Education and Career Forum

hi
i need L&T apptitude papers if anyone having it in pdf format plz upload it coz i'm founding difficulty in founding them

Originally Posted by sunitce

hi
i need L&T apptitude papers if anyone having it in pdf format plz upload it coz i'm founding difficulty in founding them

Dear friend i am sending some question but you can also downloaded all company question from this website...........


1. There are seventy clerks working in a company, of which 30 are females. Also, 30 clerks are married; 24 clerks are above 25 years of age; 19 married clerks are above 25 years, of which 7 are males; 12 males are above 25 years of age; and 15 males are married. How many bachelor girls are there and how many of these are above 25?

2. A man sailed off from the North Pole. After covering 2,000 miles in one direction he turned West, sailed 2,000 miles, turned North and sailed ahead another 2,000 miles till he met his friend. How far was he from the North Pole and in what direction?

3. Here is a series of comments on the ages of three persons J, R, S by themselves.

S : The difference between R’s age and mine is three years.
J : R is the youngest.
R : Either I am 24 years old or J 25 or S 26.
J : All are above 24 years of age.
S : I am the eldest if and only if R is not the youngest.
R : S is elder to me.
J : I am the eldest
R : S is not 27 years old.
S : The sum of my age and J’s is two more than twice R’s age.
One of the three had been telling a lie throughout whereas others had spoken the truth. Determine the ages of S,J,R.

4. In a group of five people, what is the probability of finding two persons with the same month of birth?

5. A father and his son go out for a ‘walk-and-run’ every morning around a track formed by an equilateral triangle. The father’s walking speed is 2 mph and his running speed is 5 mph. The son’s walking and running speeds are twice that of his father. Both start together from one apex of the triangle, the son going clockwise and the father anti-clockwise. Initially the father runs and the son walks for a certain period of time. Thereafter, as soon as the father starts walking, the son starts running. Both complete the course in 45 minutes. For how long does the father run? Where do the two cross each other?

6. The Director of Medical Services was on his annual visit to the ENT Hospital. While going through the out patients’ records he came across the following data for a particular day : ” Ear consultations 45; Nose 50; Throat 70; Ear and Nose 30; Nose and Throat 20; Ear and Throat 30; Ear, Nose and Throat 10; Total patients 100.” Then he came to the conclusion that the records were bogus. Was he right?

7. Amongst Ram, Sham and Gobind are a doctor, a lawyer and a police officer. They are married to Radha, Gita and Sita (not in order). Each of the wives have a profession. Gobind’s wife is an artist. Ram is not married to Gita. The lawyer’s wife is a teacher. Radha is married to the police officer. Sita is an expert cook. Who’s who?

8. What should come next?
1, 2, 4, 10, 16, 40, 64,
Questions 9-12 are based on the following : Three adults – Roberto, Sarah and Vicky – will be traveling in a van with five children – Freddy, Hillary, Jonathan, Lupe, and Marta. The van has a driver’s seat and one passenger seat in the front, and two benches behind the front seats, one beach behind the other. Each bench has room for exactly three people. Everyone must sit in a seat or on a bench, and seating is subject to the following restrictions: An adult must sit on each bench. Either Roberto or Sarah must sit in the driver’s seat. Jonathan must sit immediately beside Marta.

9. Of the following, who can sit in the front passenger seat ?
(a) Jonathan (b) Lupe (c) Roberto (d) Sarah (e) Vicky

10. Which of the following groups of three can sit together on a bench?
(a) Freddy, Jonathan and Marta (b) Freddy, Jonathan and Vicky
(c) Freddy, Sarah and Vicky (d) Hillary, Lupe and Sarah
(e) Lupe, Marta and Roberto

11. If Freddy sits immediately beside Vicky, which of the following cannot be true ?
a. Jonathan sits immediately beside Sarah
b. Lupe sits immediately beside Vicky
c. Hillary sits in the front passenger seat
d. Freddy sits on the same bench as Hillary
e. Hillary sits on the same bench as Roberto

12. If Sarah sits on a bench that is behind where Jonathan is sitting, which of the following must be true ?
a. Hillary sits in a seat or on a bench that is in front of where Marta is sitting
b. Lupe sits in a seat or on a bench that is in front of where Freddy is sitting
c. Freddy sits on the same bench as Hillary
d. Lupe sits on the same bench as Sarah
e. Marta sits on the same bench as Vicky

13. Make six squares of the same size using twelve match-sticks. (Hint : You will need an adhesive to arrange the required figure)

14. A farmer has two rectangular fields. The larger field has twice the length and 4 times the width of the smaller field. If the smaller field has area K, then the are of the larger field is greater than the area of the smaller field by what amount?
(a) 6K (b) 8K (c) 12K (d) 7K

15. Nine equal circles are enclosed in a square whose area is 36sq units. Find the area of each circle.

16. There are 9 cards. Arrange them in a 3*3 matrix. Cards are of 4 colors. They are red, yellow, blue, green. Conditions for arrangement: one red card must be in first row or second row. 2 green cards should be in 3rd column. Yellow cards must be in the 3 corners only. Two blue cards must be in the 2nd row. At least one green card in each row.

17. Is z less than w? z and w are real numbers.
(I) z2 = 25
(II) w = 9
To answer the question,
a) Either I or II is sufficient
b) Both I and II are sufficient but neither of them is alone sufficient
c) I & II are sufficient
d) Both are not sufficient

18. A speaks truth 70% of the time; B speaks truth 80% of the time. What is the probability that both are contradicting each other?

19. In a family 7 children don’t eat spinach, 6 don’t eat carrot, 5 don’t eat beans, 4 don’t eat spinach & carrots, 3 don’t eat carrot & beans, 2 don’t eat beans & spinach. One doesn’t eat all 3. Find the no. of children.

20. Anna, Bena, Catherina and Diana are at their monthly business meeting. Their occupations are author, biologist, chemist and doctor, but not necessarily in that order. Diana just told the neighbour, who is a biologist that Catherine was on her way with doughnuts. Anna is sitting across from the doctor and next to the chemist. The doctor was thinking that Bena was a good name for parent’s to choose, but didn’t say anything. What is each person’s occupation?

Aptitude Question Papers of L&T With Answers:

Qs. 1-5. In each of the questions below are given two statements followed by two conclusions numbered I and II. You have to take the given statements to be true even if they seem to be at variance from commonly known facts. Read all the conclusions and then decide which of the given conclusion logically follows from the given statements disregarding commonly known facts. Give answer:
(1) if only Conclusion I follows.
(2) if only Conclusion II follows.
(3) if either Conclusion I or II follows.
(4) if neither Conclusion I nor II follows.
(5) if both Conclusion I and II follow.

Statements:

1. Some trucks are houses. Some houses are trains
Conclusions:

I. Some trains are trucks.
II. No train is truck.
Statements:

2. All flowers are trees. All trees are fruits.
Conclusions:

I. Some fruits are flowers.
II. All flowers are fruits.
Statements:

3. Some kites are threads. No thread is needle.
Conclusions:

I. Some kites are needles.
II. No needle is thread.
Statements:

4. All chairs are buildings. All tables are buildings.
Conclusions:
I. Some chairs are tables.
II. Some tables are chairs.
Statements:

5. Some books are pens. All pens are papers.
Conclusions:

I. Some papers are books.
II. All books are papers.
Statements:

6. The difference between th of th of a number and th of th of the same number is 9. What is the number?

1) 45
2) 35
3) 40
4) 30
5) None of these

7. What is the area of a circle with the circumference of 88cms?

1) 618sq cms
2) 516sq cms
3) 600sq cms
4) 615sq cms
5) None of these

8. A student scores 55% marks in 8 papers of 100 marks each. He scores 15% of his total marks in English. How much does he score in English?

1) 55
2) 66
3) 77
4) 44
5) None of these

9. What should come in place of the question-mark (?) in the following number series?
5690 5121 4552 3983 3414 2845?

1) 2276
2) 2516
3) 2746
4) 2356
5) None of these

10. Car ‘X’ covers a distance of 385 kms in 7 hours and car ‘Y’ covers a distance of 715 kms in 13 hrs. What is the difference in the speed of the two cars?

1) 2kms/hr
2) 1km/hr
3) 3kms/hr
4) 5kms/hr
5) None of these

11. The ratio of the present ages of Sunita and vinita is 4:5. Six years hence the ratio of their ages will be 14:17. What will be the ratio of their ages 12 years hence?

1) 15:19
2) 13:15
3) 16:19
4) 17:19
5) None of these

12. Find out the greatest possible number for which 30% of that number is less than 100?

1) 331
2) 335
3) 325
4) 333
5) 328

13. ‘a’ is greater than ‘b’ by 2 and ‘b’ is greater than ‘c’ by 10.
If a + b + c = 130, then (b +c) – a = ?

1) 38
2) 42
3) 44
4) 34
5) None of these

14. Mr Sharma takes loan of Rs 25,000 and repays an amount of Rs 31,000 at the end of 2 years. What is the rate of simple interest at which repays the loan?

1) 8 p.c.p.a.
2) 6 p.c.p.a.
3) 12 p.c.p.a.
4) 9 p.c.p.a.
5) None of these

15. If 11 is subtracted from 15 and the difference is multiplied by 504, what will be the number?

1) 2024
2) 2104
3) 2004
4) 2014
5) None of these

16. The product of two successive positive integers is 462. Which is the smaller integer?

1) 20
2) 22
3) 21
4) 23
5) None of these



17. Each child from a certain school can make 5 items of handicraft in a day. If 1125 handicraft items are to be displayed in an exhibition then in how many days can 25 children make these items?

1) 6 days
2) 9 days
3) 8 days
4) 7 days
5) None of these

18. The owner of a furniture shop charges his customers 15% more than the cost price. If a customer paid Rs 9,039 for a sofa set, then what is the cost price of the sofa set?

1) Rs 7,680
2) Rs 7,860
3) Rs 7,880
4) Rs 7,660
5) None of these

19. While withdrawing an amount of Rs 49,350 a customer by mistake collects Rs 48,150. The remaining amount is deposited back to his account by the bank, which shows the balance of Rs 25,376. What will be the customer’s balance after depositing the remaining amount?

1) Rs 26,576
2) Rs 26,676
3) Rs 26,586
4) Rs 26,686
5) None of these


20. 20% of the total cost of a plot with an area of 395sqft is Rs 78,210. What is the rate of per sq ft of the plot?

1) Rs 1,020
2) Rs 999
3) Rs 1,000
4) Rs 995
5) None of these



Answers:

1. (3)
2. (5)
3. (2)
4. (4)
5. (1)
6. (3)
7. (5)
8. (2)
9. (1)
10. (5)
11. (3)
12. (4)
13. (4)
14. (3)
15. (3)
16. (3)
17. (2)
18. (2)
19. (1)
20. (5)

The aptitude papers for L&T INFO-TECH can be found in the link below.

http://fw.freshersworld.com/placementweek/company.asp?cid=64

and for L&T ECC can be found in the link below

http://fw.freshersworld.com/placementweek/company.asp?cid=417

Here you will find all previous years aptitude papers of L&T

http://fw.freshersworld.com/placementweek/company.asp?cid=417

The last 5 years papers of L&T can be found here in the link below.

http://fw.freshersworld.com/placementweek/company.asp?cid=417

The selection process of L&T in quite easy, you just need to do right things at the right time.
ALL THE BEST for your Placements.

The last 5 years papers of L&T can be found here in the link below.

http://fw.freshersworld.com/placementweek/company.asp?cid=417

The selection process of L&T in quite easy, you just need to do right things at the right time.
ALL THE BEST for your Placements.

hi...
L&T (ECC) Placement Paper Pattern
Last Updated on Friday, 16 May 2008 10:01 Written by Editor Friday, 16 May 2008 09:59
Here is the L&T ECC Placement Paper:
SECTION-1
Mechanical aptitude
SET 1:
1. Stroboscope is used for measuring?
A. rpm of the spur gear.
B. temprature calibration.
C. velocity of the reciprocating engine.
d. All the above.
e. None of the above.
2. Pneumatic pressure for industrial application?
3. Lathe bed is made of CI because?
4. Carbon is added to steel-to increase hardness
5. Guideways are hardened by which hardening method?
6. Carbon is added to engine parts to enhance——– property.
7. A metal has K temp gradient and 2K for another metal. If a hot fluid is passed through a pipe
the pipe should be made up of
a. K inside, 2K outside.
b. 2K inside, K outside.
c. Any of the above.
d. None of the above.
8. Crowning of pulley is done for?
9. If temp increases viscosity of gas &liquid
10. Shear angle in press tool -to avoid burr, easy shear.
11. Hardening of shear face in press tool is to
12. Blank size is equal to size of punch in presswork.
13. Bending moment diagram for a UDL in cantilever beam.
a. Parabola.
b. Triangle.
c. Rectangle.
14. for uniform strength of beam condition req.
a) Depth constant, width increases.
b) Depth increases, width decreases.
c) Both should be increases.
d) All the above.
e) None of the above.
15. M33*2 bolt size refers
16. For this bolt and nut arrangement what type is suitable
a.M6-6nos b.M8-4nos c.M10-2nos d.M12-1 .
17. Rupture stress is
18. If two springs of stiffness K1&K2is in series the equivalent stiffness is
19. Find out odd
a. Oxy-acety
b. Plasma arc
c. Electron beam
d. USM
20.butt welding
.
21.Welding employed for plastics
22.core prints
23.if carbon is added to petrol what happen
24.While machiningdoes not require lubricant.
25.Dirty filter is changed in to cleaner filter What will happen to the air fuel ratio –in the case of
carburetor.
26.internal keyway is machined by
27.Aircraft blades are produced by
a. Casting
b. Stretch forming
c. Forging
d. Bending.
28.when water hammer occurs in the case of welding?why?
29.No of cranks used in 6 cylinder engine
30.Which grade of CI has most shock absorbing and damping capacity
31.damper is a vibration (dissipater).
32.Piezometer is used to measure
a)static pressure
b)total pressure
c)discharge]
33.which of the following is not a fusion welding
a) spot welding.
b) arc welding.
c) Electron beam welding
34.besides any thickness 2 metals of different materials can be butt welded by
a) by adjusting the initial gap.
b) By adjusting the current,voltage.
c) By adjusting the time of welding.
35.when pulley dia is doubled ,width is kept constant , tension is kept constant key size should be
a) Doubled in length.
b) Doubled in depth.
c) Both twice.
36.thermoplastics can be molded by
a) Vacuum molding
b) Compression molding
c) Injection molding
37.A ……..WEIGHT AT SLOPE
B—— WEIGHT THAT IS HANGING
FOR EQUILIBRIUM
a) A comes down
b) B comes down
c) A&B oscillates.
d) Remains at same.
38) Which load is safe for beam—————
a) Point load.
b) UDL locally.
c) UDL fully.
d) UVL.
39) For diesel engine which ratio is high?
a) Compression ratio.
b) Expansion ratio.
40) Washers are used for providing(bearing area).
41) Which has no differential(train).
42) Constituents of brass (alloy of copper and zinc).
43) Worm And worm wheels are used for— higher reduction.
44) Why in a condenser the pressure drops below vaccum turbine is tripped off(choice:c)
45) Fits will be based on –clerance between mating surface.
46)path traced by water particle flowing from an opening on the bottom of the container is ——
Parabolic.
SET 2:
1) The path of jet discharging from bottom opening in a tank of water (parabola with its vertex at
opening)
2)water hammer in pipes occur due to(heavy pressurisation of pipe)
3)specific speed of a pump(delivers unit discharge at unit head)
4)for small discharge at high pressure(reciprocating pump is preferred)
5)ultimate tensile stress of mild steel compared to ultimate compressive stress is(more)
6)rupture stress(load at breaking point/neck area)
7)moment diagram for cantilever beam carrying uniformly distributed load will be(parabolic)
8)moment of inertia of an area is always least with respect to(centroidal axis)
9)crowning on pulleys help(for automatic adjustment of belt position so that belt runs centrally)
10)mitre gears are same as (right angled bevel gears having same no.of teeth)
11)stress concentration is caused due to((d)all of above)
12)function of washer is(provide bearing area)
13)M33×2(metric threads of33mm O.D and 2mm pitch)
14)key used between shaft and pulley is made from(cold rolled mild steel bars)
15)hardness of steel depends on(shape7distribution of carbides in iron)
16)carbon steel is(an alloy of iron and carbon with varying quantities of Phosphorous&sulphur)
17)hardening of Machine tool guideways by(flame hardening)
18)carriage and tailstock are placed in(different guideways)
19)In welding,arc is too long due to(formation of globules in irregular pattern becoz of
wandering of arc)
20)acetylene is stored in(liquid form)
21)purpose of riser is to(help feed casting until all solidification takes place)
22)core prints are used to(form set to support&hold core in place)
23)unlike materials as well as materials of different thickness can be butt welded by(control of
presure&current)
24)galvanising is(process of coating of zn by hot dipping)
25)size of shaper is specified by(length of stroke)
26)hardness of wheel(or)grade of wheel refers to(strength of bond of wheel)
27)for grinding harder materials(softer grade is used)
28)dielectric medium in EDM is(kerosene)
29)electroplating requires(1)ac,2)dc,3)high frequency ac)
30)no cutting fluid is used in machining (C.I)
31)use of gap(snap)gauge
32)9.81 kgf=?newton
33)general gas eqn is(pv=mRT)
34)carnot cycle has max. efficiency for(reversible engine)
35)fuel-air ratio in a petrol engine fitted with suction carburettor,operating with dirty air filter as
compared to clean filter will be(higher)
36)In S.I engines ,air fuel ratio for idling speed is(1)lean,2)rich…)
37)use of piezometer
38)specific heat values for solid&liquid(one)
39)most ductile metal is(1)gold 2)steel 30C.I 4)Al)
40)aeroplane wings are made of
41)adv.of projection welding over spot welding
42)electrodes of resistance welding are made of(high strength&high conductivity)
43)AIRCRAFT GASTURBINE is made of(timken,haste&inconelalloys)
44)when a spring is cut into two,stiffness becomes
45)shear angle given in punch during piercing or punching operation is due to
46)worm gears used for(1)low redn speed 2)high rednspeed…)
47)helical gears are used(for noise redn)
48)mirror(image) is due to
49)hardest cutting tool material is(tungsten carbide)
50)fit is reqd due to(clearance between two mating parts)
51)damper is used for
52)Thickness(t=0.5cm)shear dis=7cm & tensiles tress=400kg/sq.cm find force reqd in punch?
SET 3:
1. Why CI is used for most m/c tools (dampening).
2. Which of the following does not require cooling medium (CI).
3. Among the following which is most used for vibration and dampening (GCI).
4. Which gear has no axial thrust (herring borne)?
5. Which has no differential (train).
6. When C is deposited on engine piston, what happens?
7. Constituents of brass (alloy of copper and zinc).
8. In a sheet metal blanking process the dia of the blank is equal to —–(dia of punch).
9. Fits will be based on (clearance bet mating parts).
10. C is added to a material why (to increase hardness).
11. Why in a condenser the pressure drops below vacuum turbine is tripped off (choice c).
12. Washers are used for providing (bearing area).
13. Constant enthalpy process (throttling).
14. Hardness of steel depends on (carbon).
15. If two springs of stiffness k1 and K2 is in series the equivalent stiffness is (k1+k2/k1k2).
16. Which one will have uniform strength (choice a) width same depth varying. b) Depth
same width varying. c) Width and depth vary proportionally. D) Any of the above. E) None of
the above.
17. In a simple row 6 cylinder radial engine how many cranks will be there (1).
18. In which of the following work done is zero (all the above).
19. How internal keyway is made (broaching).
20. Screw threads are made (rolling).
21. In which instrument more measure is taken (outside micrometer).
22. Most common pressure range used for industrial applications (5 to 10 bar).
23. Worm gears are used for (high reduction ratios).
24. Ni is added to CI to increase …(toughness).
SECTION 2
Mechanical comprehension
Basically 4 types
1) asked to find the gear direction of rotation given the driver rotation
2) Minimum effort to lift the load given different types of mechanisms
3) Speed of the gear rotation
4) Water flowing from a channel
All were diagrammatic.
8-10 questions from pulleys, gears, and shafts.
SECTION 3
Non-verbal reasoning
These were for picture puzzles:
This part is the easiest of all. You can easily solve it in less than 30 minutes. Certain sequence of
8 pictures will be given and u will be asked to find the 9th one, u will have 8 choices.
You can easily solve the first 20-25 questions and others are little difficult.
GD topics:
1. Should Mangers Be Good Technical Personnel?
2. Indian Technical Professionals Wish To Merely Set Up A Career Abroad.
3. Are Indians Less Quality Conscious?
4. Brain drain.

Pl. find the attached word document consisting of list of papers.

Moreover, for verbal & non-verbal reasoning questions kindly refer 9th chapter by R. S. Agrawal. As the pattern is mostly observed to be of such type in the first round of written exam.

i need aptitude for neyveli lignite corporation related to staff nurse.

Dear,
According to me -
The last 5 years papers of L&T can be found here in the link below.

http://fw.freshersworld.com/placementweek/company.asp?cid=417

The selection process of L&T in quite easy, you just need to do right things at the right time.
Thanks.
All the best.

Amongst Ram, Sham and Gobind are a doctor, a lawyer and a police officer. They are married to Radha, Gita and Sita (not in order). Each of the wives have a profession. Gobind%u2019s wife is an artist. Ram is not married to Gita. The lawyer%u2019s wife is a teacher. Radha is married to the police officer. Sita is an expert cook. Who%u2019s who?

my BE average is above 65 and 12 percentage is62% and 10% is 59.2 weather iam eligible for L&T and HEXAWARE or not

is t easy to enter L&T

plz mail me L&T ECC papers .plzzzzz

plz send the l&t ecc papers for my email

Originally Posted by sunitce

hi
i need L&T apptitude papers if anyone having it in pdf format plz upload it coz i'm founding difficulty in founding them

Dear friend,

I have attached some valuable placement paper.

Please check it out.

This paper are really helpful for you

Thanks

please send me last year question paper of recruitment of computer teacher.
please send as soon as possible

i want techical papers of l&t infotech ....quick uploaded it..i prepare for campus ...thank u...

plz send me l&t ecc papers.

plz send l and t aptitude test papers for 2010 ,2011 2012

can some one provide LNT ecc placement papers for MBA grads

this paper is of tcs? r u sure it is of lnt

Originally Posted by sunitce

hi
i need L&T apptitude papers if anyone having it in pdf format plz upload it coz i'm founding difficulty in founding them

L&T Aptitude Test Papers

Larsen and Tubro(L&T) besides being the most prominent name in the Civil and Mechanical line..also recruits candidates in the IT field..

The company is worth a whooping $13.5 billion and deals in construction, services, technology, engineering, manufacturing,etc..

I have attached a few previous year question papers of L&T along with this post for your reference..

Go through them and I hope they will help you out in your preparations..

Also go through the interview experiences shared by various candidates..

Click Here for more info on the company..

There are 2 rounds :-

>> Written Exam based on engineering aptitude
>> Technical Interview

all the best..

With Warm Regards
Nitz

plz send the l&t ecc 2013 papers for my email [email protected],,

plz send the l&t mechanical app technical papers

here is a pdf which contains a[titude paper of L&T.

Plz send mi account dept placement papers for L&T.....its on prioriy

k,we will send you,but first of all you go through all concept of appitude