Education and Career Forum

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

There are quite a few entrance exams in the field of engineering. If you have a flair for the drawing you could probably go in for architecture field. For this you need to appear for the AIEEE. Along with that you must appear for the NATA exam. You can also appear for the state level engineering exam.

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

After 12th you can go for Medical or engineering by IIT JEE or AIEEE,otherwise you can go for BCA,BBA,LLB,Hotel management,Air host etc...

Hello,

1. If you are interested in engineering ( TECHNICAL COURSE ) field then you can do B.E. or B.Tech. in any engineering stream after 12th standard (Maths Subject).

Entrance Exam For B.E. or B.Tech. = AIPET ( All India Pre Engineering Test ) or State PET (Pre Engineering Test ).

2. If you are interested in NON-TECHNICAL COURSE then you can do B.Sc. or B.Com. or BBA or BCA or B.A. in any subject after 12th standard (Maths or Biology Subject or any Subject).

Entrance Exam For B.Sc. or B.Com. or BBA or BCA or B.A. = Direct Admission

3. If you are interested in Medical field then you can do MBBS or BAMS or etc. in any stream after 12th standard (Biology Subject).

Entrance Exam For MBBS or BAMS = AIPMT ( All India Pre Medical Test ) or State PMT (Pre Medical Test ).


Good Luck

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

hello, you better aieee examination in which it contains a course named b.arch which mainly focuses on engineering drawing.some reputed colleges do offer this course.

Hello Kritika,

There are number of career options for you after passing 10(+2).

As you have engineering drawing in your 12th, you can pursue B.Arch course, only if you have interest in engineering drawing.

To study this course in reputed colleges, you have to give AIEEE exam,which is an all India competitive engineering entrance exam.

According to your rank,you will get a particular college to study Bachelor in Architecture. So higher rank will give you choice of better institutes.

To be eligible for appearing in AIEEE, you should get at least 50% marks in 12th,along with 50% in average in the PCM subjects also.

If you are thinking to go for B.Arch, or any engineering courses after 12th,from now,you should start preparing for AIEEE, where there is tough competition every year.

Other than AIEEE, you can also try other state entrance exams for engineering like, CET(Karnataka), KITEE(Orissa), WBJEE(West Bengal) etc.

It is your high time and so you should start preparing for these exams.

Best wishes.!!

From your question it is quite clear that you have interest on drawing ....
As you have taken Engineering drawing as a subject...you will gather many information on it...
So if you are about to get admission in any engineering college then you will have to sit for some corresponding exams and hold good marks....
engineering exams are like:
1>IIT-JEE(For entering into IITs)
2>AIEEE(All India basis exam...with this score you can get admission in all A.I.C.T.E approved colleges all over India...
3>State based Engineering exam (Every state organize their own engineering exam for entering into the engineering colleges in their states(Govt. and Private colleges)...

*If you are interested in architecture you can also get admission through AIEEE score...

*If you want to go for medical then every state has their own medical exam just go through it....

*Or If you have a any query then make me clear...I will give you proper suggestions...

Thank you and best of luck....

Hi Kritika,

If you aspire for Engg i.e B-tech than go for various competitive exams such as- AIEEE, IIT, Jamia Milia Islamia, UPTU, IP university. CEE of delhi university. and many other states exam. and there are various other courses also such as BSc(maths), chemistry) it only depends on your interest.

Thanks

there are lot of entrance examination . you didn't mention the 12 group either maths ,phy,che or biology ..... any way ....
for engineering ..entrance exams are AIEEE, JEE, AMRITA,BIT SAT,..IISc entrance test ..manipal university,....

Dear Friend,
If you have opt Engineering Drawing As a subject you can go for mechanical engineering.

For entrances , you can prepare yourself for
GATE Exam or CEED Exam.

Visit on below link also, for better reply.
http://www.engineeringentrance.info/2010/07/btech-in-mechanical-engineering.html



All the very best

after 12th graduation is most pmportant

you can go for engineering and also for architecture.

both fields are very good.for engineering you can take exam like AIEEE,IIT JEEE these two are the main exam .

eligibility :for IIT JEE: min 60% marks in 12th class
for AIEEE-:12th pass.

for architecture: AIEEE conducts its own architecture exam and they conducts it at the time of may with the main exam .once you will get select then you will be called for counseling and you can have college f your choice.

if you have done 12th in science & with math you should try for IIT-JEE & AIEEE to become an engineer & secure the bright future .there are state entrance exams also for doing engineering in home state but IIT & NIC has diffrant relputation.
if you are 12th with biology you can try for medical tests for state & national level called as 'PREMEDICAL TEST' (pmt) .
if you wanna go in government job or civil services you may opt for B.Sc. also.
if you are an art student then you may opt for B A & set prepare for NET exam to secure job.
hope you would be satisfied.
thank you

you can go for B.tech or B. arch.

ranking of engineering college:-

Top Engineering Colleges in India
RANK Name of Institute

1 Indian Institute of Technology IIT Kanpur

2 Indian Institute of Technology IIT Kharagpur

3 Indian Institute of Technology IIT Bombay

4 Indian Institute of Technology IIT Madras

5 Indian Institute of Technology IIT Delhi

6 BITS Pilani

7 IIT Roorkee

8 IT-BHU

9 IIT-Guwahati

10 College of Engg , Anna University, Guindy

11 Jadavpur University , Faculty of Engg & Tech., Calcutta

12 Indian School of Mines, Dhanbad

13 NIT- National Institute of Technology Warangal

14 BIT, Mesra

15 NIT- National Institute of Technology Trichy

16 Delhi College of Engineering , Delhi

mostly of these colleges offers B.tech as well as B Arch

there are many streams of engineering as well :-
1) computer science (CSE)
2) information technology (IT)
3) mechanical (MECH)
4) civil engg.
5) Electronics and comm. (ECE)
6) Electronics and Electrical (EEE)
and many more streams are there .YOU can choose any one according to your choice .
Every year ENTRANCE TEST are held for the above mentioned colleges.

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

hi kritika
Ater completeing your 12th,you have to write some entrance xams like EAMCET,AIEEE,IIT for engineering...so tat according 2 ur rank which u get in those xams...u'll b given a seat in an engineering college

kritika , you better to go for architech,if you are good in drawing engineering...
You can apply for AIEEE to get a proper rank in architech.

you can do various kind of courses after 12th.....
like if you want to go the medical side then you can give entrance exam like
AIPMT
AIIMS
AFMC
or any state entrance exam etc..

also you can go to engineering side by giving entrance exams like
IIT-JEE
AIEEE
VIT
STATE ENTRANCE exams etc..

as you have opted engineering drawing subject so u should go to the engineering line... and most probably to the mechanical or civil branches.... here you will be greatly benefitted..

There are a number of engineering entrance exams.first of all,you check out the rankings of the top 100 engineering colleges in india and then fill forms according to your choice.Some of the popular exams are IITJEE,AIEEE,SRM,KIIT,GITAM,VIT,MIT,KARUNYA,AMRITA University and many more.be careful with AIEEE entrance.many other good colleges take students from AIEEE ranks.you need to fill their form separately .example DAIICT,NIITand JIIT.before filling any form,remember to visit the college site.
All the best kritika

hi...
Depending upon your stream you can choose the following:
SCIENCE STREAM:you can join medical by giving aipmt and other state medical test;you can go for engineering...give entrances like iit-jee or aieee..
otherwise you can join a general line..you can do bsc with any specialization like biotechnology,microbiology,biochemistry,genetics,m athematics,statistics and so on...lots of opportunities are there..
ARTS:u can opt for ba in journalism,mass communication,fashion designing etc...u can study law also..
CoMMERCE:u can do bcom,bbm and later on take mba...u cn also give exam for chartered accountant...
these are only some of the options i gave...you can check out the rest...gud luck...

After 12th there are many options. You may go for professional courses like Engineering, Medical, CA, CS etc. or simply for a bachelor's degree from any university in science, commerce or arts depending upon the subjects you studied in Class 12th. There are some institutions like NIIT etc which also offer various courses providing you with a Technical degree and a Graduation degree both.

What to do after 12th

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

As you would be very much Perfect in Angles + Isometric Views.

So your profession should like Professional. yes you Guessed it right !! An Architect.

You can Go for Architect, For this you can Give ample Of Exams like State and National B.Arch Exams.

One more Option is also available with your, Engineering Drawing is a subject in all semester for Mechanical Engineering Students

so if you opt for Engineering then Go for Mechanical Brach, that will be very Benificial for you.

And more over Engineering Exams are IIT JEE, AIEEE, Various state Exams. etc.

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

you can do various courses like BBA,BCA... best of all you can do B.TEC from IIT . and entrance exam is must for all courses

After your 12th you should choose a course which your really interested in. If you are interested in engenerring or MBBS you can take up the entrance exam like CET,IIT,JEE,AIEE etc. You can also join any degree courses. Alternatevily you can also do courses like CA, lab tech etc

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

Dear,
There is a lot of opportunity for engineering drawing like Engineering Drawing is a subject in all semester for Mechanical Engineering Students
so if you opt for Engineering then Go for Mechanical Brach, that will be very Benificial for you.
And more over Engineering Exams are IIT JEE, AIEEE, Various state Exams. etc.

best of luck.......

course after 12th so u have selected arts in 12 th so you are eligible for b.tech now.also not for medical.but you can do bsc, b.a. also bca ormakes your carree in some other field like fashion desigening,animation etc.
u can choose any course according ot your cuhoice.
also if u want a gov job or want to be ias or ips then u should do bsc or ba with yuor faviroute subjects.

If you are well skilled with engineering drawing subject, you can pursue you career in following disciplines:
-Civil Engineering

-Architecture

-Interior Designing

You can start preparing for AIEEE for the above branches if you want to pursue in good reowned colleges & you can also give exam of cept (http://www.cept.ac.in) for the same.

you can do any bachelor degree. You can write EAMCET,KCET examinations and u can do B.Tech or B.pharmacy. Other wise u can do BBA.

Best Field for you would be Architecture
Entrances for B.Arch
1. AIEEE (Eligiblity : 12th pass with 50%)
Through this exam, you will get admission in reputed 17 NITs
2. NATA (National Aptitude test for Architecture)
NATA scores are used by admissions authorities of different Government, Govt. Aided & unaided schools / colleges of Architecture, to provide common measures for comparing the qualifications of applicants.

1.Chitkara School of Planning & Architecture, of Chandigarh;

2.Sathyabama University, located in Chennai - Tamil Nadu;

3.Apeejay Institute of Technology, School of Architecture & Planning and Rachana Sansad Academy of Architecture, Mumbai

4.Narsee Monjee Institute of Management and Higher Studies (NMIMS) of Karnataka

5.Bengal Engineering and Science University, of Kolkata

Hello Buddy,

Before i suggest you about your higher studies and exams, i would like to let you know that engineering drawing is not only the province of draft person.It is the vital language for engineers.This subject is mandatory for all first year engineering students of all streams but its much vital subject for civil and mechanical and archietect streams . so its a good oppurtunity for you to score good marks in it .so lastly i would like to give a THUMPS UP for opting for any of the three above mentioned streams for a bright future if you go for engineering.

LIST OF ENTRANCE EXAMS :-

IIT-JEE - For all IIT colleges
KARNATAKA CET - For all karnataka based colleges

So these two types for examination can lead you for a good future and the only key to these colleges is scoring good marks.

!!! ALL THE BEST !!!

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

You have many option after 12th class. If your interest in the engineering then you can give the engineering entrance exam after 12th or appearing in the 12th. You can also do Architecture course according to your choice. You can appear many entrance exam like
IIT JEE
AIEEE
WBJEE
KiiTEE
ViTEEE
and many other state engineering entrance exam.

hello dear

see, if you are belongs to science back ground then you can do lots of courses after after 12th.

some of career oriented courses are given below

1.Engineering.

2.medical.

3.B.Pharm.

4.BCA.

5.BBA.

6.Hotel management.

all the best.

hich are th enterance exams to be answered if i have to do pharmacy

there are many streams of engineering as well :-
1) computer science (CSE)
2) information technology (IT)
3) mechanical (MECH)
4) civil engg.
5) Electronics and comm. (ECE)
6) Electronics and Electrical (EEE)
and many more streams are there .YOU can choose any one according to your choice .

hi frds,
well, there are no. of courses nowdays provided by different colleges. first you have to specific that wat are the subjects in your 12 and depending on that further plans can be made.
as u didint specific that what are the subjects you have taken in the 12th then it is hard to explain but then also i will give some suggestion to you.
after 12th
1. BCA(PCM IN 12TH)
2. BBA(ANY STREAM IN 12TH)
3. B.SC( IT, COMPUTER SCIENCE)(PCM IN 12TH)
forms of good universities and colleges are about to come in the market. so, pay attention and han a check on newspapers and post- office. so, that work can be cone before due date.

Hi,

you can apply for the various entrance exams like IIT-JEE, AIEEE, BITSAT, and other state level exams conducted in India for national and state level engineering colleges.
For more details about various exams and their date visit:
http://www.successcds.net/engineeringentranceexam/

All the Best..

Hi,

you can apply for the various entrance exams like IIT-JEE, AIEEE, BITSAT, and other state level exams conducted in India for national and state level engineering colleges.
For more details about various exams and their date visit:
http://www.successcds.net/engineeringentranceexam/

All the Best..

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

After 12th, You have a lots of options, But you are from engineering drawing background, then For you Architect Is Best for you.

So, i will suggest you to opt Architecture in your bachelor degree. So, according to me B.arch is the best option for you.

And to do this course, you have to appear the entrance exams Like IIT JEE, AIEEE, And after clear these examination, you will get admission in B.arch.

So, please choose course according to your own interest, if you are interested in engineering then B.arch And B.tech is the best option for You.

Latest Engineering Entrance Exam 2011 Dates and Notifications:

Indian Maritime University Chennai BTech in Marine Enineering and B.Sc in Ship Building & Repair Admission 2011

Himachal Pradesh University Shimla B.Tech (IT) Admission 2011

National Institute of Technical Teachers Training and Research Chandigarh Admission to Master of Engineering Programmes Regular and Modular 2011

Indian Institute of Information Technology (IIIT) Allahabad M.Tech Admissions 2011

Dhirubhai Ambani Institute of Information and Communication Technology Admission Notification 2011 for B Tech (ICT) DA-IICT, B Tech (ICT) program

Deenbandhu Chhotu Ram University of Science and Technology Murthal B.Tech, M.Tech, Master’s Weekend Programmes Admission Notice 2011

LNM Institute of Information Technology Jaipur B.Tech M.Tech Admissions 2011

KARNATAKA CET 2011 NOTIFICATION AND DATES

International Institute of Information Technology (IIIT) Bhubaneswar M.Tech Admissions 2011

SRMEEE 2011 SRM Engineering Entrance Examination Dates and Notification

Regional Institute of Science & Technology(RIST) Meghalaya - B.Tech Admissions 2011

BEEE 2011 - Bharath University Engineering Entrance Exam 2011

BSAUEEE-2011 - B.S. Abdur Rahman University Engineering Entrance Examination Dates and Notification

Avinashilingam Deemed University for Women Coimbatore Engineering Entrance Examination - 2011

NIIT University New Delhi BTech Admission 2011

VTUEEE-2011 - VEL Technical University Chennai All India Engineering Entrance Examination, Dates Notification

Manipal University Admissions 2011 for Undergraduate and PG courses B.Tech., Lateral Entry

North Eastern Regional Institute of Science and Technology (NERIST) entrance examination (NEE)-2011

University of Petroleum and Energy studies,Dehradun UPES-SEAT Engineering 2011 Entrance Test

DA IICT Admission Announcement 2011-12

BITSAT 2011 Notification, BITS admission Test (BITSAT) Online Entrance Test

if you are good in drawing then you should go for iit,aieee,or other state level entrance test. so best of luck!

You can go for various exams like IIT,AIEEE,BCA,BBA or any state level entrance exam

Originally Posted by kritika shersia

i am in 12th with engineering drawing as a subject ,what to do after 12th and what all entrance exams should i give?

Hi,

There are lots of courses option are available for you after 12th, but since you are having background of engineering drawing in 12, then i think Architecture is one of the best option for you.

For architecture you have to take admission in B.Arch.

And for getting admission in this course you have to appear in entrance exam conducted by AIEEE, IIT-JEE and etc...

Other than this you can go for B.Tech civil. Even for this course also you have to appear in above mentioned written exams.

So choose course as per your interest.

All the Best....

Dear friend,

There are many field after 12th class, in which you can build up your career, some of them are as follows:

1. You can apply for NDA, At present NDA II forms are being filled up.

2. You can Go for Architect, For this you have to appear State and National
level entrance B.Arch Exams.
3. You can go for graduation courses ie BA, BSc, BBA, BCA etc.

4. You can appear in engineering entrance exam ie AIEEE, IIT, State level
Engineering entrance exam.

So choose your line soon and work hard.

All the best............................

Hello friend,
As you have engineering drawing in 12th so i think you may go for B.Architecture or Engineering.
After 12th you can apply for AIEEE or IITJEE or other state level engineering examinations.
If you can score good then then you can take admission in one of the best college in India.
So prepare well in 12th as well as for entrance examinations.
Good luck!!!

YOu can appear for following entrance exams like IITJEE, AIEEE, VITEEE, DCE, BITSAT etc.

IITJEE was held on 11 april, AIEEE is going to held in few days.
You can apply only BITSAT, VITEEE now.

Many entrances you have which you go for-
AIEEE
IIT
WBJEE
MAT
CAT
BITS
CLAT

sir,i completed my 2{m.p.c} with 95.8% now i confused to take up which course in engineering?can u give me the list of courses in btech which come under research fields in future? actually i m interested to do research about the envinornment such as controlling pollution etc(i.e i want to do something new by research to control pollution) i m also interested in investegations . can u please solve my problemby giving reply to me my id z [email protected]

Originally Posted by subho19

After 12th you can go for Medical or engineering by IIT JEE or AIEEE,otherwise you can go for BCA,BBA,LLB,Hotel management,Air host etc...

sir,i complete my 12th{n.m.}and nw i am confuse to take up which course in engg.?would u give the list of courses in b.tech.
could u plz solve my problem. plz giving reply to my id [email protected]

You can go for engineering course after your 12th. For engineering course you have to give entrance exam like AIEEE, IIT JEE.

From your question it is quite clear that you have interest on drawing ....
As you have taken Engineering drawing as a subject...you will gather many information on it...
So if you are about to get admission in any engineering college then you will have to sit for some corresponding exams and hold good marks....
engineering exams are like:
1>IIT-JEE(For entering into IITs)
2>AIEEE(All India basis exam...with this score you can get admission in all A.I.C.T.E approved colleges all over India...
3>State based Engineering exam (Every state organize their own engineering exam for entering into the engineering colleges in their states(Govt. and Private colleges)...

*If you are interested in architecture you can also get admission through AIEEE score...

*If you want to go for medical then every state has their own medical exam just go through it....

*Or If you have a any query then make me clear...I will give you proper suggestions...

Thank you and best of luck....

From your question it is quite clear that you have interest on drawing ....
As you have taken Engineering drawing as a subject...you will gather many information on it...
So if you are about to get admission in any engineering college then you will have to sit for some corresponding exams and hold good marks....
engineering exams are like:
1>IIT-JEE(For entering into IITs)
2>AIEEE(All India basis exam...with this score you can get admission in all A.I.C.T.E approved colleges all over India...
3>State based Engineering exam (Every state organize their own engineering exam for entering into the engineering colleges in their states(Govt. and Private colleges)...

*If you are interested in architecture you can also get admission through AIEEE score...

*If you want to go for medical then every state has their own medical exam just go through it....

*Or If you have a any query then make me clear...I will give you proper suggestions...

Thank you and best of luck....