Education and Career Forum

I am in a need of ekt model question papers.............i am eagerly waiting for it. And which website i have to surf for it?

dear friend

EKT, engineering knowledge test model question papers are availiable
in the below attcah file, so please get it from there-

ok
all the best.

dear friend EKT is a exam conducted by air force in every year for B.Tech students.
you can see for some more information about EKT in the link
www.freshersworld.com/airforcejob
you can also see the model question attached above .
All the best.

Dear friend ,I am providing some questions of year 2009-2010:

1. Two free parallel wires carrying current in the opposite directions

(a) Attract each other
(b) Repel each other
(c) Do not effect each other
(d) Get rotated to be perpendicular to each other
Ans.(b)
2. All the magnetic materials looses their magnetic property when

(a) Dipped in water
(b) Dipped in oil
(c) Brought near piece of iron
(d) Strongly heated

Ans.(d)
3. Potassium paramagnet is used for

(a) Dechlorination
(b) Improving colour
(c) Reducing acidity
(d) Reducing hardness

Ans.(b)
4. Which of the following material has the highest carbon percentage?

(a) Cast iron
(b) Mild steel
(c) High carbon steel
(d) Stainless steel

Ans.(a)
5. Which of the following paints is most fire resistant

(a) Bituminous paint
(b) Asbestos paint
(c) Aluminum paint
(d) Synthetic paint

Ans.(b)

6. The gas which is mainly responsible for the explosion in sewers is

(a) Methane
(b) Ethane
(c) Ammonia
(d) Carbon- monoxide

Ans.(d)
7. The Wind screen of car made of

(a) Sheet glass
(b) Wired glass
(c) Laminated glass
(d) Flint glass

Ans.(c)
8. Which of the welding process is used for welding of structures?

(a) Gas welding
(b) Fusion welding
(c) Thermic welding
(d) Arc welding

Ans.(d)
9. In a d.c generator, following losses will be minimum

(a) Copper loss
(b) Iron loss
(c) Friction loss
(d) Shunt field copper loss

Ans.(b)
10. Corona loss is less when the shape of the conductor is

(a) Circular
(b) Flat
(c) Oval
(d) Independent of shape

Ans.(a)

11. The core of the transformer is assembled with laminated sheet so as to reduce

(a) Hysteresis loss
(b) Copper loss
(c) Magnetic noise
(d) Eddy current loss

Ans.(d)
12. Which of the following instrument is used for measuring the rate of flow of liquid of pipes

(a) Hydro meter
(b) Venturi meter
(c) Viscometer
(d) Falter pump

Ans.(b)
13. The proper use of lubricants cannot reduce

(a) Static friction
(b) Inertia
(c) Sliding friction
(d) Rolling friction

Ans.(b)
14. Infra red radiation can be detected by

(a) Spectrometer
(b) Pyrometer
(c) Nanometer
(d) Photometer

Ans.(b)
15. Which of the following is used in optical fibers

(a) Total internal reflection
(b) Scattering
(c) Diffraction
(d) Refraction

Ans.(a)

16. Metal attains super- conduction properties below the temperature of

(a) 0 deg K
(b) 100 deg C
(c) 100 deg K
(d) 10 deg K

Ans.(d)
17. Powder clinges to the skin because of following property

(a) Adhesion
(b) Cohesion
(c) Surface tension
(d) Capillary action

Ans.(a)
18. The sparking at the brushes in the d.c generator is attributed to

(a) Quick reversal of current
(b) Reactance voltage
(c) Armature reaction
(d) High resistance of the brushes

Ans.(c)
19. D.C series motor should always be started with load because

(a) At no load it will rotate at dangerously high speed
(b) At no load it will not develop high starting torque
(c) It cannot start without load
(d) It draw a small amount of current at no load

Ans.(a)
20. A tunnel diode is

(a) High resistivity p-n junction diode
(b) A slow switching device
(c) An amplifying device
(d) A very heavily doped p-n junction diode

Ans.(d)

21. The effective channel length of a MOSFET in saturation decreases with increase in

(a) Gate voltage
(b) Drain voltage
(c) Source voltage
(d) Body voltage

Ans. (b)
22. The ON voltage and forward breakover voltage of an SCR depends on the

(a) Gate current alone
(b) Band gap of the semiconductor alone
(c) Gate current and the semiconductor band gap respectively
(d) Semiconductor bandgap and the gate current respectively

Ans.(c)
23. Negative feedback in amplifier

(a) Improves the signal to noise ratio at the input
(b) Improves the signal to noise ratio at the output
(c) Does not affect the signal to noise ratio at the output
(d) Reduce the distortion.

Ans.(b)
24. An ideal Op- Amp is an ideal

(a) Voltage controlled current source
(b) Voltage controlled voltage source
(c) Current controlled current source
(d) Current controlled voltage source

Ans.(b)
25. One of the following types of noise becomes of great importance at high frequencies. It is the

(a) Shot noise
(b) Random noise
(c) Impulse noise
(d) Transit- time noise

Ans.(d)

26. Piezoelectricity effect is the polarization of a dielectric under the influence of

(a) Light
(b) Mechanical stress
(c) Electrical stress
(d) Heat

Ans.(b)
27. Entropy of mixture of two gases after sudden mixing is

(a) Greater than
(b) Less than
(c) Same as sum of entropy of individual gases
(d) Unpredictable

Ans.(a)
28. If air filter is removed in a petrol engine, the air/fuel ratio will

(a) Increase
(b) Decrease
(c) Increase and decrease
(d) Remains unchanged

Ans.(a)
29. In a two stage compression , inter -cooling is used for

(a) Reducing work of compression in the first stage
(b) Reducing temperature in the first stage
(c) Reduced work in the second stage
(d) Reducing work and temperature in the second stage

Ans.(d)
30. Which component of refrigeration system controls the flow of refrigerant

(a) Expansion valve
(b) Condenser
(c) Compressor
(d) Evaporator

Ans.(a)

31. Laser beam welding has widest application in

(a) Mass production in heavy industry
(b) Jobbing industry
(c) Electronic industry
(d) Structure and bridge work

Ans.(c)
32. In Equation x-2y+3z=0 and 2x+5y+3z=0, y equals

(a) 0
(b) 1
(c) 2
(d) 3

Ans.(a)
33. If a system of equation has one or more solution it is called

(a) Compatible
(b) Consistent
(c) Homogeneous
(d) Simultaneous

Ans.(b)
34. In a microprocessor the register which holds the address of the next instruction to be fetched is

(a) Accumulator
(b) Program counter
(c) Stack pointer
(d) Instruction register

Ans.(b)
35. The mnemonics used in writing a program is called

(a) Assembly language
(b) Fetch cycle
(c) Microinstruction
(d) Object program

Ans.(a)

36. For which of the following devices, is DMA the most suitable
(a) Keyboard
(b) Mouse
(c) Joy stick
(d) Hard stick

Ans.(d)

37. In real time operating system, which of the following is the most suitable scheduling scheme?

(a) Round robin
(b) First come first served
(c) Random scheduling
(d) Preemptive

Ans.(d)
38. In client –server system , data is usually stored on the

(a) Server
(b) Client
(c) Network
(d) None of the above

Ans.(a)
39. Identify the natural

(a) LISP
(b) PROLOG
(c) Both (a) and (b)
(d) Neither (a) and (b)

Ans.(c)
40. An interrupt that can temporarily ignored by the counter is known as

(a) Vectored interrupt
(b) Non – maskable interrupt
(c) Maskable interrupt
(d) Low priority interrupt

Ans.(c)

Hi,

You can search for question papers in www.pdfsearch.com.
Can also check with : http://questionpaper.in/
For online test papers. Do checkhttp://www.tcyonline.com/india/home

Good Luck

hello dear ...can u tell me the answer of second attachment??? plzzz

dear friend
u can get model papers from competitive EKT exam book.and u can also get questions from the web site of ekt.
good luck.

when is the result of ekt 2010 been declared?

best book for EKT?

when the ekt exam can be take? whats the age limit in exam? which books we can reffer for ekt?
how many attempt r present their?
plz reply fast..........

thanx alot for giving few quetions