Education and Career Forum

sir ........send me the next jto exam date and how can i get the syllabus for that exam?

hii friend .. JTO (Junior Telecom Officers ) TILL NOW I COULDNT FIND THE DATE OF EXAM IN 2010 WIL SURE SEND YOU SOON FRIEND I HAVE SOME IMPORTANT THINGS ABOUT THE JTO HOPE IT WIL BE USEFUL FOR YOU ...
Bharat Sanchar Nigam Ltd. [BSNL] will recruit about 3945 [subject to variation depending on the availability of vacancies] Junior Telecom Officers through an open competitive examination to be held on 21.06.2009 on All India basis, as per the details given below:-

JTO(Telecom) TOTAL: 3545
JTO(Civil) Total:200
JTO(Electrical) Total:200

Scale of Pay
The post of J.T.O. is in the IDA pay-scale of Rs. 9850-250-14600.
(The pay scale is likely to be revised upwards)

Eligibility
Nationality : Only Indian Nationals would be eligible to apply.
Educational Qualifications:
JTO (Telecom)

Applicant must possess as on 31.12.2009, Bachelor of Engineering/Bachelor of Technology or equivalent Engineering degree in any of the following disciplines from a recognized engineering college/university:
i. Telecommunication,
ii. Electronics,
iii. Radio,
iv. Computer,
v. Electrical.
vi. Information Technology

Candidates appearing in the final year degree examination may also apply provided they possess the required educational qualification by 31.12.2009.
JTO (Civil)

Applicant must possess as on 31.12.2009, Bachelor of Engineering, Bachelor of Technology or equivalent in Civil Engineering from a recognized Institution/University.

Candidates appearing in the final year degree examination may also apply provided they possess the required educational qualification by 31.12.2009
JTO (Electrical)

Applicant must possess as on 31.12.2009, Bachelor of Engineering, Bachelor of Technology or equivalent in Electrical Engineering from a recognized Institution/University.

Candidates appearing in the final year degree examination may also apply provided they possess the required educational qualification by 31.12.2009
Age:

The applicant for JTOs(Telecom), JTOs(Civil) and JTOs(Electrical) should not be more than 30 years of age on the closing date for receipt of applications from candidates. However, this age is relaxable as per standing instructions on this subject for:-

i) Govt. servants upto 5 years in accordance with the instructions or orders issued by the Central Govt.;
ii) BSNL employees upto 5 years in accordance with the instructions or orders issued by the BSNL;
iii) For Scheduled Castes & Scheduled Tribes candidates upto 5 years;
iv) For OBC Candidates upto 3 years;
v) For General Category PH candidates upto 10 years ; (for SC/ST 15 years and for OBC 13 years)
vi) For certain other categories like ex-servicemen, displaced persons from East Pakistan[now Bangladesh], repatriates from Burma and Ceylon [now Srilanka],residents of Goa, Daman & Diu, persons migrated from Kenya, Uganda, Republic of Tanzania as per instructions issued by the Central Government from time to time in this regard.
(vii) For Residents of J&K – Relaxation shall be in accordance with DoP&T’s Notification No.15012/7/1991-Estt.(D) dtd. 7.12.2007 pertaining to “Residents of State of Jammu and Kashmir (Relaxation of Upper Age Limit for Recruitment to Central Civil Services & Posts) Rules 1997”.

Further in respect of apprentices who have undergone apprentice training in BSNL successfully, there will be following provision:-
(a) An apprentice will be required to compete in the common competitive examination conducted by BSNL along with other direct candidates and preference to the apprentices over non-apprentices direct candidates will be given only if apprentices secures equal place in merit in select zone and all other eligibility conditions being equal.
(b) The apprentices would not be required to get her/his name sponsored by any employment exchange.
(c) The apprentices would be entitled to age relaxation to the extent of the period for which the apprentice had undergone training as apprentice in the BSNL.
Mode of selection and nature of Question Paper

The mode of selection is through an All India Competitive Examination. The examination will be of three hours duration with one Question Paper containing the following three sections:-
For JTOs(Telecom)

Section-I : Engineering stream : 50 questions
Section-II : Engineering stream : 50 questions
Section-III : General Ability Test: 20 questions
For JTOs(Electrical)

Section-I : Electrical Engineering stream : 50 questions
Section-II : Electrical Engineering stream : 50 questions
Section-III : General Awareness : 20 questions
For JTOs (Civil)

Section-I : Civil Engineering stream : 50 questions
Section-II : Civil Engineering stream : 50 questions
Section-III : General Ability Test : 20 questions

The Question Paper will be fully objective type with multiple options as answers to each question. The standard of paper in engineering subjects will be that of Engineering Examination of an Indian University.

However, there would be no separate time fixed for attempting the separate sections. Detailed syllabus for JTOs(Telecom), JTOs(Civil) and JTOs(Electrical) appear at Annexures ‘B’ , ‘C’ and ‘D’ respectively.

A final call letter/appointment letter will be issued to the candidate after completion of all other formalities.
BEST OF LUCK
AZHAR

Till now BSNL has not release4d any advertisement for the JTO so keep frequently looking for the recruitment in employment newspaper

hello,
generally the BSNL JTO 2010 notification for exam dates comes in the month of february.so, be alert!

The examination will be of three hours duration with one Question Paper containing the following three sections:-
For JTOs(Telecom)

Section-I : Engineering stream : 50 questions
Section-II : Engineering stream : 50 questions
Section-III : General Ability Test: 20 questions
For JTOs(Electrical)

Section-I : Electrical Engineering stream : 50 questions
Section-II : Electrical Engineering stream : 50 questions
Section-III : General Awareness : 20 questions
For JTOs (Civil)

Section-I : Civil Engineering stream : 50 questions
Section-II : Civil Engineering stream : 50 questions
Section-III : General Ability Test : 20 questions

The Question Paper will be fully objective type with multiple options as answers to each question. The standard of paper in engineering subjects will be that of Engineering Examination of an Indian University.

However, there would be no separate time fixed for attempting the separate sections. Detailed syllabus for JTOs(Telecom), JTOs(Civil) and JTOs(Electrical) appear at Annexures ‘B’ , ‘C’ and ‘D’ respectively

the date has yet decided being on the last week of may.
forms comes inn april.
see at freshersworld

sir plz send information about BSNL JTO only comp. sci & enGG. BRANCH &&&& Aalso requirement for jobes.

Originally Posted by kalaiarun

sir ........send me the next jto exam date and how can i get the syllabus for that exam?

you will got here onJTO(Telecom) TOTAL: 3545
JTO(Civil) Total:200
JTO(Electrical) Total:200

Scale of Pay
The post of J.T.O. is in the IDA pay-scale of Rs. 9850-250-14600.
(The pay scale is likely to be revised upwards)

Eligibility
Nationality : Only Indian Nationals would be eligible to apply.
Educational Qualifications:
JTO (Telecom)

dear friend, the exam of JTO is conducted every year in the month of january.
you can see the criteria in the website www.bsnl.co.in/jto-job

good luck..

dear friend, the exam of JTO is conducted every year in the month of january.
you can see the criteria in the website www.bsnl.co.in/jto-job

good luck..

in which date jto exam conducting next plz give me suggestion

sir,
what date of jto next examination.
plz send the examination date at the this email id [email protected]

sir please send me date and place for jto test.























gcgdgdhdcgdydfydfyufyudfyudghgtddfhjfyufryhfyuhffr ty7rfyudyudydfyududfyufryufryuf

WHEN IS THE JTO 2010 EXAM GOING TO BE HELD ?

when is next jto exam?......where to apply for the exam and how to prepare for the exam..............

when will the JTO exam held in 2010-11 ?

Dear Friend,
For BSNL JTO exam ,this year it has already
been passed so try next year.
For exam it will be always be better
if you visit the below mentioned website:
www.freshersworld.com

dear friend,
i am very sorry to inform you the that the exam for the year 2010.is already over.
and all the procedure is over,
so this time you can approach for it,
so better prepare for the next time,

Hi

The BSNL JTO exam date is not announced yet. So you have to wait for the examination date.

The syllabus for the JTO examination is given under:

Syllabus for BSNL Junior Telecom Officers (JTO) - (Telecom)
SECTION - I : 50 QUESTIONS
1. Materials and components
Structure and properties of Electronic Engineering materials, Conductors, Semiconductors and Insulators, Magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Superconducting materials. Passive components and characteristics, Resistors, Capacitors and Inductors; Ferrites, Quartz crystal, Ceramic resonators, Electromagnetic and Electromechanical components.
2. Physical Electronics, Electron Devices and ICs
Electrons and holes in semiconductors, Carrier Statistics, Mechanics of current flow in a semi-conductor, Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction transistor; Field effect transistors; Power switching devices like SCRs, CTOs, power MOSFETs; Basics of ICs-bipolar, MOS and CMOS types; Basics of Opto Electronics.
3. Network theory
Network analysis techniques: Network theorem, transcient and steady state sinusoidal response, Transmission criteria: delay and rise time Elmore’s and other definition, effect of cascading. Elements of network synthesis.
4. Electromagnetic Theory
Transmission lines: basic theory, standing waves, matching applications, microstrip lines; Basics of waveguides and resonators; Elements of antenna theory.
5. Electronic Measurements and instrumentation
Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working: analog and digital, comparison, characteristics, applications. Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.
6. Power Electronics
Power Semiconductor devices, Thyristor, Power transistor, MOSFETs, Characteristics and operation. AC to DC convertors; 1-Phase and 3-phase DC to DC Convertors.
AC regulators. Thyristor controlled reactors, switched capacitor networks.
Inverters: Single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

SECTION-II: 50 QUESTIONS
1. Analog Electronic Circuits
Transistor biasing and stabilization, Small Signal analysis. Power amplifiers. Frequency response, Wide band techniques, Feedback amplifiers. Tuned amplifiers. Oscillators. Rectifiers and power supplies. Operational Amplifier, other linear integrated circuits and applications. Pulse shaping circuits and waveform generators.
2. Digital Electronic Circuits
Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaugh Map and applications; IC Logic gates and their characteristics; IC logic families: DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic circuits; Half adder, full adder; Digital Compartor; Multiplexer Demultiplexer; ROM and their applications. Flip-flops, R-S, J-K, D and T flip-flops; Different types of counters and registers; waveform generators. A/D and D/A convertors. Semiconductor memories.
3. Control Systems
Transient and steady state response of control systems; Effect of feedback on stability and sensitivity, Root locus techniques; Frequency response analysis. Concepts of gain and phase margins; Constant-M and Constant-N Nichol’s Chart; Approximation of transient response from Constant-N Nichol’s Chart; Approximation of transient response from closed loop frequency response; Design of Control Systems, Compensators; Industrial controllers.
4. Communication systems
Basic information theory: Modulation and detection in analogue and digital systems; Sampling and data reconstruction. Quantization & Coding; Time division and frequency division multiplexing; Equalisation; Optical Communication: in free space & fibre optic; Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite communication.
5. Microwave Engineering
Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circuits, Microstrip circuits, Microwave antennas, Microwave Measurements, MASERS LASERS; Microwave Propogation. Microwave Communication Systems-terrestrial and satellite based.
6. Computer Engineering
Number Systems; Data representation; Programming; Elements of a high level programming language PASCAL/C; use of basic data structures; Fundamentals of computer architecture processor design; Control unit design; Memory organization. I/O System Organization. Personal computers and their typical uses.
7. Microprocessors
Microprocessor architecture - Instruction set and simple assembly language programming. Interfacing for memory and I/O. Applications of Microprocessors in Telecommunications and power system.

GOOD LUCK

HI!

The BSNL JTO notification is generally issued in the month of february.

The eligibility requirements are as follows:

a) Nationality : Only Indian Nationals would be eligible to apply.

b) Educational Qualifications: Applicant must possess Bachelor of Engineering/Bachelor of Technology or equivalent Engineering degree in any of the following disciplines from a recognized engineering college/university:
i. Telecommunication,
ii. Electronics,
iii. Radio,
iv. Computer,
v. Electrical.

c) Age: The applicant should not be more than 30 years of age on the closing date for receipt of applications from candidates. However, this age is relaxable in certain cases.

keep visiting BSNL website for regular updates.

you can download on the following link
www.bsnl.co.in/company/job.........

--------------------------------------------------------------------------------

when is next jto exam?......where to apply for the exam and how to prepare for the exam..............
And when come jto form

I am a student of b-tech in cse . what will be the post of jto which I can apply ?

Originally Posted by parhitoshika

the date has yet decided being on the last week of may.
forms comes inn april.
see at freshersworld

please tell me about form, where will i get?

last date of all form relate to b.s.n.l ?

i am doing engg in e.c.e last year?

I am a final year student of b-tech ECE. when is the next JTO exam.where to apply for the exam and how to prepare for the exam..............
And when come jto form

when is next jto exam?......where to apply for the exam and how to prepare for the exam..............
And when come jto form

dear,
there is not a fixed date per year.
this is only on the basis of vacant posts.
so, you should check employment news paper , and sites related to that one like:-
www.freshersworld.com etc..... from time to time

best wishes

dear friend

i m too late to inform you exam date please try to next year and to know the exam date read newspaper regularly

i do not know which field you interest for BSNL jto

so, i send you syllabus of all branch

*

If you are looking for information about BSNL JTO exam, and searching for JTO previous year question papers, searching for JTO application form download, Then you are at right place, check all information at one place including syllabus for all branches. Good luck.
BSNL JTO Sample Test Paper 2006, BSNL JTO Recruitment Test; Also Check out below link for BSNL JTO Previous year Question Paper - 2008 | Sample Papers and Read complete details about BSNL JTO- 2009 Job. Here is Detailed syllabus for BSNL JTO Exam that will help you prepare for the Exam.

Syllabus for BSNL Junior Telecom Officers (JTO)

TELECOM BRANCH

JTO Telecom SECTION - I

1. Materials and Components

Structure and properties of Electronic Engineering materials, Conductors, Semiconductors and Insulators, Magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Superconducting materials. Passive components and characteristics, Resistors, Capacitors and Inductors; Ferrites, Quartz crystal, Ceramic resonators, Electromagnetic and Electromechanical components.

2. Physical Electronics, Electron Devices and ICs

Electrons and holes in semiconductors, Carrier Statistics, Mechanics of current flow in a semi-conductor, Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction transistor; Field effect transistors; Power switching devices like SCRs, CTOs, power MOSFETs; Basics of ICs-bipolar, MOS and CMOS types; Basics of Opto Electronics.

3. Network Theory

Network analysis techniques: Network theorem, transient and steady state sinusoidal response, Transmission criteria: delay and rise time Elmore's and other definition, effect of cascading. Elements of network synthesis.

4. Electromagnetic Theory

Transmission lines: basic theory, standing waves, matching applications, micro strip lines; Basics of waveguides and resonators; Elements of antenna theory.

5. Electronic Measurements and instrumentation

Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working: analog and digital, comparison, characteristics, applications. Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.

6. Power Electronics

Power Semiconductor devices, Thyristor, Power transistor, MOSFETs, Characteristics and operation. AC to DC convertors; 1-Phase and 3-phase DC to DC Convertors.

AC regulators. Thyristor controlled reactors, switched capacitor networks.

Inverters: Single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

JTO Telecom SECTION - II

1. Analog Electronic Circuits

Transistor biasing and stabilization, Small Signal analysis. Power amplifiers. Frequency response, Wide band techniques, Feedback amplifiers. Tuned amplifiers. Oscillators. Rectifiers and power supplies. Operational Amplifier, other linear integrated circuits and applications. Pulse shaping circuits and waveform generators.

2. Digital Electronic Circuits

Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaugh Map and applications; IC Logic gates and their characteristics; IC logic families: DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic circuits; Half adder, full adder; Digital Compartor; Multiplexer Demultiplexer; ROM and their applications. Flip-flops, R-S, J-K, D and T flip-flops; Different types of counters and registers; waveform generators. A/D and D/A convertors. Semiconductor memories.

3. Control Systems

Transient and steady state response of control systems; Effect of feedback on stability and sensitivity, Root locus techniques; Frequency response analysis. Concepts of gain and phase margins; Constant-M and Constant-N Nichol's Chart; Approximation of transient response from Constant-N Nichol's Chart; Approximation of transient response from closed loop frequency response; Design of Control Systems, Compensators; Industrial controllers.

4. Communication Systems

Basic information theory: Modulation and detection in analogue and digital systems; Sampling and data reconstruction. Quantization & Coding; Time division and frequency division multiplexing; Equalization; Optical Communication: in free space & fibre optic; Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite communication.

5. Microwave Engineering

Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circuits, Microstrip circuits, Microwave antennas, Microwave Measurements, MASERS LASERS; Microwave Propagation. Microwave Communication Systems-terrestrial and satellite based.

6. Computer Engineering

Number Systems; Data representation; Programming; Elements of a high level programming language PASCAL/C; use of basic data structures; Fundamentals of computer architecture processor design; Control unit design; Memory organization. I/O System Organization. Personal computers and their typical uses.

7. Microprocessors

Microprocessor architecture - Instruction set and simple assembly language programming. Interfacing for memory and I/O. Applications of Microprocessors in Telecommunications and power system.

CIVIL BRANCH

JTO Civil SECTION - I

1. Building Material:

Timber: Different types and species of structural timber, density-moisture relationship, strength in different directions, defects, influence of defects on permissible stress, preservation, dry and wet rots, plywood, codal provision for design.

Bricks: Types, Indian standard classification, absorption, saturation factor, strength in masonry, influence of mortar strength and masonary strength.

Cement: Compounds, different types, setting times, strength.

Cement Mortar: Ingredients, proportions, water demands, mortar for plastering and masonry.

Concrete: Importance of W/C ratio, strength, ingredients including admixtures, workability, testing, elasticity, non-destructive testing mix design method.

2. Solid Mechanics

Elastic constants, stress, plane stress, Mohr's circle of stress, strains, plain strain, Mohr's circle of strain, combined stress. Elastic theories of Failure, simple and shear bending, Torsion of circular and rectangular section and simple members.

3. Structural Analysis

Analysis of determinate structures- different methods including graphical methods. Analysis of indeterminate skeletal frames- moment distribution, slope deflection, stiffness and force methods, energy methods. Muller-Breslau principal and application. Plastic analysis of indeterminate beams and simple frames-shape factors.

4. Design of Steel Structures

Principle of working stress method. Design of connections of simple members. Built up sections and frames. Design of Industrial roofs. Principles of ultimate load design. Design of members and frames.

5. Design of Concrete and Masonry Structures

Limit state design for bending, shear, axial compression and combined forces, Codal provisions for slabs, beams, walls and footings. Working stress method of design of R.C. members.

Principles of pre-stressed concrete design, material, method of pre-stressing losses. Design of simple members and determinates structures. Introductions to pre-stressing of indeterminate structures.

Design of brick masonary as per I.S. codes.

6. Construction Practice, Planning and Management

Concreting Equipment:

Weight batcher, Mixer, vibrator, batching plant, concrete pump.

Cranes, hoists, lifting equipment.

Earthwork Equipment:

Power shovel, hoe, dozer, dumper, trailers and tractors, rollers, sheep foot rollers, pumps.

Construction, planning and Management:

Bar chart, linked bar chart, work break down structures, Activity-on-arrow diagrams. Critical path, probabilistic activity durations; Event-based networks.

PERT network: Time-cost study, crashing; Resource allocation.

JTO Civil SECTION - II

1.

(a) Fluid Mechanics, Open Channel, Pipe Flow

Fluid properties, pressure, thrust, Buoyancy, Flow Kinematics, integration, of flow equation, Flow measurement, Relative motion, Moment of momentum, Viscosity, Boundary layer and control, Drag, Lift, Dimensional analysis, Modelling, Cavitations, Flow oscillations, Momentum and Energy principles, in open cannel flow, Flow control, Hydraulic jump, Flow section and properties, Normal flow, Gradually varied flow, Flow development and losses in pipe flows, Measurements, Siphons, Surges and Water hammer, Delivery of Power Pipe networks.

(b) Hydraulic Machines and Hydropower

Centrifugal pumps, performance parameters, scaling, pumps in parallel, Reciprocating pumps, air vessels, performance parameters;

2.

(a) Hydrology:

Hydrological cycle, precipitation and related data analysis, PMP, unit and synthetic hydrographs, Evaporation and transpiration, floods and their management, PMG, Streams and their gauging, .River morphology. Rooting of floods, Capacity of reservoirs.

(b) Water Resources Engineering

Water resources of the globe: Multipurpose uses of Water, Soil Plant water relationships, irrigation systems, water demand assessment, Storage and their yields, ground water yield and well Hydraulics, Water logging, drainage design, Irrigation revenue, Design of rigid boundary canals, Lacy' and Tractive force concepts in canal design, lining of canals; Sediment transport in canals; Non-Overflow and overflow sections of gravity dams and their design, Energy dissipaters and tail water rating, Design of head works, distribution work, falls, cross-drainage work, outlets, River training.

ENVIRONMENT ENGINEERING

3.

(a) Water Supply Engineering

Sources of supply, yield, design of intakes and conductors, Estimation of demand, Water quality standards, Control of water born diseases. Primary and secondary treatment, detailing and maintenance of treatment units. Conveyance and distribution systems of treated water, leakage and control, Rural water supply, Institutional and Industrial water supply.

(b) Waste Water Engineering

Urban rain water disposal, system of sewage collection and disposal, Design of sewers and sewerages systems, pumping, Characteristic of sewage and its treatment, Disposal of products of sewage treatment, stream flow rejuvenation, Institutional and industrial sewage management, plumbing system, Rural and semi-urban sanitation.

(c) Solid Waste Management

Sources, classification, collection and disposal, Design and Management of landfills.

(d) Air and Noise Pollution and Ecology

Sources and effects of air pollution, monitoring of Air pollution, Noise-pollution and standards; Ecological Chain and balance, Environmental assessment.

4.

(a) Soil Mechanics

Properties of soils, classification and interrelationship, Compaction behaviour, method of compaction and their choice, Permeability and seepage, flow nets, Inverter filters, Compressibility and consolidation ,shearing resistance, stresses and failure, SO testing in laboratory and in-situ, Stress path and applications, Earth pressure theories, stress distribution in soil, soil exploration, samplers, load tests ,penetration tests.

(b) Foundation Engineering

Type of foundations, Selection criteria, bearing capacity, settlement, laboratory and field test, Types of piles and their design and layout, Foundations on expansive soils, swelling and it prevention , foundation on swelling soils.

5.

(a) Surveying

Classification of surveys, scales, accuracy, Measurement of distances-direct and indirect methods, optical and electronic devices, Measurement of directions, prismatic compass, local attraction, Theodolites-types Measurement of elevations, Spirit and trigonometric levelling, Relief representation, Contours, Digital elevation modelling concept, Establishment of control by triangulations and traversing measurements and adjustment of observations, computation of coordinates, Field astronomy, concept of global positioning system, Map preparation by plane tabling and by photogrammetry, Remote sensing concepts, map substitutes.

(b) Transportation Engineering

Planning of highway systems, alignment and geometric design, horizontal and vertical curves, grade separation, Materials and construction methods for different surfaces and maintenance, Principles of pavement design, Drainage.

Traffic surveys, intersections, signalling, Mass transit systems, accessibility, networking.

Planning of railway systems, terminology and designs, relating to gauge, track controls, transits, rolling stock, tractive power and track modernization, Maintenance Appurtenant works, Containerisation.

ELECTRICAL BRANCH

JTO Electrical SECTION - I

1. EM Theory

Electric and magnetic fields. Gauss's Law and Amperes Law. Fields in dielectrics, conductors and magnetic materials. Maxwell's equations. Time varying fields. Plane-Wave propagating in dielectric and conducting media. Transmission lines.

2. Electrical Materials

Band Theory, Conductors, Semi-conductors. and Insulators. Superconductivity. Insulators for electrical and electronic applications. Magnetic materials. Ferro and ferri magnetism. Ceramics, Properties and applications. Hall effect and its applications. Special semi conductors.

3. Electrical Circuits

Circuits elements. Kirchoff's Laws. Mesh and nodal analysis. Network Theorems and applications. Natural response and forced response. Transient response and steady state response for arbitrary inputs. Properties of networks in terms of poles and zeros. Transfer function. Resonant circuits. Three phase circuits. Two-port networks. Elements of two-element network synthesis.

4. Measurements and Instrumentation

Units and Standards. Error analysis, measurement of current, Voltage, power, Power-factor and energy. Indicating instruments. Measurement of resistance, inductance, Capacitance and frequency. Bridge measurements. Electronic measuring instruments. Digital Voltmeter and frequency counter. Transducers and their applications to the measurement of non-electrical quantities like temperature, pressure, flow-rate displacement, acceleration, and noise level etc. Data acquisition systems. AID and D/A converters.

5. Control System

Mathematical modelling of physical systems. Block diagrams and signal flow graphs and their reduction. Time domain and frequency domain analysis of linear dynamical system. Errors for different type of inputs and stability criteria for feedback systems. Stability analysis using Routh-Hurwitz array, Nyquist plot and Bode plot. Root locus and Nicols chart and the estimation of gain and phase margin. Basic concepts of compensator design. State variable matrix and its use in system modelling and design. Sampled data system and performance of such a system with the samples in the error channel. Stability of sampled data system. Elements of non-linear control analysis. Control system components, electromechanical, hydraulic, pneumatic components.

JTO Electrical SECTION - II

1. Electrical Machines and Power Transformers

Magnetic Circuits - Analysis and Design of Power transformers. Construction and testing. Equivalent circuits. Losses and efficiency. Regulation. Auto-transformer, 3-phase transformer. Parallel operation.

Basic concepts in rotating machines. EMF, torque, basic machine types. Construction and operation, leakage losses and efficiency.

D.C. Machines. Construction, Excitation methods. Circuit models. Armature reaction and commutation. Characteristics and performance analysis. Generators and motors. Starting and speed control. Testing, Losses and efficiency.

Synchronous Machines. Construction. Circuit model. Operating characteristics and performance analysis. Synchronous reactance. Efficiency. Voltage regulation. Salient-pole machine, Parallel operation. . tiunting. Short circuit transients.

Induction Machines. Construction. Principle of operation. Rotating fields. Characteristics and performance analysis. Determination of circuit model. Circle diagram. Starting and speed control.

Fractional KW motors. Single-phase synchronous and induction motors.

2. Power systems

Types of Power Stations, Hydro, Thermal and Nuclear Stations. Pumped storage plants. Economics and operating factors.

Power transmission lines. Modelling and performance characteristics. Voltage control. Load flow studies. Optimal power system operation. Load frequency control. Symmetrical short circuit analysis. ZBus formulation. Symmetrical Components. Per Unit representation. Fault analysis. Transient and steady-state stability of power systems. Equal area criterion.

Power system Transients. Power system Protection Circuit breakers. Relays. HVDC transmission.

3. Analog and Digital Electronics and Circuits

Semiconductor device physics, PN junctions and transistors, circuit models and parameters, FET, Zener, tunnel, Schottky, photo diodes and their applications, rectifier circuits, voltage regulators and multipliers, switching behavior of diodes and transistors.

Small signal amplifiers, biasing circuits, frequency response and improvement, multistage amplifiers and feed-back amplifiers, D.C.

amplifiers, Oscillators. Large signal amplifiers, coupling methods, push pull amplifiers, operational amplifiers, wave shaping circuits. Multivibrators and flip-flops and their applications. Digital logic gate families, universal gates-combination circuits for arithmetic and logic operational, sequential logic circuits. Counters, registers, RAM and ROMs.

4. Microprocessor

Microprocessor architecture-Instruction set and simple assembly language programming. Interfacing for memory and I/O. Applications of Micro-processors in power system.

5. Communication Systems

Types of modulation; AM, FM and PM. Demodulators. Noise and bandwidth considerations. Digital communication systems. Pulse code modulation and demodulation. Elements of sound and vision broadcasting. Carrier communication. Frequency division and time division multiplexing, Telemetry system in power engineering.

6. Power Electronics

Power Semiconductor devices. Thyristor. Power transistor, GTOs and

MOSFETS. Characteristics and operation. AC to DC Converters; 1phase and 3-phase DC to DC Converters; AC regulators. Thyristor controlled reactors; switched capacitor networks.

Inverters; single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.


have a good day

when will be next jto exam for general.any information pls send my mail id:[email protected]

sir i'm searching for bsnl job .plz send me the application form submission date
&application form, exam date for 2011 notification .
i'm a final tr ece student plz send this detail in following mail id
[email protected].
plzzzzzzzzzzzzzzz

Hai friends....Plz send me the date of commencement of application forms for BSNL JTO 2011........... my mail id is [email protected].

Hello my name is ketki ..... Plz tell me when is the BSNL JTO 2011 exam and where i will get the application form and where it is released? plz send me detail of it at my email id my email id is [email protected]

when is jto exam in 2011>???????????????

when start jto exam?
where exam center?

hi friend
in jto first of all requirements is that u r graduated in electrical trade.
http://www.bsnl.co.in/company/job.htm