans : C

40. The movable tapered end of the tongue rail is known as:
(a) heel of switch (b) toe of switch
(c) stretcher bar (d) throw of switch
Ans : B

41. In railways, super elevation is provided to:
(a) facilitate drainage
(b) counteract the centrifugal push
(c) counteract the centripetal pull
(d) have all the effects mentioned above
Ans : B

42. The rails which help in channelising the wheels in their proper routes are known as:
(a) Guard rails (b) Wing rails? (c) Check rails (d) Lead rails
Ans : B

43. The shape of wheels of rolling stock is:
(a) Tapered with flange on outside
(b) Parallel with flange on inside
(c) Tapered with flange on inside
(d) Parallel with flange on outside
Ans : C

44. The tractive resistance of the route in railways as compared to roadways will be:
(a) same (b) more (c) low (d) not comparable
Ans : C

45. Sand is used as ballast incase of:
(a) steel sleepers
(b) wooden sleepers
(c) reinforced concrete sleepers
(d) cast iron sleepers
Ans : D

46. Arm type fixed signals, fitted on a vertical post fixed at the side of a track, are called:
(a) Warner signals (b) Starter signals
(c) Semaphore signals (d) Cab signals
Ans : C

47. The Railway provided just below the ground level are called:
(a) Tube railway (b) Underground railway
(c) Mono railway (d) Railway
Ans : B

48. Creeping of rails will be reduced by using:
(a) Bearing plates (b) Spikes (c) Chairs (d) Anchors
Ans : D

49. Generally the weight/metre of the rails used in broad gauge is:
(a) 55 kg (b) 45 kg (c) 35 kg (d) 65 kg
Ans : A

50. The additional track connected to main line at both of its ends is called:
(a) running line (b) loop line
(c) main line (d) none are correct
Ans : B
thanks

Dear sir,
please send me previous exam papers of JE mechanical

Last 5 year question papers of RRB exam Junior Engineer II Track Machine?

pls send for this mail id:[email protected]

pls send last 5 year question papers for junior engineer track machine

mail id:[email protected]

Originally Posted by Unregistered

Pls send me last five years question & answer papers of RRB exam junior engineer-II track machine?

Please help

wasim khan.............................................. .................................................. .................................................. .................................................. .............

Originally Posted by Unregistered

pls send last 5 year question papers for junior engineer track machine

mail id:[email protected]

Hi friend

I have attached the question papers pertaining to junior engineer track machine. I hope it will help you.

Good luck

Originally Posted by ab7777

Hi friend

I have attached the question papers pertaining to junior engineer track machine. I hope it will help you.

Good luck

sir send me the track machine jr engg question papers for me also
mailid - [email protected]

please send last 5 year question papers of rrb exam junior engineer track machine on
[email protected]

junior engineer for trrack machine previous question papers and genderal studies papers plz send my mail id
[email protected]

Pls send me last five years question & answer papers of RRB exam junior engineer-II track machine?

Please help


send me [email protected]

Dear sir,
please send me previous exam papers of JE signal on my mail id [email protected]
thanks

Sir i want know the new pattern of JE TRACK MACHINE

Dear sir,
please send me previous exam papers of JE on my mail id [email protected]
thanks

sir,
plz send last five year question paper for je(track machine in RRB.

dear all
i requst pls send me the previous year question paper for the post of JE(track machine) on mail id [email protected]

hello,
Hi friend

I have attached the question papers pertaining to junior engineer track machine. I hope it will help you.

Good luck

regards

pls send me the previous year question paper for the post of JE(track machine) on mail id [email protected]

sir i want syllabus and previous year question paperof RRB JUNIOR ENGNEER INFORMATION TECHNOLOGY. My email id is
[email protected]

Hello sir please send me the question papers of junior engineer (Track machine)...to this [email protected]

sir,
plz send last five year question paper for je(track machine) in RRB.

My mail id is [email protected]

sir please send me the previous question papers of junior engineer TRACK MACHINE to my mail [email protected]