Education and Career Forum

sir im B.tech pass out and searching for concern field where i can progress
but im unable to. i have tried for telecommunication but in the starting they are asking for the short term course and what they are providing r to costly and not offerdable
n when going for it field but im not satisfied to select that field because i want to continue in my core field only
is automation good for an ece candidate

there is different short term course for the ece .

these are as followings.

VLSI

EMBEDED SYSTEM

NETWORKING

PLC

so you can do the short term course in these all.

hello friend,
As you are interested in your core field why going for other stream like automation which is related with production/automobile/mechanical industries.
You can do some courses on networking if you like this subject or go for the JTO exam which can really settle your career as it provides a central govt job .
Networking is very interesting field these days and you can do some renowned courses in it which are also not costly that much.

All the best!

dear friend............

you are a B.tech. pass out and searching for concern field ,
but you are unable to do this. you have tried for telecommunication but in the starting they are asking for the short term course and what they are providing r to costly and not affordable , and when going for it field but you are not satisfied to select that field because you want to continue in your core field only is automation good for an ece candidate.

See friend you are in the seance wrong because if you get a good job in the it sector compared to core department , then you must choose the it sector job , if it is not possible for you then you have to work hard and take yourself preparation and give different kind of exam in this section.

For this you may go through from different institute for various kind of subjects like..........
1.Digital Communication
2.Analog Communication
3.VLSI
4.Antena
5.Control System
6.Embedded System
7.Computer Networking --one of the most interesting subject and there are so many option to get job from this subject.

Otherwise the rest of the subjects are obviously good.
So good luck.....

as you are an ECE student i will suggest telecommunication field is a very good field. if they ask for other course and you have interest on it then do some courses on networking. it is very use full in telecommunication.

don't choose automation industry as you are a ECE student. if you don't like telecommunication then go to the other core electronics company like BHEL, ISRO, DRDO etc. otherwise try to do m.tech in any core subject of ECE. best of luck.

Dear Friend,

Its future is really very very bright,through this stream you can go various sectors in higher study such as :

1:Research(ISRO),
2:Mobile Communication,
3:Microwave Communication
4:Robotics, defense,
5:Radio Communication,
6:TV broadcasting,
7:Telegraphy & Telephony,
8:VLSI design,
9:Nuclear Science,
10:Wireless Communication etc.....


If you have to do the short term courses than you can complete any of he following courses:
1:course on VLSI Design .
2:course on PLC
3:course on PLC & SCADA
4:course on Networking
5:course on Embedded System
6:course on FPGA, ASIC design etc.....

After the all completion of the course there are so many option for job in Govt as well as Private sectors.
some current jobs are as follows:
1irectorate General Border Security Force (BSF)
Communicational Diroctrate(OT Technician) Age Brah20-25yr.
Pay scale Rs. 5,200/- to 20,200/-

2:Brah-Mos Aerospace,new Delhi (Deputy designer)

3:Brah-Mos Aerospace,Hyderabad ,Nagpur (Deputy designer)

4:Bharat Electronics Limited(BEL)

5:Bharat Sanchar Nigam Limited(BSNL)

for all other details jobs visit:http://beta.freshersworld.com/jobs

For details visit:http://sarkari-naukri.blogspot.com/

Beside those jobs there are another jobs such as :
1:Capita Technology

2:Cafe Galilee

3:Pcs Security Pte Ltd

4:Ar Transportation

5:Roots Communications Pte Ltd etc...

for details visit:http://www.streetdirectory.com/jobs/singapore/industry/sub_cat/27/engineering/17/telecommunication__wireless__radio/

in general the salary starts can get anywhere between Rs. 20,000/- to Rs.35,000/- per month .

Good Luck.

Dear Friend,

Its future is really very very bright,through this stream you can go various sectors in higher study such as :

1:Research(ISRO),
2:Mobile Communication,
3:Microwave Communication
4:Robotics, defense,
5:Radio Communication,
6:TV broadcasting,
7:Telegraphy & Telephony,
8:VLSI design,
9:Nuclear Science,
10:Wireless Communication etc.....


If you have to do the short term courses than you can complete any of he following courses:
1:course on VLSI Design .
2:course on PLC
3:course on PLC & SCADA
4:course on Networking
5:course on Embedded System
6:course on FPGA, ASIC design etc.....

After the all completion of the course there are so many option for job in Govt as well as Private sectors.
some current jobs are as follows:
1irectorate General Border Security Force (BSF)
Communicational Diroctrate(OT Technician) Age Brah20-25yr.
Pay scale Rs. 5,200/- to 20,200/-

2:Brah-Mos Aerospace,new Delhi (Deputy designer)

3:Brah-Mos Aerospace,Hyderabad ,Nagpur (Deputy designer)

4:Bharat Electronics Limited(BEL)

5:Bharat Sanchar Nigam Limited(BSNL)

for all other details jobs visit:http://beta.freshersworld.com/jobs

For details visit:http://sarkari-naukri.blogspot.com/

Beside those jobs there are another jobs such as :
1:Capita Technology

2:Cafe Galilee

3:Pcs Security Pte Ltd

4:Ar Transportation

5:Roots Communications Pte Ltd etc...

for details visit:http://www.streetdirectory.com/jobs/singapore/industry/sub_cat/27/engineering/17/telecommunication__wireless__radio/

in general the salary starts can get anywhere between Rs. 20,000/- to Rs.35,000/- per month .

Good Luck.

for a b.tech ECE ,,,doing course in plc is best or on fibre optics is better..

future in ece

I am ece background and i am 3rd year ... I want to do the courses in plc &scada to get the core opportunities...will it really useful for the ece people to get into the core industries ..?//please reply me....

as for an ece students whether the course of plc is better as compared to scada training

As you are interested in your core field why going for other stream like automation which is related with production/automobile/mechanical industries.
You can do some courses on networking if you like this subject or go for the JTO exam which can really settle your career as it provides a central govt job .
Networking is very interesting field these days and you can do some renowned courses in it which are also not costly that much.

beta it is not related to ece go for digital communication

which short term courses a e.c student sud do to make his profile heavy and better ..and to make his carrer bright
?

Sir i hv completed my B.tech in 2011..I hv also done a short term course of embedded system.....Bt i m unable to find any jobs in this feild...... I m very much keen to work on this feild.....pls help me out....

Originally Posted by razi ansari

sir im B.tech pass out and searching for concern field where i can progress
but im unable to. i have tried for telecommunication but in the starting they are asking for the short term course and what they are providing r to costly and not offerdable
n when going for it field but im not satisfied to select that field because i want to continue in my core field only
is automation good for an ece candidate

Hello you can opt for Automation training like PLC,SCADA,DRIVES,HMI etc.the future for this tremendous.

i am a final year student B.tech(ece). I have a keen interest in the automation industry, specially the part where sensors are involved. What is the scope for me int this field?...i have heard about the subject MECHATRONICS which combines mechanical and electronics aspects of engineering into one.

hello I'm a B.E(ECE) graduate,2009 pass out.I'm searching for a job but b'cos of 2 years of gap i'm not getting so i want to do course.plz can anybody suggest me that which course is good and has a good scope.

I am ECE passout and currently i am in job as process control engineer,under production operating on plc/scada
environment, I want full plc/scada course and to start carrier in maintenance,i want some more training.
What should I do?

Which is the best institute for pursuing CCNA?

You need to select based on your interest. Money is also an important factor but it is not the most important factor. Job satisfaction is what counts. As part of Software Testing you will be into testing various programs. The Networking job profile is more into the hardware side. Both the profiles are different but the scope for both is similar. So you need to decide whether you are interested in software or the hardware side. Also select a firm where you feel there is growth in terms in career and also job satisfaction. Another way in which you can decide is based on which subject you performed well during your studies.

friend,

Both the jobs are good and This can be your turning point in your life if you select the best among
them so just think about your career interest and skills and knowledge and then choose the best among them for yourself.

In my point of view in software testing you will not be given softwares to develop ,you will check them
that they are working correctly or not and is there any need of change in sofware quality.You will debug the errors.

And in networking you will be involved in transmission of packets and it can be an interesting job.
so just thick about you interests and go for the one which you think is best for you.

i passed ECE engineering could automation field is good for me

hi sir...i want to intrested in job like isro r nasa..
so after the b.tech wt i do for my goal....

sir, maine abhi B.TECH complete kiya hai electronics & communication se. sir mujhe kuch samjh nahi aa raha mai kya karu . mera man automation engineering ka coarse karne man kar raha hai kya ye better hai sofcon Training institute se.
plz help me.

vinit.

Dear friend,

Now a days VLSI is a new technology in the field of electronics for ECE students.
It is fabricate the chips and ICs in a very compact manner in the automobile engineering.

There are many job opportunities for this field ,company usually take candidates from the electronics field and also supply handsome salary packages to the employers working under this field.

Now as far as your query is concern ,then i have to say that your graduation percentage is less ,but dont worry you definately get a good job in automobile sector.

All the best.......................

SIR i am ece 3rd year student and tell me on which side i shouid do training ( PLC OR CCN)

Originally Posted by Unregistered

sir, maine abhi B.TECH complete kiya hai electronics & communication se. sir mujhe kuch samjh nahi aa raha mai kya karu . mera man automation engineering ka coarse karne man kar raha hai kya ye better hai sofcon Training institute se.
plz help me.

vinit.

nhi sofcon frzi h ,ye job 4 se 6 hazar ki lagate h , . . Networking best h . . Meine sofcon se plc kiya h. . Or ab unemployed hu

hi
pls tell me, is automation training beneficial or not for girls?
i m from electronics and instrumentation branch with 67% (2012 batch) and want to pursue my carrier in core field. i got a job in wipro bpo as technical support associate bt i m nt interested. should i join wipro??
pls help me

sir i had compltd my diploma in extc branch.......n nw m dng my btech from karnatka state open university........n i had join industrial automation training..........is this beneficial for meee?//////////plz suggest meee guys...............

Hi...i finished my B.Tech in mechanical engineering..
what is the scope for me if i do a CERTIFIED AUTOMATION ENGINEER..the topics covered are PLC , SCADA,VFD, MMI, PNEUMATICS ...will dis b useful for me to get placed in some good core companies???

Hi dear,

Its future is really very very bright,through this stream you can go various sectors in higher study such as :

1:Research(ISRO),
2:Mobile Communication,
3:Microwave Communication
4:Robotics, defense,
5:Radio Communication,
6:TV broadcasting,
7:Telegraphy & Telephony,
8:VLSI design,
9:Nuclear Science,
10:Wireless Communication etc.....


If you have to do the short term courses than you can complete any of he following courses:
1:course on VLSI Design .
2:course on PLC
3:course on PLC & SCADA
4:course on Networking
5:course on Embedded System
6:course on FPGA, ASIC design etc.....

After the all completion of the course there are so many option for job in Govt as well as Private sectors.
some current jobs are as follows:
1irectorate General Border Security Force (BSF)
Communicational Diroctrate(OT Technician) Age Brah20-25yr.
Pay scale Rs. 5,200/- to 20,200/-

2:Brah-Mos Aerospace,new Delhi (Deputy designer)

3:Brah-Mos Aerospace,Hyderabad ,Nagpur (Deputy designer)

4:Bharat Electronics Limited(BEL)

5:Bharat Sanchar Nigam Limited(BSNL)

for all other details jobs visit:http://beta.freshersworld.com/jobs

For details visit:http://sarkari-naukri.blogspot.com/

Beside those jobs there are another jobs such as :
1:Capita Technology

2:Cafe Galilee

3:Pcs Security Pte Ltd

4:Ar Transportation

5:Roots Communications Pte Ltd etc...

for details visit:http://www.streetdirectory.com/jobs/singapore/industry/sub_cat/27/engineering/17/telecommunication__wireless__radio/

in general the salary starts can get anywhere between Rs. 20,000/- to Rs.35,000/- per month .

Thanks

my name is dheeraj sharma.i have just completed b-tech from gbtu with aggregate 64%.i want to make career in automation industry plz help me.

i am ECE fourth year student.I am interesting in automation , i want to know , what is the best automation fields for carrier job
for me . and i am like machnaries automation for product producer

ankiAKNMEC FOUNDATION

Please tell the best training institute in Delhi NCR for PLC Automation

dear i am complte my b.tech in ece in 2012.
now i am confuse which short term cource is better for me from embede or automation.......
sir plz help......

Hello sir,
I am 2011 ECE passout and recently quit my 8 months tech support job in IBM as i did not like that work
Now i am getting job in automation company which deals with PLC,SCADA,DRIVES etc and is system integrator for Schneider Electric but salary they are offering is less as im fresher with 2-3 yrs bond.....just wanted to know is it worth to chose it in less package and is future prospects bright for this field and is it good to compromise on salary right now....im concerned plz help me...

please any one having idea about what actually happens in an automation industry plz help me to understand as i am ece fresher willing to work in an industry where growth is possible plz inform me at my id [email protected]

what is the scope of the automation for BE(ECE)

which is the best automation institute in noida.

Is sofcon training good to go for automation or prolific in pune ?

I am persuing b.tech in ECE. Which course is best for me for my 6 month industrial training.
My email : [email protected]

sir what will be the starting salary in automation industry

i've completed B.Tech in (ECE) also done industrial automation course from SMEC automation , buddies trust me its total waist ............still after 1year of passing out still haven't got any job.......pls don't try and waist ur life,,, all companies in industrial automation would take only experienced guys only,,as plc costs a fortune and no company would risk in taking a fresher for doing any plc or scada progg... TRUST ME .........do an enquiry and then make ur choice......

suggest me any job opening for autoamtion engineer as a fresher
pls do the needful

i am a student in the final semester of electrical and electronics engineering with 74% aggregate upto 7th sem. what are my chances of getting placed in core companies if i go for automationb courses, plc scada or other similar courses? what are the courses relevant to my branch? kindly guide me through.

Sir i am pursuing b.tech (6th sem.) with ece stream. Now i have 45 to 60 days for training. So i have decided to go for vlsi design. Please suggest me best institutes for it. Also i will go for embedded for 6 mnths in 8th sem. Does vlsi and embedded will be best courses for core companies ?

i m a employee from an ABB system integrator in noida,from my point of view automation is nice but u need some patience to succeded in this field. kindly note : if market get down industrial automation will suffer severely when compare to other sector ,&also u cant expect more salary in this field....

i am B.tec ece pass out in 2013 , i would like do short term course in our core suject which course is more suitable for me
Plz reply

I have completed my btech in ece and as iam hardworking n flexible but confuse which field to select telecom or networking? So that I get good scope, fast growth and high salary in future.