Education and Career Forum

hi sir, this is sathish, i have completed my B.tech in mechanical branch, last year.
I know little bit ansys and catia.
Recently i applied for, SINGARENI COLLIERIES.
Can you give me some suggestions.

dear friend,

let me tell, Mechanical is one of the best core branch..As you have done your btech from mechanical branch, so you not need to worry..

there is huge possibility to get a job..

if you get a job after completion of your btech, then it is good.. otherwise you can join for Mtech through GATE..

there are lots of company for mechanical branch here you can get a job..

1.JINDAL STEEL

2.TATA MOTORS

3.NTPC

4.BHEL

5.RAILWAYS

6.DEFENSE

etc...

so there is huge scope for better career..

all the best..

dear friend,
After B.Tech you can either do further higher studies as well as looking for jobs.
And as you a mechanical engineer then you can apply for government jobs in Railways,Defence,NTPC etc.
As you applied in SINGARENI COLLIERIES, you can join it but i suggest you to looking for other government jobs.
& kindly read employement newspaper for the knowledge of vacancies in government sectors.

good luck.

dear friend
now a days mechanical engineers have a very bright future.........you have completed your B.tech in mechanical branch, last year so you are not a fressors you have lost your one year after Btech so you are applied for public sector exam .for getting information you get create your account in website.......i will give you some site where you can get everything about public sector job
www.naukri.com
sarkari-naukri.blogspot.com
www.thefreshersworld.net
you are also applied in private sector.......you will create cv in which you give your complete information and send this cv to all core company .when they have shortage they will consider you and call you for interview.........you will get the address of the company on the website given above...................



best of luck.......................

dear friend,
as you have completed your b.tech. so you can apply in core companies related to mechanical work.

you can join any company by passing their exam.you can appear for TATA STEEL, BHEL, SAIL, INDIAN RAILWAYS, JINDAL, VEDANTA etc.

you have to make command on oyur b.tech. syllabus.

all the best.

Hi Satish
In SCCL they select the candidates only based on merit.
I don't know hom much Percentage you have obtained in B.Tech

As per its official notification in its website, they will be shortlisting candidates on the basis of merit and vacancy in the ratio 1:10.

Exam is of 2 hours duration and will be of objective multiple choice only
Will be based on your subject stream So, prepare urself well covering all the major issues of your subject, and work hard. Your software proficiency is not going to help in any way. Be prepared in your last years portion.

Since it is govt. sector, competition will be very high.

All the Best.....

dear friend

mechanical is a ever green branch. there are many opportunities for you.
you can apply for various companies in India as well as in abroad.

here is a list of companies that you can apply for

1.SAIL

2.BHEL

3.NTPC

4.DRDO

5.DEFENCE

6.TATA MOTORS

7.RAILWAY

and many private industries are there.

all the best.

for mechanical engineers there is a vast scope in our country...As it is a Core branch you will have ample opportunity in the industrial sectors such as vedanta,nalco, as well as you can also apply for software sectors also...

but one thing,,...at the beginning of your job you will have heavy work loads....


good luck !!

dear friend

mechanical is a ever green branch. there are many opportunities for you.
you can apply for various companies in India as well as in abroad.

here is a list of companies that you can apply for

1.SAIL

2.BHEL

3.NTPC

4.DRDO

5.DEFENCE

6.TATA MOTORS

7.RAILWAY

and many private industries are there.

all the best.

Originally Posted by sathishkurasam

hi sir, this is sathish, i have completed my b.tech in mechanical branch, last year.
I know little bit ansys and catia.
Recently i applied for, singareni collieries.
Can you give me some suggestions.

if you have time and caliiber then do m.tech from good enginee.college like iit

hi satish,
you can build a good career in this field my friend..

Mechanical engg has always been an evergreen course in the engineering field..Since it is a core engineering field,it has got great demand.
just keep applying for reputed core companies,and in this case,i think that the private companies give better chance to fresh engineers to flourish..
If you like then you can go for master's course in mechanical engg i.e. M.E.,which will increase your career opportunities..

So go ahead. all the best.

If you can prepare for some examinations like Army,Navy(For Engineering Graduates),that will be the best option.If you want to make your career in Industry then take experience from this organisation and go to some some best ones.

Dear friend,
as a mechanical you have a very bright future.you can apply for almost all the public sector companies.and these companies offer you a very good salary.some of them are:-
1.Hindustan motors
2.Tata motors
3.Hyundai
4.Yahama India ltd
5.Jindal Steel plant
wish you all the best!

If you have an aim of earning a good package then you should apply for merchant navy that is by applying for shipping companies and that can be easily done by registering your resume of websites like jobships.com

B.tech candidates can get offers both from public and private sector. In public sector you can get opportunities in various companies like BHEL, SAIL, NTPC etc.In private sector mechanical engineers are offered jobs in steel industry, chemical, petroleum industry. You can post resumes in various job portals and read employment news regularly. You can also work and do part time post graduation course

sir what if have back papers after the course

If you are still interested then i would suggest you to consider higher studies. How about MTech in Mechanical engg? You can specialize in a field of your interest...

Mechanical engineering jobs are openly available and i am sure you will never find any shortage of the job in this field as its an evergreen field

However if you want to make a good career in it then MTech will be the best option. If you want to go for the job then its fine no issues but MTech will just be a perfect career

So think about it

sir,
I have completed my course,Btech mechanical engineering,i am having back papers.what are the options i am having till the due time.

you can do mba or m.tech after completing b.tech or you get a job depend on you. if you want to take heigher study then you can do mba or m.tech..thanking you...best of luck.................

Originally Posted by sathishkurasam

hi sir, this is sathish, i have completed my B.tech in mechanical branch, last year.
I know little bit ansys and catia.
Recently i applied for, SINGARENI COLLIERIES.
Can you give me some suggestions.

you can go for further higher studies and as you know in mechanical branch many and many jobs are available in industries and also in IT sector. there are many big companies like TATA,AIRTEL,RELIANCE,ZEE,BIRLASOFT,etc. and you can go for defence also . Best of luck for your future.

Dear friend


you can apply for marine engineering or m.tech in aerospace field





best of luck.

Originally Posted by sathishkurasam

hi sir, this is sathish, i have completed my B.tech in mechanical branch, last year.
I know little bit ansys and catia.
Recently i applied for, SINGARENI COLLIERIES.
Can you give me some suggestions.

dear mech. is top most branch you can join lots of company and industry
like .Hindustan motors
2.Tata motors
3.Hyundai
4.Yahama India ltd
5.Jindal Steel plant
at present jindal has lots of job you can log on to the site
www.fresherworld.com

Dear friend

as you have done your BTech from mechanical engineering that is the ever green

branch,in this branch , there is lot of career options in goverment sector as well as in

private sector.So don't worry about the jobs . Definitely, You will find job. I want to

suggest you some of the good jobs in goverment sector as well as in private sector:

Goverment sector

1.Indial railway

2.IOCL

3.ONGC

4.ISCO

5.Central coaliary

6.Defense sevices

7. Indian ordinance factory


some private sector

1. Tata motors

2. Tata steel

3. TRF, Jamshedpur

4.Bhusan steel

5. Jindal

6. L&T

7.Tega

friend , if you have interest in study , then you can for the MTech or MBA.

It will increase your job prospect as well as the salary also.

Best of luck

dear friend

at first i tell you that please register
your name with cv in www.naukri.com

you can do M.Tech also after qualfying
GATE exam
if you will do score in GATE more then
95% then you can get chance in IIT.

you can do job also


there are lots of company for mechanical branch here you can get a job..



1.TATA MOTORS

2.JINDAL STEEL

3.AIR FORCE

4.BHEL

5.RAILWAYS

6.ARMY

7.NAVY

8.NTPC

as you wish

have a good day

dear friend

mechanical is a ever green branch. there are many opportunities for you.
you can apply for various companies in India as well as in abroad.

here is a list of companies that you can apply for

1.SAIL

2.BHEL

3.NTPC

4.DRDO

5.DEFENCE

6.TATA MOTORS

7.RAILWAY

and many private industries are there.

all the best.

hi all,

i am baljit, a final year Btech student of mechanical engineering.i am doing my btech in global college of engineering, amritsar, punjab. even though its a reputed college in punjab none of the mechanical companies come for recruitment in our college and i am interested to work in a place only where i can utilize something that i learned all these four years. so what is the way in which i can get into some good mechanical firm..?i am actuallly planning to repeat one year for GATE and get into some iit..! or should i look for some PG DIPLOMA courses..?if so which are the good courses which i can do ..?/

which are the good institutes in INDIA..?am ready to move out of punjab to get into a good company or a good institute...

please do put in your valuable suggestions,

with thanks ,

hello dear

there have many Companies for jobs for btech in mechanical engineering with good salaries. you can do jobs on those company.

some of them are given below

1.TATA steel.

2.tata motors.

3.jindal.

4.hindal co.

5.L&T.

6.hundai.

7.gojrej.

etc.

all the best..........

Originally Posted by Unregistered

hi all,

i am baljit, a final year Btech student of mechanical engineering.i am doing my btech in global college of engineering, amritsar, punjab. even though its a reputed college in punjab none of the mechanical companies come for recruitment in our college and i am interested to work in a place only where i can utilize something that i learned all these four years. so what is the way in which i can get into some good mechanical firm..?i am actuallly planning to repeat one year for GATE and get into some iit..! or should i look for some PG DIPLOMA courses..?if so which are the good courses which i can do ..?/

which are the good institutes in INDIA..?am ready to move out of punjab to get into a good company or a good institute...

please do put in your valuable suggestions,

with thanks ,

Dear friend

PGD courses are not very much recommended for mechanical engineering graduates. If you are not getting a job with your BTech degree then MTech would be better than PGD option.
There are no alternate of studies and tests.
So you will have to face both.
The problem of placement in private college is increasing day by day and hence the competition is being tougher regularly.
If you are determined to work i core industry then you should go for the recruitment tests of various companies. Waiting for a company in your campus is not the solution.
Every year various companies recruit engineers through written test and person interviews. apply for them and go through the process. If you are really a guy of your subject then you should have the enough knowledge to crack those exams.

The companies you can apply for this year are
ONGC, SAIL, JSPL, NTPC, CIL, IOCL etc.

Thank You

dear friend

Firstly, I have tell you that Mechanical engineering is one of the best course in now a days and this field is evergreen and you will get jobs easily after completing this course.

But, you will find jobs only when, if you have scored good marks in this course. But to complete this course from good colleges, its very difficult task.

So, after completing your Mechanical Engineering degree you may pursue your career in different fields. So, this field is considered to be dynamic because apart from the studies you tend to learn many more things.

So, if you are interested to make your career bright in this filed, then i will suggest you, just score good marks and get more practicle knowledge more than theoritical knowledge.

Originally Posted by Unregistered

sir,
I have completed my course,Btech mechanical engineering,i am having back papers.what are the options i am having till the due time.

hi,
i think you should join some coaching center for exams like gate,psu and ies.
there your preparation for your back log subject can also be done,and more over you will also have an chance of clearing exams of companies like
NTPC
BHEL
IOCL
etc
all the best

Dear friend,
i just want to tell you that your branch is best and there is very great scope in private or public sector so you can get good job. and if you want to study than you can apply for GATE other wise it is sufficient to get good job you can apply in many PSU like BHEL,IOCL,Railway,IES,NTPC,PGDCL,HPCL.

all the best.

Hai! i am doing my btech in mechanical engg the last year is going on and i am having some back papers what can i do to get better payed jobs after clearing my papers my percentage will be less

i have persoing my engg. in 2014 i will complete engg. is there any type of job of m.e in defence departement on highest post to get it after b.engg.

resp. sir,
i am persuing B.tech in Mechanical Engg. plz suggest me which is better for me....
(1) apply for govt. jobs after completing b.tech,,,,,,
(2) do preparation for enterance exams for M.B.A from FOREIGN......

dear sir,

i completed mechanical engg with 62.50 aggregate currently i am pursuing the m.tech in deemed unversity in "prdouct design & manufacturing" may i know what will be the career chance in my field to get very high package.
after one or two years experience is there any chance to go for abroad ?
can mechanical engg salary will compete to the computer science engg salary? if yes than suggest me the field & place ?
i am ready to go for any country, may i know which country is offering the good salary & field?
please answer my few quires this may help to all reader
thank you

if ur good in ur subject u shud go for gate exam and after that u shud take admision in iits and nits from there u have to good chance in particular field of mechanical engineering

try any consultant becoz now a days there are lot of oppurtunities for mech students to work in abroad.

chosse your carrier in field work or office work.
like office work studied some softwares related to your field like PROE,SAP...Etc

I m in final yr of btech mechanical.Aftr btech i wud like 2 enter piping designing field.i jst wnt 2 knw d career prospcts in d piping designing field like d average packag dt 1 cn gt in piping designing field.n i wud b grateful if any of u cud recomend me gud institutes 4 piping designing.

I am a mechanical engineer, currently working in production section(machining) of a roll making company.Please suggest some post graduation diploma courses or short courses which will help me to grow my career.

Hello sir I m very much confused guy .m in 2nd year of eng.wat r the alternatives other than gate I can try for.

hello sir,

i'v just completed my b.tech,CSE 2010.i am not intrested in ITsector.what are the other options i have.how can i make a good career.

Sir/madam, can i do an mtech in aaeronautics and astronautics after a btech in mechanical engineering ? if not, after which core stream in btech can i opt astronautics in mtech(i'm yet to enter a college).

Dear,
Hi,
In SCCL they select the candidates only based on merit.
I don't know hom much Percentage you have obtained in B.Tech

As per its official notification in its website, they will be shortlisting candidates on the basis of merit and vacancy in the ratio 1:10.

Exam is of 2 hours duration and will be of objective multiple choice only
Will be based on your subject stream So, prepare urself well covering all the major issues of your subject, and work hard. Your software proficiency is not going to help in any way. Be prepared in your last years portion.

Since it is govt. sector, competition will be very high.

Thanks.

Dear,I completed my B.tech(Mechanical Engineering) last year with 80%,and presently working for a private company as a Design Engineer.I gave three yrs of service agreement with this company.
I am Interested to settle in Design field.So along with my job I am thinking to do further studies.Which PG course will be better for me(M.Tech/M.S/M.B.A)?
and how about the future of this field?Whether we must pursue the course as Regular or will Distance education be useful?
Eagerly waiting for Reply

can an automobile engineering student enter the field of oil and gas by diong piping course from a certified institue

now a days mechanical engineers have a very bright future.........you have completed your B.tech in mechanical branch, last year so you are not a fressors you have lost your one year after Btech so you are applied for public sector exam .for getting information you get create your account in website.......i will give you some site where you can get everything about public sector job
www.naukri.com
sarkari-naukri.blogspot.com
www.thefreshersworld.net
you are also applied in private sector.......you will create cv in which you give your complete information and send this cv to all core company .when they have shortage they will consider you and call you for interview.........you will get the address of the company on the website given above..

subjects b-tech machanical

how to make a good career after b.tech in production and industrial engineering?

after doing your B.TECH you further study
or
you may choose for job

Mechanical your branch is a very good branch
So many opportunity are there

so you decide what you do go for future???

Good luck for future..........