Education and Career Forum

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

Ongc takec a part parcel exam corresponding to this areas:
1. Technical
2. Communication
3. Interview and g.d
The score of gate valids you to the call. Sample papers can be found at freshersworld.com
Best of luck.

i am providing some questions of year 2008-2009:
1. Two free parallel wires carrying current in the opposite directions

(a) Attract each other
(b) Repel each other
(c) Do not effect each other
(d) Get rotated to be perpendicular to each other
Ans.(b)
2. All the magnetic materials looses their magnetic property when

(a) Dipped in water
(b) Dipped in oil
(c) Brought near piece of iron
(d) Strongly heated

Ans.(d)
3. Potassium paramagnet is used for

(a) Dechlorination
(b) Improving colour
(c) Reducing acidity
(d) Reducing hardness

Ans.(b)
4. Which of the following material has the highest carbon percentage?

(a) Cast iron
(b) Mild steel
(c) High carbon steel
(d) Stainless steel

Ans.(a)
5. Which of the following paints is most fire resistant

(a) Bituminous paint
(b) Asbestos paint
(c) Aluminum paint
(d) Synthetic paint

Ans.(b)

6. The gas which is mainly responsible for the explosion in sewers is

(a) Methane
(b) Ethane
(c) Ammonia
(d) Carbon- monoxide

Ans.(d)
7. The Wind screen of car made of

(a) Sheet glass
(b) Wired glass
(c) Laminated glass
(d) Flint glass

Ans.(c)
8. Which of the welding process is used for welding of structures?

(a) Gas welding
(b) Fusion welding
(c) Thermic welding
(d) Arc welding

Ans.(d)
9. In a d.c generator, following losses will be minimum

(a) Copper loss
(b) Iron loss
(c) Friction loss
(d) Shunt field copper loss

Ans.(b)
10. Corona loss is less when the shape of the conductor is

(a) Circular
(b) Flat
(c) Oval
(d) Independent of shape

Ans.(a)

11. The core of the transformer is assembled with laminated sheet so as to reduce

(a) Hysteresis loss
(b) Copper loss
(c) Magnetic noise
(d) Eddy current loss

Ans.(d)
12. Which of the following instrument is used for measuring the rate of flow of liquid of pipes

(a) Hydro meter
(b) Venturi meter
(c) Viscometer
(d) Falter pump

Ans.(b)
13. The proper use of lubricants cannot reduce

(a) Static friction
(b) Inertia
(c) Sliding friction
(d) Rolling friction

Ans.(b)
14. Infra red radiation can be detected by

(a) Spectrometer
(b) Pyrometer
(c) Nanometer
(d) Photometer

Ans.(b)
15. Which of the following is used in optical fibers

(a) Total internal reflection
(b) Scattering
(c) Diffraction
(d) Refraction

Ans.(a)

16. Metal attains super- conduction properties below the temperature of

(a) 0 deg K
(b) 100 deg C
(c) 100 deg K
(d) 10 deg K

Ans.(d)
17. Powder clinges to the skin because of following property

(a) Adhesion
(b) Cohesion
(c) Surface tension
(d) Capillary action

Ans.(a)
18. The sparking at the brushes in the d.c generator is attributed to

(a) Quick reversal of current
(b) Reactance voltage
(c) Armature reaction
(d) High resistance of the brushes

Ans.(c)
19. D.C series motor should always be started with load because

(a) At no load it will rotate at dangerously high speed
(b) At no load it will not develop high starting torque
(c) It cannot start without load
(d) It draw a small amount of current at no load

Ans.(a)
20. A tunnel diode is

(a) High resistivity p-n junction diode
(b) A slow switching device
(c) An amplifying device
(d) A very heavily doped p-n junction diode

Ans.(d)

21. The effective channel length of a MOSFET in saturation decreases with increase in

(a) Gate voltage
(b) Drain voltage
(c) Source voltage
(d) Body voltage

Ans. (b)
22. The ON voltage and forward breakover voltage of an SCR depends on the

(a) Gate current alone
(b) Band gap of the semiconductor alone
(c) Gate current and the semiconductor band gap respectively
(d) Semiconductor bandgap and the gate current respectively

Ans.(c)
23. Negative feedback in amplifier

(a) Improves the signal to noise ratio at the input
(b) Improves the signal to noise ratio at the output
(c) Does not affect the signal to noise ratio at the output
(d) Reduce the distortion.

Ans.(b)
24. An ideal Op- Amp is an ideal

(a) Voltage controlled current source
(b) Voltage controlled voltage source
(c) Current controlled current source
(d) Current controlled voltage source

Ans.(b)
25. One of the following types of noise becomes of great importance at high frequencies. It is the

(a) Shot noise
(b) Random noise
(c) Impulse noise
(d) Transit- time noise

Ans.(d)

26. Piezoelectricity effect is the polarization of a dielectric under the influence of

(a) Light
(b) Mechanical stress
(c) Electrical stress
(d) Heat

Ans.(b)
27. Entropy of mixture of two gases after sudden mixing is

(a) Greater than
(b) Less than
(c) Same as sum of entropy of individual gases
(d) Unpredictable

Ans.(a)
28. If air filter is removed in a petrol engine, the air/fuel ratio will

(a) Increase
(b) Decrease
(c) Increase and decrease
(d) Remains unchanged

Ans.(a)
29. In a two stage compression , inter -cooling is used for

(a) Reducing work of compression in the first stage
(b) Reducing temperature in the first stage
(c) Reduced work in the second stage
(d) Reducing work and temperature in the second stage

Ans.(d)
30. Which component of refrigeration system controls the flow of refrigerant

(a) Expansion valve
(b) Condenser
(c) Compressor
(d) Evaporator

Ans.(a)

31. Laser beam welding has widest application in

(a) Mass production in heavy industry
(b) Jobbing industry
(c) Electronic industry
(d) Structure and bridge work

Ans.(c)
32. In Equation x-2y+3z=0 and 2x+5y+3z=0, y equals

(a) 0
(b) 1
(c) 2
(d) 3

Ans.(a)
33. If a system of equation has one or more solution it is called

(a) Compatible
(b) Consistent
(c) Homogeneous
(d) Simultaneous

Ans.(b)
34. In a microprocessor the register which holds the address of the next instruction to be fetched is

(a) Accumulator
(b) Program counter
(c) Stack pointer
(d) Instruction register

Ans.(b)
35. The mnemonics used in writing a program is called

(a) Assembly language
(b) Fetch cycle
(c) Microinstruction
(d) Object program

Ans.(a)

36. For which of the following devices, is DMA the most suitable
(a) Keyboard
(b) Mouse
(c) Joy stick
(d) Hard stick

Ans.(d)

37. In real time operating system, which of the following is the most suitable scheduling scheme?

(a) Round robin
(b) First come first served
(c) Random scheduling
(d) Preemptive

Ans.(d)
38. In client –server system , data is usually stored on the

(a) Server
(b) Client
(c) Network
(d) None of the above

Ans.(a)
39. Identify the natural

(a) LISP
(b) PROLOG
(c) Both (a) and (b)
(d) Neither (a) and (b)

Ans.(c)
40. An interrupt that can temporarily ignored by the counter is known as

(a) Vectored interrupt
(b) Non – maskable interrupt
(c) Maskable interrupt
(d) Low priority interrupt

Ans.(c)

Originally Posted by JITENDER1985

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

Hai,

ONGC exam consists of 2 sections:
1.General Knowledge
2.Technical Knowledge

All are multiple choice questions only

You can download sample papers from way2freshers.com

Regards

Originally Posted by JITENDER1985

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

Hi
I give you some details
Test-3 Hours
Objective and subjective(Descriptive)

~General Awareness-50marks
-50 Objective questions
-2 Descriptive Questions

~Subjective- 100 Marks
75 Objective questions
2 descriptive questions

The specialization section has questions from your discipline.

I have attached some papers please check that.
And please check below given site for more details.
http://www.gjtutorial.com/news/2009/09/ongc-recruitment-syllabus-pattern-sample-papers/
Good Luck

Dear friend,

You can download the previous year solved papers of ONGC from the site:

www.way2freshers.com/placement-papers/ongc/ongc-recent-exam-paper-ongc-old-papers.html

Also the sample papers can be downloaded from:
www.gjtutorial.com/.../ongc-recruitment-syllabus-pattern-sample-papers

All the best!

ONGC has announced recruitment of Graduate Trainees 2009. The selection will be on the basis of a written exam and interview. The test pattern is given below. It is a tough exam and one needs to study hard to get through.
Test Duration:
3 hours
Sections of Exam:
Test is objective as well as subjective (descriptive):
1) General Awareness (50 Marks):
a. 50 Objective Questions (40 to be attempted, 1 Mark each)
b. 2 Descriptive Type Questions (5 Marks Each)
2) Subject Specialization (100 Marks)
a. 75 Objective Questions (60 to be attempted, 1.5 mark each)
b. 2 Descriptive Type Questions (5 Marks Each)
The specialization section has questions from the discipline in which the candidate has completed the degree for eligibility e.g. Electrical, Mechanical etc.

Engineering Sample Question Papers:
Electrical Specialization Sample Questions
Computers Specialization Sample Questions
Micro Processors Specialization Sample Questions
Instrumentation Specialization Sample Questions
Network Transmission Sample Questions
Communication Specialization Sample Questions
Control Systems Specialization Sample Questions
Books for Engineering Exams

Sample Question Papers:
Quantitative Aptitude:
Arithmetic Sample Paper
Previous Paper for Quantitative Aptitude
Mental Ability and Reasoning:
Mental Ability Sample Paper
Reasoning Sample Paper
Previous Paper for Reasoning
General Awareness (GK):
Current GK 2009 - 2010
Sample Paper for General Knowledge

Current GK 2009 - 2010

Dear friends

I like Previous solved papers of ONGC (Mechanical Engineering) very much.

Very useful for me.

Rgs

the priveous year question paper are available in the book stall you can buy it .it is helpfull for you..thanking you. best of luck...

hi where can i find previous papers of ongc for mechanical engg???

How many seats in ongc for mech branch ?

hi i want onge placement previous years solved papers of electronic &communication and mechanical branches,at least 5 papers.very urgently,please help me.

ongc placement paper for instrumentation

please send me some mechanical engineering solved papers of previous years at [email protected] .i wil b very thankful to you..

i have applied for Assistant Technician (production) can any one help me with this please send me helpful links and info at [email protected]

i have applied for assistant technician (mechanical) can any one help me with this please send me helpful links of question & answers at [email protected]

Originally Posted by Unregistered

How many seats in ongc for mech branch ?

37 nos

Hello Sir, I am Vinod Kokane, I Will appearing the ONGC Exam 2011, could you plz send me the old question and answer paper on my email id, [email protected],, hope positive reply will come soon.

please send me solve ongc papar of 2011 on my e mail id. [email protected]

i have applied for Production and mechanical engineer (mechanical) can any one help me with this please send me helpful links of question & answers at [email protected]

Originally Posted by JITENDER1985

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

Jitender pls also send the papers if u got it by somebody.
shailesh

Originally Posted by JITENDER1985

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

Jitender pls also send the papers if u got it by somebody. mail id is - [email protected]

shailesh

please suggest me the appropriate book to crack ONGC Exam 2011 on my e mail id. [email protected]

hi , i want previous question papers of ONGC for chemical pls send to me my mail ID [email protected] this will be very helpful for me pls help me.

where to get the ongc placement papers for mechanical

How many seats in ongc for mech branch in 2011

are yaar r.k. jain se jyada nahi aata

Originally Posted by JITENDER1985

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

send with solutions

Hello Sir, I am kk mandal, I Will appearing the ONGC GT Exam 18th sept. 2011, could you plz send me the old question and answer paper(mechanical enjineering) on my email id, [email protected]............

Originally Posted by JITENDER1985

Please anyone send me the previous solved papers of ONGC (Mechanical Engineering) at my email id [email protected]. Please help me.

pleas send as early as possible

wanted to know whether
1. to pay and apply through sbi separately for different post

plz send me previous questionpapers at my mail, ([email protected])

sir pls refer me the best book i can go through for the preparation of ongc entrance. i'll be really grateful to you.

can anyone plz send me previously solved papers of mechanical branch. plz help me
my email id: [email protected]

Hello Sir, I am prabhaakr jha, I Will appearing the ONGC GT Exam 18th sept. 2011, could you plz send me the old question and answer paper(mechanical enjineering) on my email id, [email protected]............

sir please send me previous question paper by which i can make my preparation strong and please refer me a book for for ongc entrance.
My email id: [email protected]
Please help me.

how to get sucess in ongc papaers

plz send me previous ongc question papers of mechanical engineering at my email id [email protected]

plz send me previous ongc question papers of mechanical engineering at my email id [email protected]

hello sir plz help me i want old sample papers and syllabus for mech engg in ongc exam help on 18 sep 2011.

kis book se padhain jis se hum log select ho jayein ongc sir plz help me.

my mail id

[email protected]

cell no 09827382479 avinash

Hey guys, I have appeared in this exam previously.

can any send me ONGC previous years question papers
[email protected]

sir hw many seats for electroni & instrumentation engineer in ongc

please sir give me some tips for ONGC selection procedure.........
my email- [email protected]
my mb -8802357824

PLEASE SIR HELP ME FOR ONGC SELECTION PROCEDURE.....
MY [email protected]

ple send me previous question papers & syllabus of ongc production engineering
[email protected]

Originally Posted by Unregistered

Current GK 2009 - 2010

i want last two years questions of ONGC (mechanical engg), so i can prepare very well to attend this year exam. my email is [email protected]

hi friends please send ongc mech papers
[email protected]

sir i am going to appear for ongc 2011.. please send me previous years papers for mechanical....my email id [email protected]