Education and Career Forum

Hi frdz, im an electrical engineer. im out of field for past three years. I need to know a short term course to relish my knowledge and could place in employment. plz help!

dear friends,

nows these days there is very good demands of the electrical engineers.

and also there is many short term courses for the electrical engineers,

so you can go for the courses like embeded system/plc/mat lab/pice...

appart from this you can do software course.

Hello,
I will suggest you to do course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.

It is fact that i have seen lots of professionals,even the experienced ones going for this course.

As you have been working in fields not relevant to your branch,so it will be better to take the initiative.

As you not mentioned your place or else i would have given the details of some of this institutes.

ITS BETTER LATE THAN NEVER.

dear sir,
plz give the details of some institutes in kolkata who conduct plc dcs course

Dear Sir,
Thankyou for your kind information.i had completed my diploma EEE in 2002.But i had no chance till to work in related fields.I m working in NGO as programme coordinator .Is it possible to get job after completing AUTOMATION course.Also Plz give reference for Automation courses in bangalore.Plz give details.Again thank u very much
Mahadevan.K
Bangalore

dear sir.
can you please give me the details about online short time courses for electrical engineering..i am a 3 rd year student..
parijat
west bengal

Dear sir,
I Completed BE in electrical & electronics in 2008, since i m working as electrical site engineer, i want to change my stream, please suggest me which course i should
do,i want to do in bangalore preferably, plz send reply to my id: [email protected]

Dear sir,
Please tell me about the short term courses available in Electrical Engineering.I am doing my 3rd year EEE in Tamilnadu,
plz send replt to my id:[email protected]

Dear,
Hi,
I will suggest you to do course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.
It is fact that i have seen lots of professionals,even the experienced ones going for this course.
As you have been working in fields not relevant to your branch,so it will be better to take the initiative.
As you not mentioned your place or else i would have given the details of some of this institutes.

Thanks.

dear sir,
I am ashok. Please tell me about the short term courses in Electrical Engineering.
I completed my b.tech in Andhra Pradesh and i have above 60%.please give me a list about
how many courses are their in electrical engineering and tell me among the courses, which courses are better to get job.
sir please send the answer to my mail [email protected]

i am k.pavankumar studying in btech 3rd year in andhrapradesh i want to do courses like winding,wiring etc plz tell me about respective courses.i didnot find any such institutes wich offer these courses ,so plz plz mail me as quick as you can to [email protected]

i m niten and i want to know practical trainning about electrical field on any type power plant with 2 back and 64 %
is there any institute for me????? plzzzz suggest me......

[email protected]

sir,
i completed my B.tech in Electrical and Electronics engineering in 2011 with 59.68% of aggregate so i never going to get a chance to do a software job so please suggest me to a hardware short term course in electrical engineering sector in a good and better institute in Hyderabad. please reply to my email address i.e,"[email protected]".

I am praveen,i complete my b.tech EEE in andra pradesh with a 56% ,plz tel me after b.tech courses towards railway sream

plz mail me sir,
[email protected]

hi,

I am fresh graduate and i want to know if there are any courses could help me recover what i studied. BTW i am electric engineer

hiii please tell me about short term courses after diploma in electrical n also tell me about the best institution ?

hiii please tell me about short term courses after diploma in electrical n also tell me about the best institution ?

pls give me details of institutes which provides courses like automation,DCS,PLC etc.

Hi,

I want to know the best trainig institute for plc and dcs training.

Hi...
I m Gurdeep, i did my Engineering in Electrical stream in 2003. till then i m out of the field and now i have decided to refresh my memory and would like to join some industry. am not aware what is in Demand these days. So can any one suggest me some new courses or anything related to Electrical engineering which is in demand these days, not only in India but abroad as well...I Shall be very thankful to you...my id is
[email protected]
THx

dear sir i hav completed engineering with 61% marks in EEE and having 68% in class 10th but only 52% in my class 12th....tell me i want to go for softwares, how can i il be eligible and how I should contact the companies??

i completed j.o.c.( job oriented pre-university diploma in electrical wiring&servicing of electrical appliancess) when i join the diploma course can i get any concession because of this course?

Dear,
Hi,
I will suggest you to do course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.
It is fact that i have seen lots of professionals,even the experienced ones going for this course.
As you have been working in fields not relevant to your branch,so it will be better to take the initiative.
As you not mentioned your place or else i would have given the details of some of this institutes.

Thanks.

Originally Posted by Vipin0516

Hi frdz, im an electrical engineer. im out of field for past three years. I need to know a short term course to relish my knowledge and could place in employment. plz help!

Hello friend,

The best short term courses for Electrical branch are:

-Circuit Designing.
-VLSI Testing.
-Scada Communication.
-Filter analysis.
-Networking.
-VLSI Designing.
-Embedded Systems.
-Industrial Automation and control.
-Digital Signal Processing.
-Wireless Communication.
-PLC courses.

The various Core companies for EE are:

-BHEL.
-Reliance.
-Idea.
-BSNL.
-Nokia.
-DRDO.
-ISRO.
-Siemens.
-Toshiba.
-Honeywell India.

These short term courses will help you a lot in getting job in good companies.

all the best.

I completed B.Tech in Electrical and Electronics Engineering. I have 2 year experience in Electrical Maintenance field. Now I am looking for any short term courses for same field or petroleium field (i already done PLC AUTOMATION course). Kindly suggest some short term courses to get a good jobs.

I will suggest you to do course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.

It is fact that i have seen lots of professionals,even the experienced ones going for this course.

As you have been working in fields not relevant to your branch,so it will be better to take the initiative.

As you not mentioned your place or else i would have given the details of some of this institutes.

ITS BETTER LATE THAN NEVER.

The ADVANCED TRAINING INSTITUTE, DASNAGAR, HOWRAH offers many Short term training courses for industrial workers.The duration of these courses is 2 to 6 weeks duration in Advanced Skill areas in order to update the skills of serving industrial workers, technicians and first line supervisors to become specialised in their field of work. At present, the institute offers courses in the following areas-

1.Tool Design,

2.Metrology and Inspection,

3.Machine Tool Maintenance,

4.Microprocessors and Industrial Electronics

5.Advanced Refrigeration & Air-conditioning,

6.Electrical Maintenance & Electronic Control,

7.Advanced Welding,

8.Pneumatic & Hydraulic control

9.Heat Treatment.

For any further details CONTACT ADDRESS -

Director
Advanced Training Institute
Dasnagar : Howrah - 711105
Phone no. 653-1257
653-1225

Fax No- 033-653-1257

do a course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.

i doing my diploma from ptu n plz tel me about these courses

i m in last year diploma in electronics and telecommunication can any one suggest me short time courses
apart from PLC,SCADA,HMI.

i m pursuing BTech in electrical and electronics ,i want to ask now a days if plc scada is better or embedded system??

i wnt some of the institute name for automation in plc,,,,,dcs etc,,,,,,,,,,,,,,,wich to be located at chennai,,,,,,,,,,or delhi,,,,,,,,,both places,,,,,,,,,,,,,,,,,,,,,,i want good institute name,,,,,,,,,,,,,,,,,,,,,plz reply soon,,,,,,,,,,,,,,,,

Hello,
I will suggest you to do course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.

It is fact that i have seen lots of professionals,even the experienced ones going for this course.

As you have been working in fields not relevant to your branch,so it will be better to take the initiative.

As you not mentioned your place or else i would have given the details of some of this institutes.

ITS BETTER LATE THAN NEVER.
thanks

I have done engineering in electrical and electronics,and passed in 2011. so please suggest me course to get a better job opportunity, either i should go to change my stream or continue with the short term courses in the same field???????
please let me know in my email id:- [email protected]
thanks in advance

dear sir,
I am a diploma holder . I don't want to join in company . I want to join in merchant nave air force something like that
so kindly say me which course is perfect for me

Originally Posted by Vipin0516

Hi frdz, im an electrical engineer. im out of field for past three years. I need to know a short term course to relish my knowledge and could place in employment. plz help!

Masterbate eight times daily.

sir,iam giri ,i completed my b.tech in electrical with 60%.pls suggest which course is prefered one to get core job.

Originally Posted by nagamalleswararaoyaramasu

Dear,
Hi,
I will suggest you to do course on Automation,which includes PLC,DCS(Distributed Control System),Drives etc..Today as most of the manufacturing&production companies have introduced the AUTOMATED system,there is a good demand for Electronics/Electrical/Instrumentation Engineers with good knowledge in PLC & DCS.
It is fact that i have seen lots of professionals,even the experienced ones going for this course.
As you have been working in fields not relevant to your branch,so it will be better to take the initiative.
As you not mentioned your place or else i would have given the details of some of this institutes.

Thanks.

Dear Sir,

My name is Briz, completed BE-EEE in 2011, now working in Bangalore in an Electrical HT & LT Panel Boards & Switchgears Manufacturing firm. Please suggest me the courses and some of the institutes, which offers short term courses related to my profession. My Email Id: [email protected].
Please help me sir.

Thank you,
Briz.

hello, i just want to know if there are any scr control training institutes in bangalore?
I am working as electrician in drilling rig, i want to learn about the scr controls. please help me

proe wildfire and catiav5 are the suiatable courses for electrical students

i have completed diploma in electrical engineering .which courses are suitable after diploma

which course can i do after diploma in electrical engineering?

Hello, can anyone suggest the institutes offering short term courses related to electrical engineering in Bangalore. I'm looking for SCADA, PLC and DCS training. Please inbox to this mail id [email protected]. Looking for your suggestions. Thanks in advance!!

Dear sir my name is ravi i completed b.tech eee 2011 with 64%and icomplted electrical design engineer course upto now i didnt get job give any suggtions what to do please gorward to @ [email protected]