Education and Career Forum

i need the complete details of ies syllabus for eee branch. how to prepare for the exam to get top marks.





----mikitha-----

freind hi,

--ELECTRICAL ENGINEERING PAPER - I
(For both objective and conventional types papers)

PageTop

1. EM Theory

Electric and magnetic fields. Gauss’s Law and Amperes Law. Fields in dielectrics, conductors and magnetic materials. Maxwell’s equations. Time varying fields. Plane-Wave propagating in dielectric and conducting media. Transmission lines.

2. Electrical Materials

Band Theory, Conductors, Semi-conductors and Insulators. Super-conductivity. Insulators for electrical and electronic applications. Magnetic materials. Ferro and ferri magnetism. Ceramics, Properties and applications. Hall effect and its applications. Special semi conductors.

3. Electrical Circuits

Circuits elements. Kirchoff’s Laws. Mesh and nodal analysis. Network Theorems and applications. Natural response and forced response. Transient response and steady state response for arbitrary inputs. Properties of networks in terms of poles and zeros. Transfer function. Resonant circuits. Threephase circuits. Two-port networks. Elements of two-element network synthesis.

4. Measurements and Instrumentation

Units and Standards. Error analysis, measurement of current, Voltage, power, Power-factor and energy. Indicating instruments. Measurement of resistance, inductance, Capacitance and frequency. Bridge measurements. Electronic measuring instruments. Digital Voltmeter and frequency counter. Transducers and their applications to the measurement of non-electrical quantities like temperature, pressure, flow-rate displacement, acceleration, noise level etc. Data acquisition systems. A/D and D/A converters.

5. CONTROL SYSTEMS.

Mathematical modelling of physical systems. Block diagrams and signal flow graphs and their reduction. Time domain and frequency domain analysis of linear dynamical system. Errors for different type of inputs and stability criteria for feedback systems. Stability analysis using Routh-Hurwitz array, Nyquist plot and Bode plot. Root locus and Nicols chart and the estimation of gain and phase margin. Basic concepts of compensator design. State variable matrix and its use in system modelling and design. Sampled data system and performance of such a system with the samples in the error channel. Stability of sampled data system. Elements of non-linear control analysis. Control system components, electromechanical, hydraulic, pneumatic components.

ELECTRICAL ENGINEERING PAPER - II
(For both objective and conventional types papers)

PageTop

1. Electrical Machines and Power Transformers

Magnetic Circuits - Analysis and Design of Power transformers. Construction and testing. Equivalent circuits. Losses and efficiency. Regulation. Auto-transformer, 3-phase transformer. Parallel operation.

Basic concepts in rotating machines. EMF, torque, basic machine types. Construction and operation, leakage losses and efficiency.

B.C. Machines. Construction, Excitation methods. Circuit models. Armature reaction and commutation. Characteristics and performance analysis. Generators and motors. Starting and speed control. Testing, Losses and efficiency.

Synchronous Machines. Construction. Circuit model. Operating characteristics and performance analysis. Synchronous reactance. Efficiency. Voltage regulation. Salient-pole machine, Parallel operation. Hunting. Short circuit transients.

Induction Machines. Construction. Principle of operation. Rotating fields. Characteristics and performance analysis. Determination of circuit model. Circle diagram. Starting and speed control.

Fractional KW motors. Single-phase synchronous and induction motors.

2. Power systems

Types of Power Stations, Hydro, Thermal and Nuclear Stations. Pumped storage plants. Economics and operating factors.

Power transmission lines. Modeling and performance characteristics. Voltage control. Load flow studies. Optimal power system operation. Load frequency control. Symmetrical short circuit analysis. ZBus formulation. Symmetrical Components. Per Unit representation. Fault analysis. Transient and steady-state stability of power systems. Equal area criterion.

Power system Transients. Power system Protection Circuit breakers. Relays. HVDC transmission.

3. ANALOG AND DIGITAL ELECTRONICS AND CIRCUITS

Semiconductor device physics, PN junctions and transistors, circuit models and parameters, FET, Zener, tunnel, Schottky, photo diodes and their applications, rectifier circuits, voltage regulators and multipliers, switching behavior of diodes and transistors.

Small signal amplifiers, biasing circuits, frequency response and improvement, multistage amplifiers and feed-back amplifiers, D.C. amplifiers, Oscillators. Large signal amplifiers, coupling methods, push pull amplifiers, operational amplifiers, wave shaping circuits. Multivibrators and flip-flops and their applications. Digital logic gate families, universal gates-combination circuits for arithmetic and logic operational, sequential logic circuits. Counters, registers, RAM and ROMs.

4. MICROPROCESSORS

Microprocessor architecture-Instruction set and simple assembly language programming. Interfacing for memory and I/O. Applications of Micro-processors in power system.

5. COMMUNICATION SYSTEMS

Types of modulation; AM, FM and PM. Demodulators. Noise and bandwidth considerations. Digital communication systems. Pulse code modulation and demodulation. Elements of sound and vision broadcasting. Carrier communication. Frequency division and time division multiplexing, Telemetry system in power engineering.

6. POWER ELECTRONICS

Power Semiconductor devices. Thyristor. Power transistor, GTOs and MOSFETS. Characteristics and operation. AC to DC Converters; 1-phase and 3-phase DC to DC Converters; AC regulators. Thyristor controlled reactors; switched capacitor networks.

Inverters; single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

all the best

Need Syllabus For IES i.e Indian Engineering Services conducted by upsc every year.

Overview of the pattern of the Exam.

It is having Two sectional Papers One is Objective papers which is having 2 hrs of General English and General Studies and even 2 hrs of Electrical Paper .

2nd is Conventional papers with 3 hrs of Paper I (Electrical Engineering) and 3 Hrs Paper II (Electrical Engineering).Total comes to 1000 Marks paper.

Syllabus consists of Following Topics :-(For both objective and conventional types papers)

PAPER - I

1.EM Theory
Electric and magnetic fields. Gauss’s Law and Amperes Law. Fields in dielectrics,conductors and magnetic materials. Maxwell’s equations. Time varying fields. Plane-Wave propagating in dielectric and conducting media. Transmission lines.

2. Electrical materials Band Theory, Conductors, Semi-conductors and Insulators. Super-conductivity. Insulators for electrical and electronic applications. Magnetic materials. Ferro and ferri magnetism. Ceramics, Properties and applications. Hall effect and its applications. pecial semi conductors.

3. Electrical Circuits Circuits elements. Kirchoff’s Laws. Mesh and nodal analysis. Network Theorems and applications. Natural response and forced response. Transient response and steady state response for arbitrary inputs. Properties of networks in terms of poles and zeros. Transfer function. Resonant circuits. Three phase circuits. Two-port networks. Elements f two-element network synthesis.

4. Measurements and Instrumentation Units and Standards. Error analysis, measurement of current, Voltage, power, Power-factor and energy. Indicating instruments. Measurement of resistance, inductance, Capacitance and frequency. Bridge measurements. Electronic measuring instruments. Digital Voltmeter and frequency counter. Transducers nd heir applications to the measurement of nonelectrical quantities like temperature, pressure, flow-rate displacement, acceleration, noise level etc. Data acquisition systems. A/D and D/A converters.

5. CONTROL SYSTEMS Mathematical modelling of physical systems. Block diagrams and signal flow graphs and their reduction. Time domain and frequency domain analysis of linear dynamical system. Errors for different type of inputs and stability criteria for feedback systems. Stability analysis using Routh-Hurwitz array, Nyquist plot and Bode plot. Root locus and Nicols chart and the estimation of gain and phase margin. Basic concepts of compensator design. State variable matrix design. Sampled data system and performance of such a system with the samples in he error channel. Stability of sampled data system. Elements of non-linear control analysis. Control system components, electromechanical, hydraulic, pneumatic components.

PAPER - II

1. Electrical Machines and Power Transformers Magnetic Circuits analysis and Design of Power transformers. Construction and testing. Equivalent circuits. Losses and efficiency. Regulation. Auto- transformer, 3-phase transformer. Parallel operation. Basic concepts in rotating machines. EMF, torque, basic machine types. Construction and operation, leakage losses and efficiency. D.C. Machines. Construction, Excitation methods. Circuit models. rmature reaction and commutation. Characteristics nd performance analysis. Generators and motors. Starting and speed control. esting, Losses and efficiency. Synchronous Machines. Construction. Circuit model. Operating characteristics and performance nalysis. Synchronous reactance. Efficiency. Voltage regulation. Salient-pole machine, Parallel operation. Hunting. Short circuit transients. Induction Machines. Construction. Principle of operation. Rotating fields. Characteristics and performance analysis. determination of circuit model. Circle diagram. Starting and speed control. Fractional KW motors. Single-phase synchronous and induction motors.

2. Power systems Types of Power Stations, Hydro, Thermal and Nuclear Stations. Pumped storage plants. economics and operating factors. Power transmission lines. Modeling and performance characteristics. Voltage control. Load flow tudies. Optimal power system operation. Load frequency control. Symmetrical short circuit analysis. Z-Bus formulation. symmetrical Components. Per Unit representation. Fault analysis. Transient and steady-state stability of power systems. Equal rea criterion. Power system Transients. Power system Protection Circuit breakers. Relays. HVDC transmission.

3. ANALOG AND DIGITAL ELECTRONICS AND CIRCUITS Semiconductor device physics, PN junctions and transistors, circuit models and parameters, ET, Zener, tunnel, Schottky, photo diodes and their applications, rectifier circuits, voltage regulators and multipliers, switching behavior of diodes and transistors. Small signal amplifiers, biasing circuits, frequency response and improvement, multistage amplifiers and feed-back amplifiers, D.C. amplifiers, coupling methods, push pull amplifiers, operational amplifiers, wave shaping circuits. Multi vibrators and flip-flops and their applications. Digital logic gage families, universal gates- combinational circuits for arithmetic and logic operational, sequential logic circuits. Counters, registers, RAM and ROMs.

4. MICROPROCESSORS Microprocessor architecture-Instruction set and simple assembly language programming. Interfacing for memory and I/O. applications of Micro-processors in power system.

5. COMMUNICATION SYSTEMS Types of modulation; AM, FM and PM. Demodulators. Noise and bandwidth considerations. Digital communication systems. Pulse code modulation and demodulation. elements of sound and vision broadcasting. Carrier communication. Frequency division and time division multiplexing, Telemetry system in power engineering.

6. POWER ELECTRONICS Power Semiconductor devices. Thyristor. Power transistor, GTOs and MOSFETs. Characteristics and operation. AC to DC Converters; 1-phase and 3-phase DC to C Converters. AC regulators. Thyristor controlled reactors; switched capacitor networks. Inverters; single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

the syllabus available in various website and i am attached the syllabus

of IES EEE branch check and prepare the according to the syllabus and

concepts are important and don't leave any topic and see the previous papers

it will useful to you.

Originally Posted by Unregistered

i need the complete details of ies syllabus for eee branch. how to prepare for the exam to get top marks.





----mikitha-----

Dear friend;
Greeting for the day;

I have attached the full syllabus in a pdf format.please find the attachment.
You can download the previous year question paper from the given link.

http://gateiesjto.com/IES/PreEEEObjective.html

You will have to regular study to all the subjects and try to read daily news paper to know the current affairs and increase your general awareness by reading some excellent magazine.solve previous year question papers in the given time limitation and speed and correctness.


All the Best & Good Luck
Thanks

Hello,

As per you request, I have attached the syllabus for EEE for IES exam. You can view the attachment for the same.

IES 2011 written Exam date : 14.05.2011

Hello,

Well its good that you are appearing for IES exam.I have attached the syllabus for this exam.You can refer it.You can find a complete detail for this exam.You need to refer gate syllabus.Prepare well.

you will get the syllabus of IES EEE here:

http://www.threeauthors.com/upsc-exams/UPSC-syllabus-iees-ele.asp

the whole syllabus is given here.......................

Materials and Components :
Structure and properties of Electrical Engineering materials; Conductors, Semiconductors and Insulators, magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Super-conducting materials. Passive components and characteristics Resistors, Capacitors and Inductors; Ferrites, Quartz crystal Ceramic resonators, Electromagnetic and Electromechanical components.

2. Physical Electronics, Electron Devices and ICs:
Electrons and holes in semiconductors, Carrier Statistics, Mechanism of current flow in a semiconductor, Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction transistor; Field effect transistors; Power switching devices like SCRs, GTOs, power MOSFETS; Basics of ICs - bipolar, MOS and CMOS types; basic of Opto Electronics.

3. Signals and Systems
Classification of signals and systems: System modelling in terms of differential and difference equations; State variable representation; Fourier series; Fourier transforms and their application to system analysis; Laplace transforms and their application to system analysis; Convolution and superposition integrals and their applications; Z-transforms and their applications to the analysis and characterisation of discrete time systems; Random signals and probability, Correlation functions; Spectral density; Response of linear system to random inputs.

4. Network theory
Network analysis techniques; Network theorems, transient response, steady state sinusoidal response; Network graphs and their applications in network analysis; Tellegen's theorem. Two port networks; Z, Y, h and transmission parameters. Combination of two ports, analysis of common two ports. Network functions : parts of network functions, obtaining a network function from a given part. Transmission criteria : delay and rise time, Elmore's and other definitions effect of cascading. Elements of network synthesis.

5. Electromagnetic Theory
Analysis of electrostatic and magnetostatic fields; Laplace's and Poisson's equations; Boundary value problems and their solutions; Maxwell's equations; application to wave propagation in bounded and unbounded media; Transmission lines : basic theory, standing waves, matching applications, microstrip lines; Basics of wave guides and resonators; Elements of antenna theory.

6. Electronic Measurements and instrumentation
Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working : analog and digital, comparison, characteristics, application. Transducers; Electronic measurements of non electrical quantities like temperature, pressure, humidity etc; basics of telemetry for industrial use.

ELECTRONICS & TELECOMMUNICATION ENGINEERING PAPER - II
(For both objective and conventional type papers)

1. Analog Electronic Circuits :
Transistor biasing and stabilization. Small signal analysis. Power amplifiers. Frequency response. Wide banding techniques. Feedback amplifiers. Tuned amplifiers. Oscillators. Rectifiers and power supplies. Op Amp, PLL, other linear integrated circuits and applications. Pulse shaping circuits and waveform generators.

2. Digital Electronic Circuits :
Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaguh map and applications; IC Logic gates and their characteristics; IC logic families : DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic Circuits; Half adder, Full adder; Digital comparator; Multiplexer Demulti-plexer; ROM an their applications. Flip flops. R-S, J-K, D and T flip-flops; Different types of counters and registers Waveform generators. A/D and D/A converters. Semiconductor memories.

3. Control Systems :
Transient and steady state response of control systems; Effect of feedback on stability and sensitivity; Root locus techniques; Frequency response analysis. Concepts of gain and phase margins: Constant-M and Constant-N Nichol's Chart; Approximation of transient response from Constant-N Nichol's Chart; Approximation of transient response from closed loop frequency response; Design of Control Systems, Compensators; Industrial controllers.

4. Communication Systems :
Basic information theory; Modulation and detection in analogue and digital systems; Sampling and data reconstructions; Quantization & coding; Time division and frequency division multiplexing; Equalization; Optical Communication : in free space & fiber optic; Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite Communication.

5. Microwave Engineering :
Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circuits, Microstrip circuits, Microwave Antennas, Microwave Measurements, Masers, lasers; Microwave propagation.
Microwave Communication Systems terrestrial and Satellite based.

6. Computer Engineering :
Number Systems. Data representation; Programming; Elements of a high level programming language PASCAL/C; Use of basic data structures; Fundamentals of computer architecture; Processor design; Control unit design; Memory organisation, I/o System Organisation. Microprocessors : Architecture and instruction set of Microprocessors 8085 and 8086, Assembly language Programming. Microprocessor Based system design : typical examples. Personal computers and their typical uses.

hello ......
EEE students can apply under two courses whether in the electrical or the electronics engineering with some papers to be studied ........

so the syllabus has been attached with this.....

Originally Posted by Unregistered

i need the complete details of ies syllabus for eee branch. how to prepare for the exam to get top marks.





----mikitha-----

Dear friend,

The syllabus for EEE branch can be seen in the notification published

by the UPSC in the national newspapers. For your convenience I am

attaching here the notification. Kindly find and download it from

the attachment file.

For more details I would suggest you to visit the official website

of UPSC(http://www.upsc.gov.in).

Thank you...

Schedule for IES exam 2011 is as follows:-
Date of notification: 08.01.2011
Last date for receipt of application: 07.02.2011 (MONDAY)
Date of commencement of exam: 14.05.2011 (SATURDAY)
The duration of exam will be 3 DAYS.

The scheme of examination is as follows:-
There are 2 sections.
Section-1 consist of objective & conventional papers.
Section-2 will consist of personality test.

Section-1 will consist of questions related to your field of engineering.
Objective paper will consist of General Ability test(General English & General Studies.)
It will be of 2 hrs for 200 marks.
Conventional paper will consist of 2 papers of 2 hours for 200 marks each & 2 papers of 2 hours for 300 marks each.
Total it will be of 1000 marks.
Personality test will consist of candidates mental ability,leadership & thinking quality,application of there knowledge,etc,

I am attaching syllabus below ........

can you please show last year's question paper?

what is the age limit of government servent to write the ies exam

Syllabus 4 ies for ee

i want prepare for the IES and gate exams,i want improve my general skills.so tell me what r the books required?

i want prepare for IES exam,so i want the model papers of the general english and general studies.

i want prepare for IES exam.so i want the model papers of the general english and general studies.

i am complete b.tech with 55% so give me answer can i am give ies exam

sir i need total information about IES ?

I AM THE STUDENT of B.TECH 3rd year EEE branch and i want to become an IES . So please suggest me, THANKING YOU

sir, m 2nd yr student nd wil join coaching from 5th sem...
is syllabus of gate nd ies same..?? can i join gate coaching for gate as well as ies??? plz reply